Buffalo WHR-G54S
bg (G54) | |
---|---|
Buffalo AirStation 802.11b/g Wireless router | |
![]() | |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor | |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Buffalo WHR-G54S |
FCC ID | |
IC ID | |
Type |
wireless router, bridge |
CPU1 ![]() |
Broadcom BCM5352 |
CPU1 Type |
BMIPS3300 |
CPU1 Speed |
200 MHz |
Flash1 Chip |
Macronix MX29LV320CBTC-90G |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
EtronTech EM638165TS-6G x 2 |
ETH chip1 |
Broadcom BCM5352 |
Switch |
Broadcom BCM5352 |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock bootloader |
CFE |
Stock FW OS |
Linux |
Expansion IF types |
none specified |
Power |
3.3 VDC, 2 A |
Connector type |
barrel 5.5 mm (OD) 2.5 mm (ID) 10 mm (LEN) |
Serial Port (UART) |
yes, internal, unpopulated, 3.3V TTL, 9-pin header, Gemtek type1 pinout |
JTAG Port |
yes, internal, 12-pin header, unpopulated |
Additional chips | |
Other | |
Default SSID: 001601XXXXXX (2 addl. devices) | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 05 July 2005 |
ASIN |
B000Q8S1K2 ![]() |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM5352 |
Chip2 |
Broadcom BCM2050 |
Wireless interface OUI |
00:16:01 |
Antenna Connector Type |
RP-SMA |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
9 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
OEM Gemtek WRTB-133G (WRTB-133G_V00) / WRTB-134G (WRTB-134G_V01A) / WRTB-153G (WRTB-153G_V01)
The default IP for the router is 192.168.11.1 operating as an AP and 192.168.11.100 operating as a bridge.
The power adapter included with the device is a Buffalo US112-3320 (3.3V, 2A). ID/OD/Len measurements are approximate.
Links of Interest
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Current supported version: unknown
Comment:
initial flash: use Tftp flash
Please insert instructions here
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt Wiki
OpenWrt Target: brcm47xx
OpenWrt Subtarget: legacy
OpenWrt Package architecture: mipsel_mips32
Support started version: 10.03.1
Current supported version: EOL
Last Supported Version: 10.03.1
Please insert instructions here
Flashing Tomato
Please insert instructions here
Pictures
Notes
Additional information
wl revinfo
vendorid 0x14e4 deviceid 0x4318 radiorev 0x22050000 chipnum 0x5352 chiprev 0x0 corerev 0x9 boardid 0x467 boardvendor 0x14e4 boardrev 1.3 driverrev 0x4960a1d ucoderev 0x19a0876 bus 0x0
- Buffalo
- Embedded system/wireless router
- Embedded system/bridge
- Embedded System Broadcom
- Embedded System BCM5352
- Broadcom
- Embedded System BMIPS3300
- Embedded System
- Manuf Gemtek
- DD-WRT Supported
- OpenWrt Was Supported
- Tomato Supported
- Embedded System BCM2050
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation