Buffalo WHR-HP-AG108
abg (AG108) | |
---|---|
High Power Dual A + G Smart Wireless Router | |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Buffalo WHR-HP-AG108 |
FCC ID | |
Type |
wireless router |
CPU1 |
Atheros AR5312A |
CPU1 Type |
MIPS R4000 |
CPU1 Speed |
220 MHz |
Flash1 Chip |
Macronix MX29LV320ATTC-90 |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Parallel) |
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Chip |
Elpida DS2532AA-75 |
ETH chip1 |
Atheros AR5312A |
Switch |
Kendin KS8995XA |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Expansion IF types |
none specified |
Power |
5 VDC, 1.6 A |
Connector type |
barrel (EIAJ-02) 4.0 mm (OD) 1.7 mm (ID) 8 mm (LEN) |
Serial Port (UART) |
yes |
Additional chips | |
Other | |
Default SSID: 001601XXXXXX_A | |
Manuf/OEM/ODM |
Askey RT403W-D91 |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
FCC approval date | 06 May 2006 |
UPC |
747464110066 (UPC DB, On eBay) |
ASIN | B000E57E1O |
Radio 1 | |
Chip1 |
Atheros AR5312A |
Chip2 |
Atheros AR5112 |
Wireless interface OUI |
00:16:01 |
Antenna Connector Type |
RP-SMA |
Wireless Standard |
IEEE 802.11a |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio 2 | |
Chip1 |
Atheros AR5312A |
Chip2 |
Atheros AR2112 |
Wireless interface OUI |
00:16:01 |
Antenna Connector Type |
RP-SMA |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
Overview
"RT403W-D91 REV2.0" is silkscreened on the board in the FCC photos.
The firmware version flashed at the factory is 1.34.
The 802.11g radio's MAC address is 1 greater than that of the MAC used by the 802.11a radio. The WAN+LAN ports and the 802.11a radio use the same MAC address.
The power adapter included with the device is a UNIFIVE CO., LTD. AM-US100523 (5V, 2.3A).
Links of Interest
On the DD-WRT Forum
On the DD-WRT wiki
On the OpenWrt wiki
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v23 SP2
Please insert instructions here
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
Please insert instructions here
Pictures
- Buffalo
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR5312A
- Atheros
- Embedded System MIPS R4000
- Embedded System
- Embedded System Kendin
- Embedded System KS8995XA
- Kendin
- Manuf Askey
- DD-WRT Supported
- OpenWrt Supported
- Embedded System AR5112
- Embedded System IEEE 802.11a
- Embedded System AR2112
- Embedded System IEEE 802.11b/g
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- User Photo's Needed