Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.
Buffalo WHR-HP-G54
bg (G54) | |
---|---|
Wireless-G High Power Router and Access Point | |
![]() | |
Wikipedia | Buffalo Inc. |
InfoDepot Wiki | Buffalo WHR-HP-G54 |
WikiDevi.wi-cat.ru | Buffalo WHR-HP-G54 |
3rd Party Firmware | |
dd-wrt | Supported |
OpenWrt | Was Supported |
Tomato any flavor | Supported |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Buffalo WHR-HP-G54 |
FCC ID | FDI-09101577-0 |
IC ID | 6102A-002 |
Type | wireless router |
CPU1 ![]() | Broadcom BCM5352E |
CPU1 Type | BMIPS3300 |
CPU1 Speed | 200 MHz |
Flash1 Chip | Winbond W19B320ABT7H |
Flash1 Size | 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip | Mira P2V64S40ETP-G6 x 2 |
ETH chip1 | Broadcom BCM5352E |
Switch | Broadcom BCM5352E |
Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
Stock bootloader | CFE 1.0.37-1.08 BCM947XX |
Stock FW OS | Linux |
Expansion IF types | none specified |
Power | 5 VDC, 1.3 A |
Connector type | barrel |
Serial Port (UART) | yes |
Flags: | |
Additional chips | |
Other | |
Default SSID: 000D0BXXXXXX (3 addl. devices) | |
3rd Party Firmware Support |
DD-WRT • (List) , OpenWrt (Was) , Tomato • (List | DLs) |
Retail | |
Availability | End of Life |
FCC approval date | 06 August 2005 |
UPC |
747464109695 (UPC DB, On eBay) |
ASIN |
B000AOKTJ8 ![]() |
Country of manuf | Taiwan |
Radio 1 | |
Chip1 | Broadcom BCM5352E |
Chip2 | Broadcom BCM2050 |
Wireless interface OUI | 00:0D:0B, 00:16:01 |
Antenna Connector Type | RP-SMA |
Wireless Standard | IEEE 802.11b/g |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
Radio cor_rev | 9 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Buffalo devices with specifications, see Buffalo.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
Multiple revisions?
- "BCM5352-HP-EA" is silkscreened on the board in the TechInfoDepot pictures.
- "BCM5352-HP-DA" is silkscreened on the board in the FCC photos.
This device is using an Anadigics AWL6153 Power Amplifier Module.
Links of Interest
Wikis
- On the OpenWrt Wiki
- Like most low-spec b/g BCM47xx gear, using Backfire (10.03.1) would be recommended
- On the DD-WRT Wiki
Spec. sites
- If the Whirlpool data is accurate, the default SSID is the wireless interface MAC address. WiGLE data shows the XX:XX:XX:XX:XX:XX pattern described in the Whirlpool data to be somewhat less common than XXXXXXXXXXXX.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Current supported version: unknown
Comment:
initial flash: use Tftp flash
Flashing OpenWrt
![]() | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
On the OpenWrt Wiki
OpenWrt Target: brcm47xx
OpenWrt Subtarget: legacy
OpenWrt Package architecture: mipsel_mips32
Support started version: 7.09
Current supported version: EOL
Last Supported Version: 10.03.1
Please insert instructions here
Flashing Tomato
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
(3.3) (GND) (TxD) (RxD) J1 <---- board edge ----> to Flash
Pictures
- Buffalo
- Embedded system/wireless router
- Embedded System Broadcom
- Embedded System BCM5352E
- Broadcom
- Embedded System BMIPS3300
- Embedded System
- DD-WRT Supported
- OpenWrt Was Supported
- Tomato Supported
- Embedded System BCM2050
- Embedded System IEEE 802.11b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- FCC Photo's Needed