Buffalo WLA2-G54C

bg (G54)
Wireless Compact Repeater Bridge
Wikipedia	Buffalo Inc.
InfoDepot Wiki	Buffalo WLA2-G54C
WikiDevi.wi-cat.ru	Buffalo WLA2-G54C
3rd Party Firmware
dd-wrt	Supported
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Buffalo WLA2-G54C
FCC ID	FDI-09101669-0
Type	access point, bridge, repeater
CPU1	Broadcom BCM4712
CPU1 Type	BMIPS3300
CPU1 Speed	200 MHz
Flash1 Chip	Intel TE28F320J3C110
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	Dynachips D98SD6416AH-6
ETH chip1	Broadcom BCM4712
ETH chip2	IC+ IP101
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	3.3 VDC, 2 A
Connector type	barrel
Other
Default IP address: 192.168.11.100 the IP 192.168.11.100 is used by 2 additional devices of which 2 are Buffalo devices Default login user: root Default login password: blank root:blank credentials used by 72 additional devices of which 24 are Buffalo devices
Manuf/OEM/ODM	Gemtek WAPB-124G
3rd Party Firmware Support	DD-WRT • (List) , OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	28 December 2004
UPC	747464109411 (UPC DB, On eBay)
ASIN	B0006NMS74
Radio 1
Chip1	Broadcom BCM4712
Chip2	Broadcom BCM2050
Wireless interface OUI	none specified
Antenna Connector Type	MC
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	7
FCC ID Buffalo WLI3-TX1-G54 FDI-09101669-0

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

For a list of all currently documented Buffalo device with specifications, see Buffalo.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

OEM Gemtek WAPB-124G (WAPB-124G V01)

Links of Interest

• Quick start guide
  • WLA2-G54C : JTAG Questions... On the DD-WRT Forum

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = v23 SP3

initial flash: use ddadder or Tftp flash

Please insert instructions here

Flashing OpenWrt

On the OpenWrt Forum
Support started version: ?
Current supported version: ?

OpenWrt HOWTO

Please insert instructions here

JTAG-Serial Info

JTAG

JTAG Pinouts

JTAG Pinouts

nTRST   1o o2	GND
  TDI   3o o4	GND
  TDO   5o o6	GND
  TMS   7o o8	GND
  TCK   9o o10	GND
nSRST  11o o12  N/C

Using Universal JTAG Adapter

white    1o o2	 black
  red    3o o4	 GND
 blue    5o o6	 GND
green    7o o8	 GND
yelow    9o o10  GND
orange  11o o12  N/C

• /noemw switch required

JTAG Recovery

1. Backup CFE x2 (Compare the files, they must match exactly or there is something wrong with your JTAG setup)
2. Erase Wholeflash x2
3. Flash CFE
4. Unplug Power
5. Unplug JTAG Cable

TFTP:

1. Set Rig ip static 192.168.1.10
2. Plug network cable from rig to port 1
3. Plug in power
4. click upgrade.
5. wait, wait, wait. If you cannot browse the GUI of the router, return to step 1.
6. Hard Reset 30\30\30