Buffalo WZR-HP-G302H
bgn (N300) | |
---|---|
wireless router | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Buffalo WZR-HP-G302H |
FCC ID |
none specified |
Type |
wireless router |
CPU1 |
Atheros AR7242 |
CPU1 Type |
MIPS 24Kc |
CPU1 Speed |
400 MHz 32-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Atheros AR7242 |
Switch |
Atheros AR8316 |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Stock bootloader |
U-Boot |
Expansion IF types |
USB 2.0 |
USB ports |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1.5 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 3.3, 115200 / 8N1 |
Other | |
Default SSID: XXXXXXXXXXXX (3 addl. devices) | |
3rd Party Firmware Support | |
Retail | |
Country of manuf | China |
Radio 1 | |
Chip1 |
Atheros AR9283 |
Wireless interface OUI |
4C:E6:76 |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Buffalo device with specifications, see Buffalo.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
WZR-HP-G300NH2 on the OpenWrt wiki (w/ boot log for the G302H)
- The WZR-HP-G302H appears to be a Japanese variant of the G300NH2
- "WZR-HP-G302HV2" and "21514W302HV21A2 Rev:A2" is silkscreened on the board.
- AR9283-AL1A Wi-Fi chip
- appears to be shipping with U-Boot 1.08, serial console disabled
The default IP is 192.168.11.1 w/ router mode on or 192.168.11.100 w/ router mode off. The default SSID appears to be the MAC address (upper case hex letters, no delimiters between octets).
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details. This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now. |
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 19.07.0
Current supported version: 23.05.5
Please insert instructions here
- Buffalo
- Embedded system/wireless router
- Embedded System Atheros
- Embedded System AR7242
- Atheros
- Embedded System MIPS 24Kc
- Embedded System
- Embedded System AR8316
- OpenWrt Supported
- Embedded System AR9283
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation