COMFAST CF-E110N

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Long Range WIFI Outdoor CPE
Homepage Product page
WikiDevi.wi-cat.ru COMFAST CF-E110N
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev COMFAST CF-E110N v1
FCC ID OYRE380AC
Type access point, CPE
CPU1 checkY Qualcomm Atheros QCA9531
CPU1 Type MIPS 24Kc
CPU1 Speed 650 MHz
Flash1 Chip cFeon EN25Q64HIP
Flash1 Size 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip Winbond Model?
ETH chip1 Qualcomm Atheros QCA9531
Switch Atheros AR8229
Ethernet Port Count 2-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types none specified
PoE 802.3at, 802.3af, standard
Power 48 VDC, 0.3 A
Connector type PoE
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Qualcomm Atheros QCA9531
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
 FCC ID
COMFAST CF-E355AC V1OYRE380AC
COMFAST CF-E380ACOYRE380AC

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented COMFAST devices with specifications, see COMFAST.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 18.06.1
Current supported version: 25.12.0
LAN Comment: Atheros AR8229, PoE in (both)
WLAN Comment: Qualcomm Atheros QCA9531
Installation method(s):
see git-commit
Install Comment:
firmware_auto.bin loaded from 192.168.1.10 at startup through tftp
Recovery method(s):
GUI generic, U-Boot TFTP + serial recovery, U-Boot web recovery
Comment:
Up to 18.06.2: Use CF-E320N firmware as it is compatible but beware LAN and WAN are inverted compared to what is printed on the case; v2 supported in ath79 with dedicated image.
git • >> 
ath79: add support for COMFAST CF-E110N
This patch adds support for the COMFAST CF-E110N, an outdoor wireless
CPE with two Ethernet ports and a 802.11bgn radio.

Specifications:

 - 650/400/216 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, both with PoE-in support
 - 64 MB of RAM (DDR2)
 - 16 MB of FLASH
 - 2T2R 2.4 GHz, up to 26 dBm
 - 11 dBi built-in antenna
 - POWER/LAN/WAN/WLAN green LEDs
 - 4x RSSI LEDs (2x red, 2x green)
 - UART (115200 8N1) and GPIO (J9) headers on PCB

Flashing instructions:

 The original firmware is based on OpenWrt so a sysupgrade image can be
 installed via the stock web GUI. Settings from the original firmware
 will be saved and restored on the new want, so a factory reset will be
 needed: once the new firmware is flashed, perform the factory reset by
 pushing the reset button several times during the boot process, while the
 WAN LED flashes, until it starts flashing quicker.

 The U-boot bootloader contains a recovery HTTP server to upload the
 firmware. Push the reset button while powering the device on and keep it
 pressed for >10 seconds. The recovery page will be at http://192.168.1.1

Notes:

 The device is advertised, sold and labeled as "CF-E110N", but the
 bootloader and the stock firmware identify it as "v2".

Acknowledgments:

 Petr Štetiar <ynezz@true.cz>
 Sebastian Kemper <sebastian_ml@gmx.net>
 Chuanhong Guo <gch981213@gmail.com>

See also

Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=COMFAST_CF-E110N&oldid=516623"