COMFAST CF-E320N V2

bgn (N300)
Wireless Ceiling Indoor Ap
WikiDevi.wi-cat.ru	COMFAST CF-E320N
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Was Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	COMFAST CF-E320N V2
FCC ID	none specified
Type	access point, CPE
CPU1 Y	Qualcomm Atheros QCA9531
CPU1 Type	MIPS 24Kc
CPU1 Speed	650 MHz
Flash1 Chip	Brand? Model?
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2)
RAM1 Chip	Brand? Model?
ETH chip1	Qualcomm Atheros QCA9531
Switch	Qualcomm Atheros QCA9531
Ethernet Port Count	2-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	none specified
Power	48 VDC, ? A
Serial Port (UART)	yes
Other
3rd Party Firmware Support	OpenWrt (Was)
Radio 1
Chip1	Qualcomm Atheros QCA9531
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented COMFAST devices with specifications, see COMFAST.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Links of Interest

https://comfastwifi.us/comfast-e320n-v2-300mbps-wireless-access-point-24g-ceiling-ap-wifi-router-indoor-ap

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: ar71xx
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 17.01.0
Current supported version: EOL
Last Supported Version: 19.07.10

LAN Hardware: Qualcomm Atheros QCA9531
WLAN Hardware: Qualcomm Atheros QCA9531
Installation method(s):
GUI OEM, see git-commit
Comment:
Final version: 19.07.10

git • >>

ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N As we already have support for CF-E316N v2 and many devices from this vendor look similar, the support was included in existing mach-*.c file, with few cleanups and fixes. All 3 devices are based on Qualcomm/Atheros QCA9531 v2. COMFAST CF-E320N v2 is a ceiling mount AP with PoE support. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, both with PoE support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x RGB LED, 1x button - UART (J1), GPIO (J9) and USB (J2) headers on PCB - external watchdog (Pericon Technology PT7A7514) COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support. They seem to have different only the front panel. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, WAN with PoE support - 1x USB 2.0 (in CF-E520N covered by panel, available on PCB) - 32 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x LED, 1x button - UART (J1) headers on PCB Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI.