Calao Systems USB-A9G20
From TechInfoDepot
Jump to navigationJump to search
Single Board Computer | |
3rd Party Firmware | |
---|---|
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | Calao Systems USB-A9G20 |
Type | single-board computer |
CPU1 ![]() | Atmel AT91SAM9G20 |
CPU1 Type | ARM926EJ-S |
CPU1 Speed | 400 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Brand? Model? |
ETH chip1 | Atmel AT91SAM9G20 |
Ethernet Port Count | 1-100MbE-LAN |
Wired Standard | IEEE 802.3i/3u |
| |
Stock bootloader | U-Boot |
Expansion IF types | USB 2.0 |
USB ports | 2 |
USB Hub Compatible | Untested |
Power | 5 VDC, ? A |
Connector type | USB |
Serial Port (UART) | yes, 5, (115200 8N1) |
JTAG Port | yes |
| |
| |
Other | |
| |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 17.01.1
Current supported version: 24.10.2
WLAN Comment:
No WLAN
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 17.01.1
Current supported version: 24.10.2
WLAN Comment:
No WLAN
Please insert instructions here