CastleNet ASW915N+

bgn (N300)
wireless router, dsl modem
WikiDevi.wi-cat.ru	CastleNet ASW915N+
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	CastleNet ASW915N+
FCC ID	RK9-ASW915N
Type	wireless router, dsl modem
CPU1	Broadcom BCM6358U
CPU1 Type	BMIPS4350
CPU1 Speed	not specified ( 2 cores )
Flash1 Chip	Macronix MX29LV640EBTI-70G
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	? MiB
RAM1 Chip	Mira Model?
ETH chip1	Broadcom BCM6358U
Switch	Broadcom BCM5325E
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	USB 2.0
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1 A
Connector type	barrel
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1325 additional devices of which 3 are CastleNet devices Default login user: admin Default login password: admin admin:admin credentials used by 1343 additional devices of which 0 are CastleNet devices
Retail
FCC approval date	10 September 2009
Radio 1
Chip1	Broadcom BCM4322
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	16
FCC ID DQ Technology VisionNet M505N QMPM505N RK9-ASW915N

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented CastleNet device with specifications, see CastleNet.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

The FCC test report lists an additonal model of M505N (VisionNet M505N?) which is also pictured as having removable (RP-SMA connector) antennas. The ASW915N+ is pictured as having integral antennas.

"PN:2PB-AS9150-X20R(OSP)" and "ASW915N_X2" is silkscreened on the board in the FCC photos.

The device appears to be using a MX29LV640EBTI-70G Flash chip.. and this device also uses two SiGe 2528L / SE2528L 2.4GHz power amplifiers.

The default credentials in this entry are from the FCC manual.