Celeno VXT1025
From TechInfoDepot
Jump to navigationJump to searchan (A300) | |||||
|---|---|---|---|---|---|
| bridge | |||||
| WikiDevi.wi-cat.ru | |||||
| 3rd Party Firmware | |||||
| dd-wrt |
Status Unknown | ||||
| OpenWrt |
Status Unknown | ||||
| Tomato any flavor |
Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev |
Celeno VXT1025 | ||||
| FCC ID | |||||
| IC ID | |||||
| Type |
bridge | ||||
| CPU1 |
Ralink RT2880 | ||||
| CPU1 Type |
MIPS 4KEc | ||||
| CPU1 Speed |
266 MHz | ||||
| Flash1 Chip |
Samsung Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||
| RAM1 Chip |
Samsung K4S281632K | ||||
| ETH chip1 |
Ralink RT2880 | ||||
| ETH chip2 |
Realtek Model? | ||||
| Ethernet Port Count |
1-100MbE-LAN | ||||
| Wired Standard |
IEEE 802.3i/3u | ||||
| Expansion IF types |
none specified | ||||
| Power |
5 VDC, ? A | ||||
| Connector type |
barrel | ||||
| Other | |||||
|
Default IP address: 10.0.0.10 | |||||
| Retail | |||||
| FCC approval date | 03 November 2009 | ||||
| Radio 1 | |||||
| Chip1 |
Ralink RT2880 | ||||
| Chip2 |
Ralink RT2850 | ||||
| Wireless interface OUI |
00:0B:8C | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11a/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11a |
up to 54 Mbps | ||||
| WiFi Operating Frequency |
5 GHz | ||||
| |||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Celeno device with specifications, see Celeno.
- • 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class
Overview
"Celeno Wireless Communications", "Patent Pending Celeno Proprietary", "CELENO CLIENT" and "P/N BOARD: PCB00021" is silkscreened on the board in the FCC photos.
The test report specifies additional models of VXT1025 and WAP-5831.
This device is presumed to use RT2850.
The FCC manual states the default IP is 10.0.0.10.
