Celeno VXT1300

From TechInfoDepot
Jump to navigationJump to search
an (A300)
access point,bridge
WikiDevi.wi-cat.ru Celeno VXT1300
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Celeno VXT1300
FCC ID XQOMWB-1305
IC ID 5248U-MWB1305
Type access point, bridge
CPU1 checkY Celeno CL1300
CPU1 Type MIPS 4KEc
CPU1 Speed not specified
Flash1 Chip Brand? Model?
Flash1 Size ? MiB
RAM1 Size ? MiB
RAM1 Chip Brand? Model?
ETH chip1 Celeno CL1300
ETH chip2 IC+ IP101A
Ethernet Port Count 1-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 00:0B:8C (3 E, 3 W)
Ethernet OUI: 00:0B:8C (3 E, 3 W)

Expansion IF types none specified
Power 12 VDC, ? A
Connector type barrel
Other

Default IP address: 10.0.0.2
the IP 10.0.0.2 is used by 9 additional devices
of which 0 are Celeno devices

Retail
FCC approval date 04 November 2009
Radio 1
Chip1 Celeno CL1300
Chip2 Maxim MAX2828
Chip3 Maxim MAX2828
Wireless interface OUI 00:0B:8C
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11a/n
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
Flextronics MWB1305XQOMWB-1305

For a list of all currently documented Celeno (Ralink) chipsets with specifications, see Celeno.
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Maxim chipsets with specifications, see Maxim.

For a list of all currently documented Celeno devices with specifications, see Celeno.

300 Mbps - 2SS 5GHz 802.11n (40MHz chan.) = A300 class

Overview

  • The Celeno logo, "Patent Pending Celeno Proprietary", "CELENO VXT1300 AP", and "P/N BOARD: PCB00020" is silkscreened on the board in the FCC photos.
  • Per the FCC test report, the device "utilizes 4 internal printed antennas: two transmit and two receive".

The FCC manual states the default IP is 10.0.0.2.