Check Point L-50W

multiple revisions of this device, use caution

bgn (N300)
Check Point L-50W Network Appliance with 8-Port Gigabit LAN Switch & 802.11N Wireless
Homepage	Product page
WikiDevi.wi-cat.ru	Check Point L-50W
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Check Point L-50W
Model Part Number	CPAP-SG1140/SG620
FCC ID	PZ7-67897
IC ID	9519B-67897
Type	network security platform
CPU1 Y	Marvell 88F6281
CPU1 Type	ARMv5
CPU1 Speed	1.2 GHz
Flash1 Chip	SK hynix H27U4G8F2DTR-BC
Flash1 Size	512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND)
RAM1 Size	512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip	Nanya NT5TU128M8HE-AC x 4
ETH chip1	Marvell 88F6281
ETH chip2	Marvell 88E1116R
ETH chip3	Marvell 88E6171R
Ethernet Port Count	2-1GbE-WAN 8-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 48:A9:D2 Ethernet OUI: 00:1C:7F (9 E, 3 W)
Stock bootloader	U-Boot 1.1.4 Check Point version: 983002045
Stock FW OS	Linux 2.6.22.18 Check Point SecurePlatform Embedded
Expansion IF types	USB 2.0, ExpressCard/34 (USB), SD Card slot
ExpressCard slots	1
USB ports	2
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	12 VDC, 2.5 A
Connector type	barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN)
Serial Port (UART)	yes, RJ45 console, (115200 8N1)
Flags: RTC w/ battery backup, metal case, heatsink, SD Card slot
Additional chips RS-232 transciever;Intersil;ICL3243E;;1; USB 2.0 Hub Controller;NEC;μPD720114;;1; 2-Wire RTC;Seiko;S-35390A;;1; 3A Synchronous Step-Down Switcher w/Integrated FET;TI;TPS54327;;2; 2A, 18V Synchronous Rectified Step-Down Converter;MPS;MP1482DS;;1; 4.5V to 18V Input, Synchronous Step-Down Three Buck Switcher;TI;TPS65251;;1; 30V P-Channel MOSFET;Fairchild;FDS9435A;;1;
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1359 additional devices of which 7 are Check Point devices
Manuf/OEM/ODM	SerComm SG80A L-50W
3rd Party Firmware Support	OpenWrt (unofficial)
Retail
Availability	End of Life
End of Life date	2020
FCC approval date	03 May 2013
(Est.) release date	2013
UPC	6370778195927 (UPC DB, On eBay)
ASINs	B07B1HX637 B018955PB6
Country of manuf	Taiwan
Radio 1
Radio1 module	Unex DNXA-97
Radio1 module IF	Mini PCIe (half)
Chip1	Atheros AR9287
Wireless interface OUI	48:A9:D2
Antenna Connector Type	SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID Check Point L-50WD PZ7-67897
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Check Point L-50 Marvell Check Point L-50W Marvell Atheros Check Point L-50WD Marvell Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Check Point devices with specifications, see Check Point.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Check Point L-50W - 8 Port Gigabit Firewall Appliance

CPAP-SG1140-NGTP-W-FCCA

CPAP-SG620-FW-W-WORLD

Links of Interest

• User Group FAQ

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki

Target: kirkwood
Subtarget: generic
Package architecture: arm_xscale
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.5

Unsupported Functions:
DSL modem
LAN Hardware: 2x Marvell 88E6171
WLAN Hardware: Atheros AR9287 (mini-PCIe)
Installation method(s):
See devicepage, see git-commit
Recovery method(s):
Serial
Recovery Comment:
Serial + kwboot tool

git • >>

kirkwood: add support for Check Point L-50 This patch adds support for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6281 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Known issues: -DSL not supported -Expresscard not tested Installation: Step one -> backup: make backup u-boot and env for revert stock posibility make backup dsl_mac_addr, dmz_mac_addr, eth1addr, ethaddr and all lanX_mac_addr Step two -> Use kwboot tool to upload openwrt u-boot to RAM: run kwboot: "kwboot -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p -t" end start u-boot Step three -> Restore macs (e.g. below): setenv eth1addr 00:1C:XX:XX:XX:6C setenv ethaddr 00:1C:XX:XX:XX:6B setenv lan1_mac_addr 00:1C:XX:XX:XX:6C setenv lan2_mac_addr 00:1C:XX:XX:XX:6D setenv lan3_mac_addr 00:1C:XX:XX:XX:6E setenv lan4_mac_addr 00:1C:XX:XX:XX:6F setenv lan5_mac_addr 00:1C:XX:XX:XX:70 setenv lan6_mac_addr 00:1C:XX:XX:XX:71 setenv lan7_mac_addr 00:1C:XX:XX:XX:72 setenv lan8_mac_addr 00:1C:XX:XX:XX:73 setenv dmz_mac_addr 00:1C:XX:XX:XX:74 setenv dsl_mac_addr 00:1C:XX:XX:XX:75 Step four -> flash u-boot: mw 0x0800000 0xffff 0x100000 nand erase 0x0 100000 tftp 0x0800000 openwrt-kirkwood-l50-u-boot.kwb nand write 0x0800000 0x0 0x100000 saveenv Step five -> run initramfs image: tftpboot 0x02000000 openwrt.bin; bootm 0x02000000; Step six -> install sysupgrade OpenWrt image: copy to /tmp/ sysupgrade image run sysupgrade Back to stock: Restore original u-boot end env. Install factory image via stock u-boot.