Check Point L-50WD

multiple revisions of this device, use caution

bgn (N300)
Check Point L-50W Network Appliance with 8-Port Gigabit LAN Switch & 802.11N Wireless & ADSL annex A
WikiDevi.wi-cat.ru	Check Point L-50WD
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Check Point L-50WD
FCC ID	PZ7-67897
IC ID	9519B-67897
US ID	FK1DL01BL50
Board ID	490ADK00C-1.6MM
Type	security appliance
CPU1 Y	Marvell 88F6281
CPU1 Type	ARMv5
CPU1 Speed	1.2 GHz
CPU2 ?	Conexant GS8120
Flash1 Chip	Samsung K9F4G08U0D-SCB0
Flash1 Size	512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (NAND)
Flash2 Chip	Atmel AT45DB161D
Flash2 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR2 SDRAM)
RAM1 Chip	Nanya NT5TU128M8GE-AC x 4
RAM2 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM2 Chip	EtronTech EM638165TS-6G
ETH chip1	Marvell 88F6281
ETH chip2	Marvell 88E1116R
ETH chip3	Marvell 88E6171R
DSL Ports	1
Ethernet Port Count	2-1GbE-WAN 8-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 24:0A:64 (1 E, 6 W) Ethernet OUI: 00:1C:7F (9 E, 3 W)
Stock bootloader	U-Boot 1.1.4 Check Point version: 983002045
Stock FW OS	Linux 2.6.22.18 KW LSP 4.2.7 patch39
Expansion IF types	Mini PCIe, ExpressCard/34 (USB), USB 2.0, SD Card slot
ExpressCard slots	1
Mini PCIe slots	1
USB ports	2
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	12 VDC, 2.5 A
Connector type	barrel 5.5 mm (OD) 2.1 mm (ID) 9.5 mm (LEN)
Serial Port (UART)	yes, RJ-45 console, (115200 8N1)
Flags: ADSL, RTC w/ battery backup, metal case, heatsink
Additional chips ADSL Transceiver;Ikanos;BAZ-3882-NCAZ;;1; 2-Wire RTC;Seiko;S-35390A;;1; RS-232 transciever;Intersil;ICL3243E;;1; USB 2.0 Hub Controller;NEC;μPD720114;;1; 30V P-Channel MOSFET;Fairchild;FDS9435A;;1; 3A Synchronous Step-Down Switcher w/ Integrated FET;TI;TPS54327;;2; 2A, 18V Synchronous Rectified Step-Down Converter;MPS;MP1482DS;;2; 4.5V/18V Synchronous Step-Down Three Buck Switcher;TI;TPS65251;;1; Quadruple Bilateral Analog Switch;TI;SN74LV4066A;;2;
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1359 additional devices of which 7 are Check Point devices Default login user: admin Default login password: set on first login admin:set on first login credentials used by 1 additional devices of which 1 are Check Point devices
Manuf/OEM/ODM	SerComm SG80A L-60WD
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	03 May 2013
Radio 1
Radio1 module	AzureWave AW-NE121H
Radio1 module IF	Mini PCIe (half)
Chip1	Atheros AR9287
Wireless interface OUI	24:0A:64
Antenna Connector Type	U.FL, SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID Check Point L-50W PZ7-67897
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Check Point L-50 Marvell Check Point L-50W Marvell Atheros Check Point L-50WD Marvell Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Check Point devices with specifications, see Check Point.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

Check Point L-50WD - 8 Port Gigabit Firewall Appliance

CPAP-SG1140-NGTP-W-ADSL-A-FCCA

CPAP-SG640-NGTP-W-ADSL-A-FCCA

Hardware specification

• CPU: Marvell 88F6281 ARM v5 (@1.2GHz)
• Memory: 512MB (SDRAM) DDR2
• Storage: 512MB NAND Flash, SD Card Slot
• WiFi: Atheros AR9287 (802.11bgn)
• Network: 12x Gigabit Ethernet
• USB: 2x USB 2.0 ports

Links of Interest

User Group FAQ

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki

Target: kirkwood
Subtarget: generic
Package architecture: arm_xscale
Supported Since Commit
Support started version: 21.02.0
Current supported version: 24.10.4

LAN Hardware: 2x Marvell 88E6171
WLAN Hardware: Atheros AR9287 (mini-PCIe)
Installation method(s):
See devicepage, see git-commit
Recovery method(s):
Serial
Recovery Comment:
Serial + kwboot tool

git • >>

kirkwood: add support for Check Point L-50 This patch adds support for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6281 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Known issues: -DSL not supported -Expresscard not tested Installation: Step one -> backup: make backup u-boot and env for revert stock posibility make backup dsl_mac_addr, dmz_mac_addr, eth1addr, ethaddr and all lanX_mac_addr Step two -> Use kwboot tool to upload openwrt u-boot to RAM: run kwboot: "kwboot -B 115200 /dev/ttyUSB0 -b u-boot.kwb -p -t" end start u-boot Step three -> Restore macs (e.g. below): setenv eth1addr 00:1C:XX:XX:XX:6C setenv ethaddr 00:1C:XX:XX:XX:6B setenv lan1_mac_addr 00:1C:XX:XX:XX:6C setenv lan2_mac_addr 00:1C:XX:XX:XX:6D setenv lan3_mac_addr 00:1C:XX:XX:XX:6E setenv lan4_mac_addr 00:1C:XX:XX:XX:6F setenv lan5_mac_addr 00:1C:XX:XX:XX:70 setenv lan6_mac_addr 00:1C:XX:XX:XX:71 setenv lan7_mac_addr 00:1C:XX:XX:XX:72 setenv lan8_mac_addr 00:1C:XX:XX:XX:73 setenv dmz_mac_addr 00:1C:XX:XX:XX:74 setenv dsl_mac_addr 00:1C:XX:XX:XX:75 Step four -> flash u-boot: mw 0x0800000 0xffff 0x100000 nand erase 0x0 100000 tftp 0x0800000 openwrt-kirkwood-l50-u-boot.kwb nand write 0x0800000 0x0 0x100000 saveenv Step five -> run initramfs image: tftpboot 0x02000000 openwrt.bin; bootm 0x02000000; Step six -> install sysupgrade OpenWrt image: copy to /tmp/ sysupgrade image run sysupgrade Back to stock: Restore original u-boot end env. Install factory image via stock u-boot.

Pictures

User Images

• 
  Front
• 
  Back
• 
  Internal View
• 
  Board Top
• 
  Board Bottom
• 
  ADSL Board Top
• 
  ADSL Board Bottom