Cisco DDR2200-CL

bg (G54)
DDR2200-CL ADSL2+ Residential Gateway
Wikipedia	Cisco Systems
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	Cisco DDR2200-CL
FCC ID	MXF-ADV981119G
Type	wireless router, analog phone gateway, dsl modem
CPU1	Broadcom BCM6358
CPU1 Type	BMIPS4350
CPU1 Speed	300 MHz ( 2 cores )
Flash1 Chip	Spansion Model?
Flash1 Size	? MiB
RAM1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip	Nanya NT5DS16M16CS-5T
RAM2 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM2 Chip	Nanya NT5DS16M16CS-5T
ETH chip1	Broadcom BCM6358
Switch	Marvell 88E6061
Ethernet Port Count	4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified Ethernet OUI: 50:39:55
Expansion IF types	Mini PCI, USB 2.0, USB 2.0 (slave)
Mini PCI slots	1
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 1.67 A
Connector type	barrel
Flags: HomePNA 3.0 (coaxial), ADSL2+
Other
Default IP address: 192.168.1.254 the IP 192.168.1.254 is used by 157 additional devices of which 0 are Cisco devices Default login user: admin Default login password: 1PTV-ADM1N
Manuf/OEM/ODM	Gemtek
Retail
FCC approval date	22 December 2009
Country of manuf	China
Radio 1
Radio1 module	Gemtek WMIR-174G
Radio1 module IF	Mini PCI
Chip1	Ralink RT2561
Chip2	Ralink RT2527
Wireless interface OUI	none specified
Antenna Connector Type	none (internal)
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Cisco device with specifications, see Cisco.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

Per FCC photos...

• There are two Broadcom SoCs on the board.
  • both of which are a BCM6358KFBG
• The HomePNA controller is a CopperGate CG3011QIR-10.
• There is a Legerity chip on-board for VoIP support.
• The wireless module has a MAC label w/ a 00:26:82 (Gemtek) MAC on it.

This device is/was used by the following ISPs...

• CenturyLink

Default settings are per the FCC manual. They may very well be inaccurate.

Additional login credentials of support:1PTV-SUPP0RT and user:user are specified.

CenturyLink specifies the user login as user:user.

If the 50:39:55 OUI is used for the WLAN interface, the default SSID format may be CiscoXXXX (where XXXX is a number).

The power adapter shown in the FCC external photos is an Asian Power Devices Inc. DA-30H12 rev 1.2 (100-240VAC ~ 50-60 Hz, 0.7A max. -> 12VDC, 2.5A).