Cisco NAV10V2-WF

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
wireless router, CPE
Wikipedia Cisco Systems
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev Cisco NAV10V2-WF
FCC ID none specified
Type wireless router, CPE
CPU1 Question? Marvell Model?
CPU1 Speed 500 MHz ( 2 cores )
CPU2 Question? Marvell 98DXL07-B0
Flash1 Chip STMicro NAND01GW3B2CN6
Flash1 Size 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Size 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip Samsung K4T1G164QQ-HCF7 x 2
ETH chip1 Marvell Model?
ETH chip2 Marvell 88E1112
ETH chip3 Marvell 88E1116R
Switch Marvell Model?
Ethernet Port Count 2-WAN
8-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types USB 2.0
USB ports 1
USB Hub Compatible Untested
Power ? VDC, ? A
Connector type barrel
Other
Manuf/OEM/ODM Gemtek WRTM-255GN
Radio 1
Chip1 Ralink RT3092L
Wireless interface OUI none specified
Antenna Connector Type U.FL, RP-TNC
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Cisco devices with specifications, see Cisco.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

The SoC used may be a Marvell device (which would jive with Gemtek's board naming scheme).

There are China Telecom labels on the device in these photos.
"WRTM_255GN_V03#A" and "19K-A07-5701R RoHS" is silkscreened on the board.

The Marvell 98DXL07-B0 chip on-board, which appears to be a Packet Processor.

The 88E1112 transceiver is for the right-most WAN port (next to the switched GbE ports).
The 88E1116R transceiver is for the left-most WAN port.