Compex WPQ873

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX36002R)
Wi-Fi 6 Embedded Board supporting 5G Cellular Modem
Homepage Product page
WikiDevi.wi-cat.ru Compex WPQ873
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Compex WPQ873
Model Part Number AP-HK09
FCC ID none specified
Board ID VL873QPW
Type wireless embedded board
CPU1 checkY Qualcomm IPQ8072A
CPU1 Type ARM Cortex-A53
CPU1 Speed 2.2 GHz ( 4 cores ) 64-bit
Flash1 Chip Micron MT29F2G08ABBEAH4:4
Flash1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND)
Flash2 Chip Macronix MX25U6435FM21-10G
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR4)
RAM1 Chip Micron Model?
ETH chip1 Qualcomm IPQ8072A
ETH chip2 Qualcomm Atheros QCA8081
Switch Qualcomm Atheros QCA8075
Ethernet Port Count 1-2.5GbE-WAN
3-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types Mini PCIe, M.2 (NGFF), USB 3.0, SIM
SIM Card slot 4
Mini PCIe slots 1
USB ports 1
M.2 Slots 1
USB Hub Compatible Untested
Power 12 VDC, 2 A
Connector type barrel
Serial Port (UART) yes, 4-pin header, (115200 8N1)
JTAG Port yes, 20-pin header

Flags:
Wi-Fi 6, MU-MIMO, Bluetooth 5.0 BLE, SIM card slot

Additional chips
Bluetooth 5.0 BLE Chip;Qualcomm Atheros;QCA4024;;1;

Other
Manuf/OEM/ODM Compex
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date December 2019
Radio 1
Chip1 Qualcomm QCN5024
Wireless interface OUI none specified
Antenna Connector Type U.FL
MIMO status 4x4:4
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 1148 Mbps
802.11n up to 600 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.412~2.472 GHz
Radio 2
Chip1 Qualcomm QCN5054
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5.150~5.825 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Compex devices with specifications, see Compex.

• 1148 Mbps - 4SS 2.4GHz 802.11ax (40MHz chan.),
• 2402 Mbps - 4SS 5GHz 802.11ax (80MHz chan.) = AX3600 class

Overview

  • Wi-Fi 6 (802.11ax) Embedded Board supporting 5G Cellular Modem
Qualcomm IPQ8072A 802.11ax Reference Design (AP-HK09)
  • CPU: Qualcomm IPQ8072A @2.2GHz Quad-core (ARM Cortex-A53)
Flash: 8MB (NOR)/256MB (NAND)
RAM: 1x 512MB (up to 4GB - 1x DDR4 System Memory)
  • LAN: 3x 1Gbps Ethernet port, 1x 2.5Gbps Ethernet Port
  • 1x Mini PCIe slot, 1x M.2 (NGFF) slot, 1x USB 3.0 port
  • WLAN: Transmit power (per chain): 17dBm (2.4GHz)/17dBm (5GHz)
4×4 On-board 2.4GHz radio, up to 1182Mbps physical data rate
4x4 On-board 5GHz radio, up to 2475Mbps physical data rate

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.0
Current supported version: 24.10.5
LAN Hardware: Qualcomm Atheros QCA8075
LAN Comment: Qualcomm Atheros QCA8081 2.5GbE Phy
WLAN Hardware: Qualcomm QCN5024, Qualcomm QCN5054
WLAN Comment: 2.4GHz: 4×4:4 MU-MIMO OFDMA, 5GHz: 4×4:4 MU-MIMO OFDMA
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >> 
ipq807x: add support for Compex WPQ873
The Compex WPQ873 is a development board with two M.2 B-key
 slots for cellular modems.

Device info:
 - IPQ8072A SoC
 - 512MiB RAM
 - 256MiB NAND flash
 - 8MiB SPI NOR
 - 3x 1GigE ports
 - 1x 2.5GigE port
 - 2.4GHz/5GHz AX WLAN
 - 1x USB 3.0 port
 - 1x M.2 B-key socket with PCIe 3.0
 - 1x M.2 B-key socket with PCIe 2.0 and USB 3.0
 - 4x SIM card slots
 - Bluetooth LE 5.0 (QCA4024)

Prerequisites
1) TFTP server
2) 3.3V USB to TTL cable for UART console
   2.54mm pitch 4-pin header for UART is readily provided on board, no modifications are necessary to access it
   TTL connector pinout: 2=TX, 3=RX, 4=GND
   Arrow marks pin 1 which is 3.3V
   Serial port settings: 115200 8N1 no flow control

The device will most likely ship with a QSDK-based firmware.

1. Power on device and interrupt u-boot to obtain u-boot CLI

2. set serverip to IP address of the TFTP server, for example:

        `setenv serverip 192.168.1.10`

3. Download image from TFTP server:

        `tftpboot 0x44000000 openwrt-ipq807x-generic-compex_wpq873-squashfs-factory.ubi`

4. Flash ubi image to both partitions and reset:

        `sf probe
         imxtract 0x44000000 ubi
         nand device 0
         nand erase 0x0 0x3400000
         nand erase 0x3c00000 0x3400000
         nand write $fileaddr 0x0 $filesize
         nand write $fileaddr 0x3c00000 $filesize
         reset`

Afterwards, you can use sysupgrade to flash new OpenWRT images.

See also

Wireless embedded board • Spec.
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Compex_WPQ873&oldid=520090"