Comtrend CT-5621
From TechInfoDepot
Jump to navigationJump to search
| ADSL2+ Router | |
 | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt | Status Unknown |
| OpenWrt | Was Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Comtrend CT-5621 |
| Type | router, dsl modem |
CPU1  | Broadcom BCM6348 |
| CPU1 Type | BMIPS3300 |
| CPU1 Speed | 256 MHz |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Broadcom BCM6348 |
| Switch | Broadcom BCM6348 |
| Ethernet Port Count | 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
| |
| Stock bootloader | CFE |
| Expansion IF types | none specified |
| Serial Port (UART) | yes |
|
Flags: | |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt (Was) |
| Retail | |
| Availability | End of Life |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Comtrend devices with specifications, see Comtrend.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
Target: brcm63xx
Subtarget: generic
Package architecture: mips_mips32
Supported Since Commit
Support started version: 10.03
Current supported version: EOL
Last Supported Version: 19.07.10
Subtarget: generic
Package architecture: mips_mips32
Supported Since Commit
Support started version: 10.03
Current supported version: EOL
Last Supported Version: 19.07.10
Unsupported Functions:
DSL modem
WLAN Comment: No WLAN
Installation method(s):
CFE web recovery, see devicepage
Recovery method(s):
CFE web recovery
DSL modem
WLAN Comment: No WLAN
Installation method(s):
CFE web recovery, see devicepage
Recovery method(s):
CFE web recovery
| git • >> |
|---|
Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. SVN-Revision: 24442 |
