CreatComm TA8K
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
|---|---|
| WiFi AP | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
CreatComm TA8K |
| FCC ID |
none specified |
| Type |
access point |
| CPU1 |
Qualcomm Atheros IPQ4028 |
| CPU1 Type |
ARM Cortex-A7 |
| CPU1 Speed |
710 MHz ( 4 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Qualcomm Atheros IPQ4028 |
| Switch |
Qualcomm Atheros QCA8075 |
| Ethernet Port Count |
2-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| PoE |
PoE+ |
| Power |
48 VDC, ? A |
| Serial Port (UART) |
yes, (115200 8N1) |
| JTAG Port |
no |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: ?
Current supported version: external image
OpenWrt Target: ipq40xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: ?
Current supported version: external image
Please insert instructions here
