Cudy AP3000 Outdoor v1

multiple revisions of this device, use caution

abgn+ac+ax (AX3000)
AX3000 2.5G Wi-Fi 6 Access Point
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Cudy AP3000 Outdoor v1
FCC ID	none specified
Type	access point
CPU1 Y	MediaTek MT7981BA
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip	Brand? Model?
Flash1 Size	128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (NAND)
RAM1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip	Brand? Model?
ETH chip1	MediaTek MT7981BA
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Stock bootloader	U-Boot
Expansion IF types	none specified
PoE	802.3at, standard
Power	48-57 VDC, ? A
Connector type	PoE
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	MediaTek MT7981BA
Chip2	MediaTek MT7976CN
Wireless interface OUI	none specified
Antenna Connector Type	U.FL (internal)
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7981BA
Chip2	MediaTek MT7976CN
Wireless interface OUI	none specified
Antenna Connector Type	U.FL (internal)
MIMO status	2x3:2
Wireless Standard	IEEE 802.11a/n/ac/ax
AX-QAM	up to 2402 Mbps
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand Cudy AP3000 MediaTek MediaTek MediaTek Cudy AP3000 Outdoor v1 MediaTek MediaTek MediaTek Cudy AP3000 Wall MediaTek MediaTek MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Cudy devices with specifications, see Cudy.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),

• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.5
Current supported version: 25.12.5

WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: 2.4GHz: 2x2:2 MIMO, 5GHz: 2x3:2 MIMO
Installation method(s):
GUI OEM
Install Comment:
Need a signed OpenWrt from cudy before installing official OpenWrt image.
Recovery method(s):
see git-commit

git • >>

mediatek: filogic: add support for Cudy AP3000 Outdoor Hardware highlights: - MediaTek MT7981 WiSoC - 256MB DDR3 RAM - 64MB SPI-NAND - MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) - 1x LED in two colors - 2x Button - 1x 1GbE - Two detachable antenas, two internal pcb antenas - PoE powered (standalone) MAC: LAN MAC: label mac 2.4G MAC: label mac -1 5G MAC: label mac How to install: 1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1 2. Install OpenWrt sysupgrade image

See also

Cudy • List of 802.11ax Hardware

Cudy AP3000 (AX3000) • 2APRGAP01 MediaTek MT7981BA/MT7976CN Cudy AP3000 Outdoor Cudy M1200 (AC1200) Cudy M1300 (AC1200) Cudy M1800 (AX1800) • 2APRGMS01 Cudy M3000 (AX3000) • 2APRGMS30 MediaTek MT7981BA/MT7976CN Cudy RE1200 (AC1200) Cudy RE1200 Outdoor (AC1200) Cudy RE1800 (AX1800) • 2APRGRE01 Cudy RE3000 (AX3000) • 2APRGRT02 MediaTek MT7981BA/MT7976CN

Cudy TR1200 (AC1200) Cudy TR3000 (AX3000) • 2APRGRT02 MediaTek MT7981BA/MT7976CN Cudy WR1000 (AC1200) Cudy WR1200 (AC1200) Cudy WR1300 (AC1200) Cudy WR2100 (AC2100) Cudy WR2600 (AC2600) Cudy WR3000 (AX3000) • 2APRGRT02 MediaTek MT7981BA/MT7976CN Cudy WR3000H (AX3000) • MediaTek MT7981BA/MT7976CN