Cudy AP3000 Wall

multiple revisions of this device, use caution

abgn+ac+ax (AX3000)
AX3000 Wall-Plate Wi-Fi 6 Access Point
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Cudy AP3000 Wall
FCC ID	none specified
Type	access point
CPU1 Y	MediaTek MT7981BA
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip	Brand? Model?
Flash1 Size	128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND)
RAM1 Size	256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (DDR3)
RAM1 Chip	Brand? Model?
ETH chip1	Brand? Model?
Ethernet Port Count	1-1GbE-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	none specified
PoE	802.3at, 802.3af, standard
Power	48 VDC, ? A, 12 Watts
Other
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Radio 1
Chip1	MediaTek MT7981
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7981
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	3x3:2
Wireless Standard	IEEE 802.11a/n/ac/ax
AX-QAM	up to 2402 Mbps
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand Cudy AP3000 MediaTek MediaTek MediaTek Cudy AP3000 Outdoor v1 MediaTek MediaTek MediaTek Cudy AP3000 Wall MediaTek MediaTek MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Cudy devices with specifications, see Cudy.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),

• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)

Target: mediatek
Subtarget: filogic
Package architecture: unknown
Supported Since Commit
Support started version: 25.12.0
Current supported version: 25.12.5

LAN Hardware: MediaTek MT7531AE
WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: MIMO: 2.4Ghz 2x2:2, 5Ghz 2x3:2
Installation method(s):
GUI OEM
Install Comment:
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image
Recovery method(s):
U-Boot TFTP recovery

git • >>

mediatek: filogic: add support for Cudy AP3000 Wall v1 This commit adds support for the Cudy AP3000 Wall v1. SoC: MediaTek MT7981b RAM: 256MiB Flash: spi-nand spi0.0: 128 MiB Wifi: MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) LEDs: 1 LED in two colors (red & white) Buttons: 1 reset, 1 led on/off Ethernet: 5x 1GbE Power: PoE powered (standalone) The stock firmware is a customized variant of OpenWrt, which implements a signature check that only allows flashing official firmware. Cudy offers intermediate OpenWrt firmware images on their website [1][2] which do not implement the signature check. After flashing the intermediate image the upstream official OpenWrt image can be installed. The stock firmware can be recovered via TFTP using the U-Boot based boot loader[3]. Set up a TFTP server on your computer with IP 192.168.1.88/24 serving the stock firmware from Cudy's website renamed to "recovery.bin". Press and hold the reset button while powering on the device, wait for the TFTP server to send the recovery.bin file, then release the reset button. The router will take a couple of minutes to reboot and set up the stock firmware. [1] https://www.cudy.com/blogs/faq/openwrt-software-download [2] https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj [3] https://www.cudy.com/en-us/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware Signed-off-by: Derek Denk Link: https://github.com/openwrt/openwrt/pull/21266 Signed-off-by: Hauke Mehrtens