Cudy RE3000

abgn+ac+ax (AX3000)
AX3000 Dual Band Wi-Fi 6 Range Extender
Homepage	Product page
WikiDevi.wi-cat.ru	Cudy RE3000
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	Cudy RE3000 REV1.1 sp2
FCC ID	2APRGRT02
Board ID	300200004
Type	range extender
CPU1 Y	MediaTek MT7981BA
CPU1 Type	ARM Cortex-A53
CPU1 Speed	1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip	XMC XM25QH128CHIQ
Flash1 Size	16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Size	256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br />
RAM1 Chip	ESMT M15T2G16128A-DEB
ETH chip1	MediaTek MT7981BA
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: 80:AF:CA (15 E, 14 W) Ethernet OUI: 80:AF:CA (15 E, 14 W)
Stock bootloader	U-Boot 2022.07-rc3
Stock FW OS	Linux 5.4.219
Expansion IF types	none specified
Power	100-240 VAC ~ ? Hz, 0.3 A
Connector type	NEMA 1-15P
Serial Port (UART)	yes, 4-pin header, unpopulated, 3.3V TTL, (115200 8N1)
Flags: Wi-Fi 6, Mesh, MU-MIMO, WPA3, heatsink
Other
Default SSID: Cudy-Extender (2 addl. devices) Default IP address: 192.168.10.254 the IP 192.168.10.254 is used by 6 additional devices of which 6 are Cudy devices Default login user: blank Default login password: admin blank:admin credentials used by 292 additional devices of which 18 are Cudy devices
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
FCC approval date	08 June 2023
(Est.) release date	January 2023
EAN	6971690792909 (UPC DB, On eBay)
ASIN	B0BRK4BHYD
Country of manuf	China
Radio 1
Chip1	MediaTek MT7981BA
Chip2	MediaTek MT7976CN
Wireless interface OUI	80:AF:CA
Antenna Connector Type	U.FL (internal)
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n/ax
802.11ax	up to 574 Mbps
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7981BA
Chip2	MediaTek MT7976CN
Wireless interface OUI	80:AF:CA
Antenna Connector Type	U.FL (internal)
MIMO status	2x3:2
Wireless Standard	IEEE 802.11a/n/ac/ax
AX-QAM	up to 2402 Mbps
802.11ax	up to 1201 Mbps
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
FCC ID Cudy TR1200 v1 2APRGRT02 Cudy TR3000 2APRGRT02 Cudy TR3000 v1 (256MB) 2APRGRT02 Cudy WR3000 v1 2APRGRT02 Cudy WR3000 v2 2APRGRT02

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented Cudy devices with specifications, see Cudy.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),

• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Overview

Hardware specification

• CPU: MediaTek MT7981BA @1.3GHz (Filogic 820)

SoC: Dual-core ARM (Cortex-A53)

• Flash: 16MB (SPI) XMC @133MHz
• Memory: 256MB (DDR3L) SDRAM
• Wi-Fi: MediaTek MT7981BA/MT7976CN

802.11abgn/ac/ax Dual Band (2.4/5GHz)

2×2 2.4GHz + 3×3 5GHz (2×2 + Zero-wait DFS)

• Network: 1x 1GbE port
• Power Source: AC

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
On the OpenWrt Forum

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.3
Current supported version: 25.12.5

WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: 2.4GHz: 2x2:2 MIMO, 5GHz: 2X3:2 MIMO
Installation method(s):
see git-commit
Recovery method(s):
see git-commit

git • >>

mediatek: filogic: add support for Cudy RE3000 v1 MT7981B /256MB /16MB SPI (XM25QH128C) AX 2.4Ghz AX 5Ghz 160Mhz wide 1Gbit LAN OEM: root@RE3000:~# ifconfig |grep HWaddr br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 (label) br-wan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 ra2 Link encap:Ethernet HWaddr 82:XX:XX:28:XX:X0 rax0 Link encap:Ethernet HWaddr 82:XX:XX:38:XX:X0 rax2 Link encap:Ethernet HWaddr 82:XX:XX:58:XX:X0 OpenWrt root@OpenWrt:/# ifconfig |grep HW br-lan Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 eth0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy0-ap0 Link encap:Ethernet HWaddr 80:XX:XX:08:XX:X0 phy1-ap0 Link encap:Ethernet HWaddr 82:XX:XX:08:XX:X1 tftp Installation via u-boot: Connect TTL3.3V converter connector is under the radiator Set speed 115200 8 N 1 Interrupt boot process by holding down-arrow key during boot then >> 6. Load image >> 0 - TFTP client (Default) enter IP adresses and initramfs-kernel.bin write to flash via sysupgrade or gui

Pictures

User Images

• 
  Board Top
• 
  Internal
• 
  Power

See also

Cudy • List of 802.11ax Hardware

Cudy AP3000 (AX3000) • 2APRGAP01 MediaTek MT7981BA/MT7976CN Cudy AP3000 Outdoor Cudy M1200 (AC1200) Cudy M1300 (AC1200) Cudy M1800 (AX1800) • 2APRGMS01 Cudy M3000 (AX3000) • 2APRGMS30 MediaTek MT7981BA/MT7976CN Cudy RE1200 (AC1200) Cudy RE1200 Outdoor (AC1200) Cudy RE1800 (AX1800) • 2APRGRE01 Cudy RE3000 (AX3000) • 2APRGRT02 MediaTek MT7981BA/MT7976CN

Cudy TR1200 (AC1200) Cudy TR3000 (AX3000) • 2APRGRT02 MediaTek MT7981BA/MT7976CN Cudy WR1000 (AC1200) Cudy WR1200 (AC1200) Cudy WR1300 (AC1200) Cudy WR2100 (AC2100) Cudy WR2600 (AC2600) Cudy WR3000 (AX3000) • 2APRGRT02 MediaTek MT7981BA/MT7976CN Cudy WR3000H (AX3000) • MediaTek MT7981BA/MT7976CN