Cudy TR3000 v1 (256MB)

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn+ac+ax (AX3000)
AX3000 2.5G Wi--Fi 6 Travel Router
Homepage Product page
WikiDevi.wi-cat.ru Cudy TR3000 (256MB)
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Cudy TR3000 v1 (256MB)
FCC ID 2APRGRT02
Board ID 300100153
Type travel router, wireless router
CPU1 checkY MediaTek MT7981BA
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.3 GHz ( 2 cores ) 64-bit
Flash1 Chip ESMT Model?
Flash1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (SPI NAND)
RAM1 Size 512 MiB 536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br />
RAM1 Chip ESMT M15T4G16256A-DEB
ETH chip1 MediaTek MT7981BA
ETH chip2 Realtek RTL8221B
Ethernet Port Count 1-2.5GbE-WAN
1-1GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: 80:AF:CA (15 E, 14 W)
Ethernet OUI: 80:AF:CA (15 E, 14 W)

Stock bootloader U-Boot
Expansion IF types USB 3.0
USB ports 1
USB Hub Compatible Untested
Power 5 VDC, 3 A
Connector type USB (Type-C)
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
JTAG Port no

Flags:
Wi-Fi 6, MU-MIMO, WPA3, Mesh, heatsink

Other

Default SSID: Cudy-XXXX-5G (15 addl. devices)
, Cudy-XXXX (15 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 136 additional devices
of which 16 are Cudy devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 292 additional devices
of which 18 are Cudy devices

3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
FCC approval date 08 June 2023
(Est.) release date March 2023
EAN 6971690793050
(UPC DB, On eBay)
ASIN B0BXNCRVRC , 
multiple uses
Country of manuf China
Physical
Dimensions 4.21"L x 1.1"W x 4.21"H
Weight 220 Grams
Radio 1
Chip1 MediaTek MT7981BA
Chip2 MediaTek MT7976CN
Wireless interface OUI 80:AF:CA
Antenna Connector Type U.FL (internal)
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 MediaTek MT7981BA
Chip2 MediaTek MT7976CN
Wireless interface OUI 80:AF:CA
Antenna Connector Type U.FL (internal)
MIMO status 2x3:2
Wireless Standard IEEE 802.11a/n/ac/ax
AX-QAM up to 2402 Mbps
802.11ax up to 1201 Mbps
802.11ac up to 867 Mbps
802.11n up to 300 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz
 FCC ID
Cudy RE30002APRGRT02
Cudy TR1200 v12APRGRT02
Cudy TR30002APRGRT02
Cudy WR3000 v12APRGRT02
Cudy WR3000 v22APRGRT02
 CPU1 brandRadio1 chip1 brandRadio2 chip1 brand
Cudy TR3000MediaTekMediaTekMediaTek
Cudy TR3000 v1 (256MB)MediaTekMediaTekMediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Cudy devices with specifications, see Cudy.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 1024QAM),
• 2402 Mbps - 2SS 5GHz 802.11ax (160MHz chan., 1024QAM) = AX3000 class

Overview

Hardware specification

  • CPU: MediaTek MT7981BA @1.3GHz (Filogic 820)
SoC: Dual-core ARM (Cortex-A53)
  • Flash: 256MB (SPI NAND) @104MHz
  • Memory: 512MB (DDR3L) SDRAM
  • Wi-Fi: MediaTek MT7981BA/MT7976CN
802.11abgn/ac/ax Dual Band (2.4/5GHz)
2×2 2.4GHz + 3×3 5GHz (2×2 + Zero-wait DFS)
  • Network: 1x 2.5GbE (WAN), 1x 1GbE (LAN) ports
  • Power Source: 5V/3A via USB (Type-C) port

Flashing

Flashing OpenWrt

Target: mediatek
Subtarget: filogic
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 24.10.3
Current supported version: 25.12.5
LAN Hardware: MediaTek MT7981BA
LAN Comment: Realtek RTL8221B 2.5Gbe Phy
WLAN Hardware: MediaTek MT7981BA, MediaTek MT7976CN
WLAN Comment: 2.4GHz: 2x2:2 MIMO, 5GHz: 2X3:2 MIMO
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
Comment:
Currently, Uboot Mod image (UBI) is only available for TR3000 128MB model. There is no Uboot Mod Image for TR3000 256 MB model.
git • >> 
mediatek: add support for Cudy TR3000 256MB v1 flash version
This device is similar to the Cudy TR3000 v1 128MB version.
The difference is that the flash memory is 128mb and the other is 256mb

Hardware:
 - SoC: MediaTek MT7981B
 - CPU: 2x 1.3 GHz Cortex-A53
 - Flash: 256 MiB SPI NAND
 - RAM: 512 MiB
 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax)
 - Ethernet: 1x 10/100/1000/2500 Mbps RTL8221B WAN, 1x10/100/1000 Mbps MT7981 LAN
 - USB 3.0 port
 - Buttons: 1 Reset button, 1 slider button
 - LEDs: 1x Red, 1x White
 - Power: 5 VDC, 3 A

Installation:
Cudy has distributed intermediate firmware to make installation easier
1. Go to [Cudy CN official website](https://www.cudy.com/zh-cn/pages/download-center/tr3000-1-0) and download the intermediate firmware
2. Upgrade the intermediate firmware on the page
3. Visit the intermediate firmware 192.168.1.1 webpage and use the sysupgrade image to update

other:
If you fail to flash the device, you can use TFTP to flash back to the original firmware.
1. Ask Cudy CN official customer service for the original firmware
2. With the router off, press the RESET button. While the router is turning on, the button should continue to be pressed for at least 5 seconds.
3. A u-boot shell will automatically open.
4. Connect to LAN and set your IP to 192.168.1.88/24. Configure a TFTP server and an recovery.bin firmware file.

Pictures

User Images
  • Board Top
    Board Top
  • Board Bottom
    Board Bottom

See also

Cudy
Cudy RE1200 Outdoor (AC1200)
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=Cudy_TR3000_v1_(256MB)&oldid=538539"