D-Link DAP-2680 rev A1
From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1750) | |
---|---|
Wireless AC1750 Wave 2 Dual-Band PoE Access Point | |
![]() | |
Homepage | Product page |
Wikipedia | D-Link |
WikiDevi.wi-cat.ru | D-Link DAP-2680 rev A1 |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | D-Link DAP-2680 A1 |
FCC ID | KA2AP2680A1 |
IC ID | 4216A-AP2680A1 |
Type | access point |
CPU1 ![]() | Qualcomm Atheros QCA9558 |
CPU1 Type | MIPS 74Kc |
CPU1 Speed | 720 MHz |
Flash1 Chip | Winbond Model? |
Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size | 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip | Winbond W971GG6SB-25 x 2 |
ETH chip1 | Qualcomm Atheros QCA9558 |
Ethernet Port Count | 1-1GbE-LAN |
Wired Standard | IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Expansion IF types | none specified |
PoE | 802.3at, standard |
Power | 12 VDC, 2 A |
Connector type | barrel |
| |
Additional chips | |
Other | |
Default IP address: 192.168.0.50 | |
Manuf/OEM/ODM | Alpha Networks |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
Retail | |
FCC approval date | 27 February 2018 |
Country of manuf | China |
Radio 1 | |
Chip1 | Qualcomm Atheros QCA9558 |
Wireless interface OUI | none specified |
Antenna Connector Type | U.FL |
MIMO status | 3x3:3 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 450 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
Radio 2 | |
Chip1 | Qualcomm Atheros QCA9984 |
Wireless interface OUI | none specified |
Antenna Connector Type | U.FL |
MIMO status | 3x3:3 |
Wireless Standard | IEEE 802.11a/n/ac |
802.11ac | up to 1300 Mbps |
802.11n | up to 450 Mbps |
802.11a | up to 54 Mbps |
WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented D-Link devices with specifications, see D-Link.
Overview
Only three of the QCA9984's tx/rx chains are actually implemented so this is 3x3:3 for 5GHz.
See also: D-Link DIR-2680
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 24.10.2
LAN Comment:
Atheros AR8035 GbE Phy
WLAN Comment:
MIMO 3x3:3 both bands
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: 21.02.0
Current supported version: 24.10.2
LAN Comment:
Atheros AR8035 GbE Phy
WLAN Comment:
MIMO 3x3:3 both bands
Please insert instructions here
Pictures
Categories:
- D-Link
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9558
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Manuf Alpha Networks
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9984
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation