D-Link DCS-930L rev B1
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||
|---|---|---|---|---|---|
| Wireless Day/Night Network Surveillance Camera | |||||
 | |||||
| Wikipedia | |||||
| 3rd Party Firmware | |||||
| dd-wrt | |||||
| OpenWrt | |||||
| Tomato any flavor |
Incompatible | ||||
| Gargoyle |
Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev |
D-Link DCS-930 rev B1 | ||||
| FCC ID | |||||
| Type |
camera | ||||
| CPU1 |
Ralink RT5350F | ||||
| CPU1 Speed |
320 MHz | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
| RAM1 Chip |
Brand? Model? | ||||
| ETH chip1 |
Ralink RT5350F | ||||
| Ethernet Port Count |
1-100MbE-LAN | ||||
| Wired Standard |
IEEE 802.3i/3u | ||||
|
802dot11 OUI: none specified | |||||
| Stock bootloader |
U-Boot | ||||
| Expansion IF types |
none specified | ||||
| Power |
5 VDC, 1.2 A | ||||
| Serial Port (UART) |
yes | ||||
| Other | |||||
|
| |||||
| 3rd Party Firmware Support | |||||
| Radio 1 | |||||
| Chip1 |
Ralink RT5350F | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
1x1:1 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 150 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented D-Link device with specifications, see D-Link.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 18.06.9
Image too big: snapshot
Comment:
sysupgrade not built for 18.06.4; factory not built for snapshots (July 2019); Image build disabled in master with commit d7d46da938e3
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 18.06.9
Image too big: snapshot
Comment:
sysupgrade not built for 18.06.4; factory not built for snapshots (July 2019); Image build disabled in master with commit d7d46da938e3
Please insert instructions here
