D-Link DGS-1210-28 rev F1

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
28-Port Gigabit Smart Managed Switch
Homepage Product page
WikiDevi.wi-cat.ru D-Link DGS-1210-28 rev F1
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev D-Link DGS-1210-28 rev F1
CPU1 checkY Realtek RTL8382M
CPU1 Type MIPS 4KEc
CPU1 Speed 500 MHz
Flash1 Chip Macronix MX25L25635FMI-10G
Flash1 Size 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip Nanya NT5CC128M8GN-DI
ETH chip1 Realtek RTL8382M
ETH chip2 Realtek RTL8218B
ETH chip3 Realtek RTL8218B
ETH chip4 Realtek RTL8214FC
Switch Realtek RTL8382M
Ethernet Port Count 28-1GbE
Ethernet connector 8P8C
Wired Standard IEEE 802.3i/3u/3ab
Auto-MDIX supported
Jumbo frame yes
Switch Class smart

Ethernet OUI: 00:AD:24 (-, 1 W)

Expansion IF types SFP
SFP ports 4
Stock bootloader U-Boot 2011.12 2.1.5.67086
Stock FW OS ucLinux 2.6.19
Power 100-240 VAC ~ 50/60 Hz, 0.4 A
Connector type C13
Serial Port (UART) yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), J6
JTAG Port yes, 14-pin header, unpopulated, J5
Other

Default IP address: 10.90.90.90
the IP 10.90.90.90 is used by 8 additional devices
of which 8 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1359 additional devices
of which 77 are D-Link devices

Manuf/OEM/ODM Cameo
Flags:
Smart switch, 4x SFP/RJ45 Combo ports, LACP, SNMP, MSTP, RSTP, heatsink, metal case
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)

Additional chips
Serial Management IF/Shift Register LED Controller;Realtek;RTL8231;;1;
Single-Phase Synchronous PWM Controller;Anpec;APW8828;;1;
30V, 5A Dual P-Channel MOSFET;Alpha & Omega;AO4803;;1;
30V, 50A N-Channel MOSFET;Sinopower;SM3119NA;;1;
30V, 58A N-Channel MOSFET;Sinopower;SM3116NA;;1;
3-State Quad Buffer/Line Driver;NXP;74LVC125A;;1;
Quad 2-input AND gate;NXP;74LVC08A;;2;

Retail
(Est.) release date June 2013
Newegg 9SIAHJ3D031826
ASIN B00AI9H628
Country of manuf China
 Switch brandSwitch2 brand
D-Link DGS-1210-28 rev F1Realtek
D-Link DGS-1210-28MP rev F1Realtek
D-Link DGS-1210-28P rev F1Realtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented D-Link devices with specifications, see D-Link.

Overview

Specifications

  • Processor: Realtek RTL8382M Multi-Layer Managed
Switch Controller w/ Embedded MIPS 4KEc @500MHz
  • Flash/RAM: 32MB (SPI NOR) Flash, 128MB RAM (DDR3)
  • LAN: 24x Gigabit Ethernet (RJ45) ports,
4x GbE SFP/RJ45 Shared slots,
56Gbps switching capacity
  • Rack mountable (1U, 19")

Links of Interest

Revision	Port variants			Hardware platform

A1		10P, 16, 24, 48			Marvell
B1		10P, 20, 28(P), 52		Marvell
C1		10(P), 20, 28(P), 52(P/MP)	Broadcom
F1		10(P/MP), 26, 28(P/MP), 52(MP)	Realtek RTL838x
G1		8P, 10, 16, 24(P), 48		Realtek RTL838x
R1		10(P/MP),26,28(P/MP),52(MP/MPP)	32MB/256MB

Flashing

Flashing OpenWrt

Target: realtek
Subtarget: rtl838x
Package architecture: mips_4kec
Supported Since Commit
Support started version: 21.02.0
Current supported version: 25.12.1
LAN Hardware: Realtek RTL8382M
LAN Comment: Ethernet ports 25-28 are shared with SFP
WLAN Hardware: none
WLAN Comment: No WLAN
Installation method(s):
see git-commit
Recovery method(s):
see devicepage, see git-commit
git • >> 
rtl838x: add support for D-Link DGS-1210-28
 Hardware specification
 ----------------------

 * RTL8382M SoC, 1 MIPS 4KEc core @ 500MHz
 * 128MB DRAM
 * 32MB NOR Flash (MX25L25635E)
 * 24 x 10/100/1000BASE-T ports
    - Internal PHY with 8 ports (RTL8218B)
    - Two external PHYs with 8 ports each (RTL8218B)
 * 4 x Gigabit RJ45/SFP Combo ports
    - External PHY with 4 SFP ports (RTL8214FC)
 * Power LED
 * Reset button on front panel
 * UART (115200 8N1) via unpopulated standard 0.1" pin header marked J6

 UART pinout
 -----------

  [oooo]J3 [o]ooo|J6
    |       ^ ||`------ GND
    |       | |`------- RX
    |       | `-------- TX
    |       `---------- Vcc (3V3)
    |
    `------------------ J3 is power input connector nearby J6 UART

 Boot initramfs image from U-Boot
 --------------------------------

  1. Press Escape key during `Hit Esc key to stop autoboot` prompt
  2. Press CTRL+C keys to get into real U-Boot prompt
  3. Init network with `rtk network on` command
  4. Load image with `tftpboot 0x8f000000 openwrt-rtl838x-generic-d-link_dgs-1210-28-initramfs-kernel.bin` command
  5. Boot the image with `bootm` command

To install, upload the sysupgrade image to the OEM webpage or sysupgrade
from the system running from initramfs image.

It has been developed and tested on device with F1 revision.

Pictures

Retail Images
User Images
  • PCB, PSU
    PCB, PSU
  • Main board
    Main board

See also

DGS See also
D-Link DGS series • DSG-1210 series (SH) • DGS-1210 series (ToH)
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=D-Link_DGS-1210-28_rev_F1&oldid=519832"