Database changes have finished applying - please report any issues you're (still) seeing to support@shoutwiki.com.
D-Link DGS-1210-52 rev F1
From TechInfoDepot
Jump to navigationJump to search
52-Port Gigabit Smart Managed Switch | |
![]() | |
3rd Party Firmware | |
---|---|
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | D-Link DGS-1210-52 rev F1 |
CPU1 ![]() | Realtek RTL8393M |
CPU1 Type | MIPS 34Kc |
CPU1 Speed | 700 MHz 32-bit |
Bus | 32-bit |
Flash1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size | ? MiB |
ETH chip1 | Realtek RTL8393M |
ETH chip2 | Realtek RTL8214FC |
ETH chip3 | Realtek RTL8218B |
ETH chip4 | Realtek RTL8218B |
ETH chip5 | Realtek RTL8218B |
ETH chip6 | Realtek RTL8218B |
Switch | Realtek RTL8393M |
Ethernet Port Count | 52-1GbE |
Ethernet connector | 8P8C |
Wired Standard | IEEE 802.3i/3u/3ab |
802.1q vlan | yes |
Auto-MDIX | supported |
Jumbo frame | yes |
Switch Class | managed |
Ethernet OUI: none specified | |
Expansion IF types | SFP/RJ45 Combo |
SFP ports | 4 |
Stock bootloader | U-Boot |
Power | 100-240 VAC ~ 50/60 Hz, 0.7 A |
Connector type | C13 |
Serial Port (UART) | yes |
Other | |
| |
Flags: Smart switch, 4x SFP/RJ45 Combo ports, SNMP, LACP, MSTP, RSTP, heatsink, metal case | |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
Dimminsions |
440 x 210 x 44 mm |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented D-Link devices with specifications, see D-Link.
Overview
See also: D-Link DGS-1210-28 rev F1 and D-Link DGS series
Links of Interest
Revision Port variants Hardware platform A1 10P, 16, 24, 48 Marvell B1 10P, 20, 28(P), 52 Marvell C1 10(P), 20, 28(P), 52(P/MP) Broadcom D1 8(P), 16, 24(P), 48 Broadcom F1 10(P/MP), 26, 28(P/MP), 52(MP) Realtek RTL838x G1 8P, 10, 16, 24(P), 48 Realtek RTL838x R1 10(P/MP),26,28(P/MP),52(MP/MPP) Realtek RTL838x
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: realtek
OpenWrt Subtarget: rtl839x
OpenWrt Package architecture: mips_24kc
Support started version: 23.05.0
Current supported version: 24.10.2
Comment:
Ethernet ports 49-52 are shared with SFP
OpenWrt Target: realtek
OpenWrt Subtarget: rtl839x
OpenWrt Package architecture: mips_24kc
Support started version: 23.05.0
Current supported version: 24.10.2
Comment:
Ethernet ports 49-52 are shared with SFP
Please insert instructions here
See also
- D-Link DGS series • DSG-1210 series (SH) • DGS-1210 series (ToH)
- D-Link DGS-1210-10P rev A1 • Marvell 98DX3005
- D-Link DGS-1210-10P rev B1 • Marvell 98DX3053
- D-Link DGS-1210-10 rev F1 • Realtek RTL8380M (Spec.)
- D-Link DGS-1210-10P rev F1 • Realtek RTL8380M (Spec.) • Datasheet
- D-Link DGS-1210-10P rev R1 • Realtek RTL8380M • Datasheet
- D-Link DGS-1210-16 rev A1 • Marvell 98DX3015
- D-Link DGS-1210-16 rev G1 • Realtek RTL8382M (Spec.)
- D-Link DGS-1210-20 rev B1 • Marvell 98DX3054
- D-Link DGS-1210-24 rev A1 • Marvell 98DX3025
- D-Link DGS-1210-26 rev F1 • Realtek RTL8382M
- D-Link DGS-1210-28 rev F1 • Realtek RTL8382M (Spec.)
- D-Link DGS-1210-28P rev F1 • Realtek RTL8382M (Spec.)
- D-Link DGS-1210-28MP rev F1 • Realtek RTL8382M
- D-Link DGS-1210-52 rev F1 • Realtek RTL8393M