D-Link DI-714P+ rev B1
| b (B22) | |
|---|---|
| Enhanced 2.4GHz (802.11b) Wireless Router plus Print Server | |
|
| |
| Support | Support page |
| Wikipedia | D-Link |
| WikiDevi.wi-cat.ru | D-Link DI-714P+ rev B1 |
| 3rd Party Firmware | |
| dd-wrt | Incompatible |
| OpenWrt | Incompatible |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | D-Link DI-714+ B1 |
| FCC ID | KA2DI714PPLUS |
| Type | wireless router, print server |
| CPU1 | Conexant CX82110-51 |
| CPU1 Type | ARM ARM940T |
| CPU1 Speed | 132 MHz |
| Flash1 Chip | AMD Am29LV800BB-90EC |
| Flash1 Size | 1 MiB 1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> |
| RAM1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Chip | GLT GLT5640L16-6TC |
| ETH chip1 | Conexant CX82110-51 |
| Switch | Kendin KS8995X |
| Ethernet Port Count |
1-WAN 4-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types | Parallel |
| Paralell Ports | 1 |
| Power | 5 VDC, ? A |
| Connector type |
barrel 5.5 mm (OD) 2.2 mm (ID) 10 mm (LEN) |
|
Flags: | |
|
| |
| Other | |
|
Default SSID: default (101 addl. devices) | |
| Manuf/OEM/ODM | AMIT |
| Retail | |
| FCC approval date | 12 February 2003 |
| ASIN |
B00006SKKD |
| Country of manuf | Taiwan |
| Radio 1 | |
| Radio1 module | National Datacomm NWH1021 |
| Radio1 module IF | unknown |
| Chip1 | Texas Instruments ACX100 |
| Chip2 | Ralink Model? |
| Wireless interface OUI | none specified |
| Antenna Connector Type | RP-SMA |
| Wireless Standard | IEEE 802.11b |
| 802.11b | up to 22 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Conexant chipsets with specifications, see Conexant.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
For a list of all currently documented D-Link devices with specifications, see D-Link.
- • 22 Mbps - 2.4GHz 802.11b = B22 class
Overview
"103408600Y1" and "WPA400AM-Y1" is silkscreened on the mainboard.
It is possible these units may have differing wireless modules (which do not appear to be standard PCMCIA). This particular one uses a National Datacomm NWH1021. The FCC photos depict the device with an RFMD based DBTel card, however, the FCC photos depict a different main board (probably for the A1 revision).
The OUI of the MAC on the wireless module label is 00:80:C6 (National Datacomm). The OUI on the label affixed to the router is 00:0D:88 (D-Link).
The RP-SMA antenna leads on the case exterior are soldered directly to the wireless module.
Pictures
- D-Link
- Embedded system/wireless router
- Embedded system/print server
- Embedded System Conexant
- Embedded System CX82110-51
- Conexant
- Embedded System ARM
- Embedded System ARM940T
- Embedded System Kendin
- Embedded System KS8995X
- Kendin
- Manuf AMIT
- Embedded System Texas Instruments
- Embedded System ACX100
- Texas Instruments
- Embedded System Ralink
- Embedded System
- Ralink
- Embedded System IEEE 802.11b
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- English Documentation