D-Link DIR-610N+ rev A1

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
Wireless N 150 Home Router
D-Link-DIR-610N-plus-rev-A1.jpg
Wikipedia D-Link
WikiDevi.wi-cat.ru D-Link DIR-610N+ rev A1
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Status Unknown
Tomato any flavor Incompatible
Platform
BrandModelRev D-Link DIR-610N+ A1
FCC ID KA2IR610NA1
Type wireless router
CPU1 checkY Ralink RT5350
CPU1 Type MIPS 24KEc
CPU1 Speed 360 MHz
Flash1 Chip Macronix Model?
Flash1 Size ? MiB
RAM1 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip ESMT M12L2561616A-6T
ETH chip1 Ralink RT5350
Switch Ralink RT5350
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: F0:7D:68 (3 E, 5 W)
Ethernet OUI: F0:7D:68 (3 E, 5 W)

Expansion IF types none specified
Power 5 VDC, 0.55 A
Connector type barrel
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 818 additional devices
of which 226 are D-Link devices

Manuf/OEM/ODM Alpha Networks WRG-N62
Retail
FCC approval date 23 July 2013
Country of manuf China
Physical
Dimensions 54 mm x 158 mm x 113 mm
Weight 164 g
Radio 1
Chip1 Ralink RT5350
Wireless interface OUI F0:7D:68
Antenna Connector Type none specified
MIMO status 1x1:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented D-Link devices with specifications, see D-Link.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

"8WRGN64..0A1G" is silkscreened on the board in the FCC photos.

The Flash chip looks like it may be a MX25L6405DMI-12G (8 MB).

The FCC test report specifies this FCC ID covers both this model and the DIR-610N.

Datasheet on D-Link Latin America

Additional specifications, per the datasheet, follow...
  • Dimensions: 54 mm x 158 mm x 113 mm
  • Weight: 164 g

A F0:7D:68 OUI is shown on the FCC EUT's label. It is presumed to be used.

The power adapter shown in the FCC photos is a TENPAO S003IU0500055 (100-240VAC ~ 50/60 Hz, 150mA -> 5VDC, 550mA).