D-Link DIR-629 rev A1

From TechInfoDepot
Jump to navigationJump to search
bgn (N450)
N450 High Power Dual-Band WI-FI Router
Wikipedia D-Link
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev D-Link DIR-629rev A1
FCC ID none specified
Type wireless router
CPU1 checkY Qualcomm Atheros QCA9558
CPU1 Type MIPS 74Kc
CPU1 Speed 720 MHz
Flash1 Chip Brand? Model?
Flash1 Size 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR2 600)
RAM1 Chip Brand? Model?
ETH chip1 Qualcomm Atheros QCA9558
Switch Atheros AR8236
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: 70:62:B8 (5 E, 5 W)
Ethernet OUI: 70:62:B8 (5 E, 5 W)

Stock bootloader U-Boot
Expansion IF types none specified
Power 12 VDC, 1 A
Serial Port (UART) yes, 3.3V TTL, (115200 8N1)
JTAG Port yes
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Retail
Availability End of Life
End of Life date 2023
Radio 1
Chip1 Qualcomm Atheros QCA9558
Wireless interface OUI 70:62:B8
Antenna Connector Type none specified
MIMO status 3x3:3
Wireless Standard IEEE 802.11b/g/n
802.11n up to 450 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented D-Link devices with specifications, see D-Link.

• 450 Mbps - 3SS 2.4GHz 802.11n (40MHz chan.) = N450 class

Flashing

Flashing OpenWrt

Target: ath79
Subtarget: generic
Package architecture: mips_24kc
Supported Since Commit
Support started version: 23.05.0
Current supported version: 25.12.0
LAN Hardware: Atheros AR8236
WLAN Hardware: Qualcomm Atheros QCA9558
WLAN Comment: 802.11n 3×3
Installation method(s):
see git-commit
Recovery method(s):
see git-commit
git • >> 
ath79: add support for D-Link DIR-629 A1
Specifications:
  SOC:      QCA9588 CPU 720 MHz AHB 200 MHz
  Switch:   AR8236
  RAM:      64 MiB DDR2-600
  Flash:    8 MiB
  WLAN:     Wi-Fi4 2.4 GHz 3*3
  LAN:      LAN ports *4
  WAN:      WAN port *1
  Buttons:  reset *1 + wps *1
  LEDs: ethernet *5, power, wlan, wps

MAC Address:
  use      address               source
  label    70:62:b8:xx:xx:96     lan && wlan
  lan      70:62:b8:xx:xx:96     mfcdata@0x35
  wan      70:62:b8:xx:xx:97     mfcdata@0x6a
  wlan     70:62:b8:xx:xx:96     mfcdata@0x51

Install via Web UI:
  Apply factory image in the stock firmware's Web UI.

Install via Emergency Room Mode:
  DIR-629 A1 will enter recovery mode when the system fails to boot or
  press reset button for about 10 seconds.

  First, set IP address to 192.168.0.1 and server IP to 192.168.0.10.
  Then we can open http://192.168.0.1 in the web browser to upload
  OpenWrt factory image or stock firmware. Some modern browsers may
  need to turn on compatibility mode.

Signed-off-by: Shiji Yang
Retrieved from "https://techinfodepot.shoutwiki.com/w/index.php?title=D-Link_DIR-629_rev_A1&oldid=538442"