D-Link DIR-810L rev B1

multiple revisions of this device, use caution

abgn+ac (AC750)
Wireless AC750 Dual Band Cloud Router
Wikipedia	D-Link
WikiDevi.wi-cat.ru	D-Link DIR-810L rev B1
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	D-Link DIR-810L B1
FCC ID	KA2IR810LB1
IC ID	4216A-IR810LB1
Type	wireless router
CPU1	MediaTek MT7620A
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz 32-bit
Flash1 Chip	Macronix MX25L6406EM2I-12G
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	ESMT M14D5121632A-2.5B
ETH chip1	MediaTek MT7620A
Switch	MediaTek MT7620A
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 6C:19:8F (2 E, -) Ethernet OUI: 6C:19:8F (2 E, -)
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, 4-pad header, J1, (57600 8N1)
Other
Default SSID: dlink-XXXX (35 addl. devices) , dlink-XXXX-5GHz (5 addl. devices) Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 224 are D-Link devices Default login user: Admin Default login password: blank Admin:blank credentials used by 81 additional devices of which 76 are D-Link devices
Manuf/OEM/ODM	Cameo
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs)
Retail
Availability	End of Life
FCC approval date	05 March 2013
(Est.) release date	11 April 2013
UPC	790069390296 (UPC DB, On eBay)
ASIN	B00C9V0OBI ,  multiple uses
Country of manuf	China
Radio 1
Chip1	MediaTek MT7620A
Wireless interface OUI	6C:19:8F
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Chip1	MediaTek MT7610E
Wireless interface OUI	6C:19:8F
Antenna Connector Type	U.FL
MIMO status	1x1:1
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 433 Mbps
802.11n	up to 150 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand D-Link DIR-810L rev A1 MediaTek MediaTek MediaTek D-Link DIR-810L rev B1 MediaTek MediaTek MediaTek

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 433 Mbps - 1SS 5GHz 802.11ac (80MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC750 class

Links of Interest

• D-Link DIR-810L on OpenWrt wiki
• PCB rev B1 image

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: mt7620
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 23.05.5

Please insert instructions here

JTAG-Serial Info

Serial

Serial Pinouts

Header pins were not populated as they appear in the FCC photo.

Boot Log

boot log

U-Boot 1.1.3 (Jun 10 2014 - 18:41:01) Board: Ralink APSoC DRAM: 64 MB relocate_code Pointer at: 83f98000 enable ephy clock...done. rf reg 29 = 5 SSC disabled. spi_wait_nsec: 29 spi device id: c2 20 17 c2 20 (2017c220) find flash: MX25L6405D MAC: 6c:19:8f:ed:f0:f6 ============================== Ralink UBoot Version: 4.1.1.0 DIR-810L(1.00b03) ------------------------------ ASIC 7620_MP (Port5<->None) DRAM component: 512 Mbits DDR, width 16 DRAM bus: 16 bit Total memory: 64 MBytes Flash component: SPI Flash Date:Jun 10 2014 Time:18:41:01 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 580 MHZ #### estimate memory size =64 Mbytes 3: System Boot system code via Flash. ## Booting image at bc170000 ... Image Name: Linux Kernel Image Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 6047003 Bytes = 5.8 MB Load Address: 80000000 Entry Point: 8000c2d0 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 8000c2d0) ## Giving linux memsize in MB, 64 Starting kernel ... LINUX started... THIS IS ASIC init started: BusyBox v1.12.1 (2014-06-11 14:51:50 CST) starting pid 35, tty '': '/etc_ro/rcS' mount: mounting none on /proc/bus/usb failed: No such file or directory Welcome to _______ _______ ___ __ ____ _ _ ___ | ___ \| __ || | |__|| \ | || | / / | |___| || |__| || |__ __ | \| || |/ / | _ /| _ || || || |\ || \ |__| \__\|__| |__||______||__||_| \____||_|\___\ =System Architecture Department= mount mydlink ok mount flash ok old language pack not found language pack exists Starting loop GPIO LED=9,PBC=2 Waiting for Wireless Events from interfaces... [ leobox_ipc.c: 207 sem_create()]:::add semid = 0 [ leobox_ipc.c: 207 sem_create()]:::add semid = 32769 [ leobox_ipc.c: 207 sem_create()]:::add semid = 65538 [ leobox_ipc.c: 207 sem_create()]:::add semid = 98307 [ leobox_ipc.c: 207 sem_create()]:::add semid = 131076 [ leobox_ipc.c: 207 sem_create()]:::add semid = 163845 [ leobox_ipc.c: 207 sem_create()]:::add semid = 196614 [ leobox_ipc.c: 207 sem_create()]:::add semid = 229383 [ leobox_ipc.c: 207 sem_create()]:::add semid = 262152 [ leobox_ipc.c: 207 sem_create()]:::add semid = 294921 [ leobox_ipc.c: 207 sem_create()]:::add semid = 327690 [ leobox_ipc.c: 207 sem_create()]:::add semid = 360459 [ leobox_ipc.c: 207 sem_create()]:::add semid = 393228 [ leobox_ipc.c: 207 sem_create()]:::add semid = 425997 [ leobox_ipc.c: 207 sem_create()]:::add semid = 458766 [ leobox_ipc.c: 207 sem_create()]:::add semid = 491535 [ leobox_ipc.c: 207 sem_create()]:::add semid = 524304 [ leobox_ipc.c: 207 sem_create()]:::add semid = 557073 [ leobox_ipc.c: 207 sem_create()]:::add semid = 589842 [ leobox_ipc.c: 207 sem_create()]:::add semid = 622611 [ leobox_ipc.c: 207 sem_create()]:::add semid = 655380 [ 122 ncc_main.c : 177 main()] :::[122]Thread Create[main thread] [ 122 ncc_runtimecfg.c : 538 initRunTimeCfg()] :::Init Run-Time Config Success. [ 122 ncc_runtimecfg.c : 539 initRunTimeCfg()] :::Total 4470 nodes, each node 24 bytes. [ 122 ncc_runtimecfg.c : 540 initRunTimeCfg()] :::Total 107280 byte for all nodes. [ 122 ncc_runtimecfg.c : 541 initRunTimeCfg()] :::Total 68493 byte for data. [ 122 ncc_runtimecfg.c : 207 loadCfg()] :::Start loadCfg [ 122 ncc_lz77.c : 534 flash2rootfs()] :::Load Success(/var/tmp/cfg.txt) [ 122 ncc_runtimecfg.c : 990 setObjToDefault()] :::set IGD_FirmwareStatus_[1,1,0,0,0] to default /etc_ro/rcS: line 163: mp.sh: not found starting pid 140, tty '/dev/ttyS1': '/bin/sh' # [ 122 ncc_inf.c : 1132 ncc_inf_main()] :::JTraceLevel=4 [ 122 leobox_network.c : 1083 socket_select()] :::Enter pid=122,ppid=1 [leobox_network.c: 1093 socket_select()] :::main process get thread id=1026 [ 142 leobox_network.c : 835 socket_select_hdlr()] :::[142]Thread Create[socket_select_hdlr] [ 143 ncc_inf.c : 959 processInf()] :::[143]Thread Create[processInf] ================nice=-20 bind: Address already in use [ 122 ncc_main.c : 269 main()] :::Stop Web Access HTTP [ 122 ncc_httpd.c : 539 httpdOp()] :::st is null. [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 5095 probeHTTPsEnable()]:::probeHTTPsEnable(); [ 122 ncc_main.c : 291 main()] :::Start HTTPS mini_httpd: started as root without requesting chroot(), warning only sh: cannot create /sys/class/net/br0/bridge/tcp_allow: nonexistent directory bind: Address already in use [ 122 ncc_main.c : 305 main()] :::Stop Web Access HTTPS [ 122 ncc_httpd.c : 539 httpdOp()] :::st is null. mini_httpd: started as root without requesting chroot(), warning only [ 157 leobox_timer.c : 235 timerThread()] :::[157]Thread Create[timerThread] [ 157 leobox_timer.c : 243 timerThread()] :::Timer Thread Running [ 158 ncc_main.c : 41 sendBootEvent()] :::[158]Thread Create[sendBootEvent] sh: cannot create /proc/sys/net/ipv4/conf/eth2.2/arp_ignore: nonexistent directory [ 122 ncc_fsm_boot.c : 513 Boot()]:::=====================Start DIR_810_Boot===================== [ 122 ncc_fsm_boot.c : 570 Boot()]:::MAC 0 = 6C198FEDF0F6 [ 122 ncc_fsm_boot.c : 571 Boot()]:::MAC 1 = 6C198FEDF0F7 switch reg write offset=3100, value=56330 switch reg write offset=3200, value=56330 switch reg write offset=3300, value=56330 switch reg write offset=3400, value=56330 switch reg write offset=3000, value=56330 Set: phy[4].reg[4] = 05e1 Set: phy[4].reg[0] = 3300 [ 122 ncc_l2_independence.c: 171 swSpeedSet()]:::port = 4, speed = 0 killall: crond: no process killed [ 122 ncc_crond.c : 54 crondConf()]:::DEBUG ON REG_ESW_WT_MAC_ATC is 0x7ff0002 done. [ 122 ncc_firewall.c : 1572 reBuildMAC6()]:::reBuildMAC6()+ REG_ESW_WT_MAC_ATC is 0x7ff0002 done. [ 122 ncc_firewall.c : 1621 reBuildMAC6()]:::reBuildMAC6()- ip6tables: No chain/target/match by that name. [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8098 probeFirewall6_SimpSec()]:::>>probeFirewall6_SimpSec [ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()] :::get iface eth2.2 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8175 probeFirewall6_SimpSec()]:::<<probeFirewall6_SimpSec readInfo(InfoV6AutoDetectWanType):0 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8215 probeFirewall6_SimpSec()]:::<<probeFirewall6_SimpSec [ 122 ncc_firewall.c : 2236 reBuildFirewall6CPE()]::: [Bernie debug]:tmpPreiapd = [ 122 ncc_firewall.c : 2237 reBuildFirewall6CPE()]::: [Bernie debug]: prepare set cpe-dynamic rule [ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()] :::get iface eth2.2 killall: wakeOnLanProxy: no process killed [ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start=== [ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end=== [SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()] :::[nfOpFunc]Finish nf_init, 0 [ 122 ncc_fsm_boot.c : 780 Boot()]:::cfg->tzone=-128 Sat Jan 1 00:00:00 GMT 2011 [ 122 ncc_fsm_boot.c : 806 Boot()]:::Merge language pack!! [ 4370 lang_merge.c : 1153 main()]:::before print info [ 4370 lang_merge.c : 1156 main()]:::Parameters: ori_lang_fp: /var/tmp/lang.js def_lang_fp: /www/def_lang.js [ 4370 lang_merge.c : 1234 main()]:::save to old js file!! [ 4370 lang_merge.c : 1235 main()]:::save to old js file!! [ 4370 lang_merge.c : 1236 main()]:::save to old js file!! sh: cannot create /proc/sys/net/ipv6/conf/ra1/disable_ipv6: nonexistent directory sh: cannot create /proc/sys/net/ipv6/conf/rai1/disable_ipv6: nonexistent directory [ 122 ncc_status.c : 1211 delIfaceInfo()]:::delIfaceInfo()+:iface:br0 [ 122 ncc_routerlan.c : 37 attachWanDomainName()]:::Get wan interface fail!! [ 122 ncc_routerlan.c : 37 attachWanDomainName()]:::Get wan interface fail!! [ 122 ncc_help.c : 1599 checkDefCfg()]:::defCfg=1 llmnr: have no available linklocal address. wait count=0 [ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start=== [ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end=== [SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()]:::[nfOpFunc]Finish nf_redirect_to_index_on, 47 [ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start=== llmnr: have no available linklocal address. wait count=1 [ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end=== [SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()]:::[nfOpFunc]Finish nf_lan_up, 3 [ 122 ncc_help.c : 1599 checkDefCfg()]:::defCfg=1 [ 122 ncc_mdns.c : 173 mdnsConf()]:::hnf=0 llmnr: have no available linklocal address. wait count=2 invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0 invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1 Jan 1 00:00:06 miniupnpd[6375]: could not open lease file: /tmp/upnp_rdr_list Jan 1 00:00:06 miniupnpd[6375]: HTTP listening on port 65530 No IPv6 address found for interface br0. Jan 1 00:00:06 miniupnpd[6375]: no HTTP IPv6 address Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m Jan 1 00:00:06 miniupnpd[6375]: [truncated] m mDNSResponderPosix: Starting in daemon mode killall: lld2d: no process killed ***** g_wl_interface = ra0 ****** killall: proxy: no process killed [ leobox_ipc.c: 207 sem_create()]:::add semid = 688149 [ 6392 lanmapd.c : 2648 main()] :::=======Lanmapd===== [ 6392 lanmapd.c : 2649 main()]:::iface br0 [ 6392 lanmapd.c : 2650 main()]:::ip 192.168.0.1 [ 6392 lanmapd.c : 2652 main()]:::ipAlias 192.168.0.1 [ 6392 lanmapd.c : 2654 main()]:::netmask 255.255.255.0 [ 6392 lanmapd.c : 2655 main()]:::network id 192.168.0.0 [ 6392 lanmapd.c : 2656 main()]:::mac 6c:19:8f:ed:f0:f6 [ 6392 lanmapd.c : 2657 main()]:::hostname dlinkrouter [ 6392 lanmapd.c : 2658 main()]:::hostname encode EEEMEJEOELFCEPFFFEEFFCCACACACAAA [ 6392 lanmapd.c : 2660 main()]:::aliasname shareport [ 6392 lanmapd.c : 2661 main()]:::aliasname encode FDEIEBFCEFFAEPFCFECACACACACACAAA [ 6392 lanmapd.c : 2663 main()]:::======================== llmnr: have no available linklocal address. wait count=3 killall: crond: no process killed killall: wscd: no process killed Starting loop GPIO LED=9,PBC=2 [ 122 ncc_fsm_boot.c : 307 doRtInit()] :::Send Event to open 2.4G Wlan ! [ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched llmnr: have no available linklocal address. wait count=4 llmnr: have no available linklocal address. wait count=5 llmnr: have no available linklocal address. wait count=6 llmnr: have no available linklocal address. wait count=7 llmnr: have no available linklocal address. wait count=8 llmnr: have no available linklocal address. wait count=9 [ 122 ncc_fsm_boot.c : 312 doRtInit()] :::Send Event to open 5G Wlan ! [ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched llmnr: have no available linklocal address. wait count=10 llmnr: have no available linklocal address. wait count=11 llmnr: have no available linklocal address. wait count=12 Starting loop GPIO LED=9,PBC=2 llmnr: have no available linklocal address. wait count=13 killall: wscd: no process killed route: ioctl 0x890b failed: File exists libupnp: using UDP SSDP_PORT = 1900 brctl: bridge br0: Device or resource busy brctl: bridge br0: Device or resource busy [ 122 ncc_fsm_boot.c : 923 Boot()]:::wanCableLink = 0 [ 122 ncc_help.c : 1599 checkDefCfg()]:::defCfg=1 [ 122 ncc_mdns.c : 173 mdnsConf()]:::hnf=0 mDNSResponderPosix: Starting in daemon mode [ 122 ncc_dev_independence.c: 3892 devOpFunc()]:::get internet_cable_lose [ 122 ncc_firewall.c : 4978 runFwScript()]:::===ipt run start=== [ 122 ncc_firewall.c : 4980 runFwScript()]:::===ipt run end=== [SYS][ 122 ncc_firewall.c : 5572 nfOpFunc()] :::[nfOpFunc]Finish nf_80_to_404_on, 38 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8069 probeULA()]:::probeULA [ 122 ncc_help.c : 2307 copy_mac_to_eui64()]:::v6id:6e19:8fff:feed:f0f6, [ 122 ncc_help.c : 2191 read_ipv6addr()] ::: family : 10, prefixlen : 64, flags : 192, scope : 253, index : 9 [ 122 ncc_help.c : 2209 read_ipv6addr()] ::: + fe80::6e19:8fff:feed:f0f6 [ 122 ncc_help.c : 2953 generate_default_ULA()] :::[IPv6 Debug]Get IPv6 Link-local Address :br0 :fe80::6e19:8fff:feed:f0f6!! [ 122 ncc_help.c : 2996 generate_default_ULA()] :::Default ULA prefix => fd68:09d9:84e2:: [ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0 [ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8098 probeFirewall6_SimpSec()]:::>>probeFirewall6_SimpSec [ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()] :::get iface eth2.2 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8175 probeFirewall6_SimpSec()] :::<<probeFirewall6_SimpSec readInfo(InfoV6AutoDetectWanType):0 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 8215 probeFirewall6_SimpSec()] :::<<probeFirewall6_SimpSec ip6tables: Bad rule (does a matching rule exist in that chain?). [ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()] :::get iface eth2.2 [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 6528 probeIPv6Radvd()] :::cfg->isdomainstatic = FALSE [ 122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/.. /model/dlink_810_B/objTools/ncc_objTools.c: 6934 probeIPv6Radvd()]:::MTU: 1500 [ 122 ncc_help.c : 2191 read_ipv6addr()] ::: family : 10, prefixlen : 64, flags : 192, scope : 253, index : 9 [ 122 ncc_help.c : 2209 read_ipv6addr()] ::: + fe80::6e19:8fff:feed:f0f6 [ 122 ncc_help.c : 2953 generate_default_ULA()] :::[IPv6 Debug]Get IPv6 Link-local Address :br0 :fe80::6e19:8fff:feed:f0f6!! [ 122 ncc_help.c : 2996 generate_default_ULA()] :::Default ULA prefix => fd68:09d9:84e2:: [ 122 ncc_fsm_boot.c : 1114 Boot()]::: llmnr: have no available linklocal address. wait count=14 llmnr: have no available linklocal address. wait count=15 [ 122 ncc_help.c : 1952 is_v6defaultgw_exist()] :::[IPv6 WARNING] Default GW not Exist. [ 122 ncc_radvd.c : 114 radvdConf()] :::MTU: 1500 [ 122 ncc_radvd.c : 143 radvdConf()] :::IPV6 WARNING: LAN RADVD default lifetime is 0 due to NULL prefix. [ 122 ncc_radvd.c : 233 radvdConf()] :::is6rdsunset: 0, prefix: [ 122 ncc_radvd.c : 70 radvdStart()]:::radvdStart -1 [ 122 ncc_dev_v6_independence.c: 3217 devV6OpFunc()]:::pd_hint set IPv6 [ 122 ncc_dev_v6_independence.c: 3288 devV6OpFunc()] :::0:0:0:0:0:0:0:0, 56, 0, 0 [ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0 [ 122 ncc_status.c : 1273 delIfaceInfo6()]:::delIfaceInfo6()+:match iface:br0 [ 122 ncc_status.c : 1248 delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0 [ 122 ncc_objAction.c : 2609 reflash_IGD_Status_IPv6Status_()] :::get iface eth2.2 [ 122 ncc_fsm_boot.c : 1299 Boot()] :::setting v6Lan Host Filter=fe80:0:0:0:6e19:8fff:feed:f0f7! [ 122 ncc_fsm_boot.c : 1321 Boot()] :::===finish DIR_810_Boot=== [SYS][ 122 ncc_fsm_boot.c : 1336 Boot()]:::Boot Complate!! [ 122 ncc_EventInternal.c : 1189 doEventInternal()]:::InternalLocalTimeChange [ 122 ncc_EventInternal.c : 501 onMailSchedule()] :::mailCfg.schedSendEnable ? 0 [ 122 ncc_EventInternal.c : 1208 doEventInternal()]:::needSendLog = 0 [ 122 ncc_rt5592_wlan.c : 3083 rt5592_wlan_Stop()]:::kill wscd 2.4g [ 122 ncc_objAction.c : 2084 ResetWirelessCounter()]:::DEBUG ON [ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched cat: can't open '/var/run/wscd.pid.rai0': No such file or directory kill: you need to specify whom to kill rm: cannot remove '/var/run/wscd.pid.rai0': No such file or directory libupnp: using UDP SSDP_PORT = 1900 brctl: bridge br0: Device or resource busy brctl: bridge br0: Device or resource busy Starting loop GPIO LED=9,PBC=2 route: ioctl 0x890b failed: File exists invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0 invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1 libupnp: using UDP SSDP_PORT = 1900 [ 122 ncc_rt5592_wlan.c : 3099 rt5592_wlan_Stop()]:::kill wscd 5g [ 122 ncc_objAction.c : 2098 ResetWirelessCounter()]:::DEBUG ON [ 122 ncc_EventInternal.c : 253 wlanSchedCheck()]:::no sched Starting loop GPIO LED=9,PBC=2 route: ioctl 0x890b failed: File exists invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0 invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1

Pictures

User Images

• 

  DIR-810L B1 UART