D-Link DIR-815 rev A1

multiple revisions of this device, use caution

abgn (AN600)
Wireless N Dual Band Router
Support	Support page
Wikipedia	D-Link
WikiDevi.wi-cat.ru	D-Link DIR-815 rev A1
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	D-Link DIR-815 A1
FCC ID	KA2IR815A1
IC ID	4216A-IR815A1
Type	wireless router
Series	DIR-815
CPU1	Ralink RT3662
CPU1 Type	MIPS 74Kc
CPU1 Speed	500 MHz
Flash1 Chip	Macronix MX29LV320DBTI-70G
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	ESMT M12L2561616A-6T
ETH chip1	Ralink RT3662
Switch	IC+ IP175D
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 14:D6:4D (9 E, 9 W), 1C:7E:E5 (5 E, 6 W), 34:08:04 (8 E, 10 W), 5C:D9:98 (4 E, 6 W) Ethernet OUI: 14:D6:4D (9 E, 9 W), 1C:7E:E5 (5 E, 6 W), 34:08:04 (8 E, 10 W), 5C:D9:98 (4 E, 6 W)
Stock bootloader	U-Boot 3.3 Ralink
Stock FW OS	Linux 2.6.33.2
Expansion IF types	none specified
Power	5 VDC, 2.5 A
Connector type	barrel 5 mm (OD) 2 mm (ID) 10 mm (LEN)
Flags: boot log
Other
Default SSID: dlink (37 addl. devices) , dlink_media (4 addl. devices) Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 224 are D-Link devices Default login user: admin Default login password: blank admin:blank credentials used by 365 additional devices of which 193 are D-Link devices
Manuf/OEM/ODM	Alpha Networks WRG-ND08
Retail
FCC approval date	06 July 2010
UPC	790069336119 (UPC DB, On eBay)
ASIN	B0042X3F76
Country of manuf	China
Radio 1
Chip1	Ralink RT3662
Wireless interface OUI	14:D6:4D, 1C:7E:E5, 34:08:04, 5C:D9:98
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Ralink RT3092
Wireless interface OUI	14:D6:4D, 1C:7E:E5, 34:08:04, 5C:D9:98
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand D-Link DIR-815 rev A1 Ralink Ralink Ralink D-Link DIR-815 rev B1 Ralink Ralink Ralink D-Link DIR-815 rev C1 Realtek Realtek Realtek D-Link DIR-815 rev D1 Realtek Realtek Realtek

For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

Simultaneous Dual-Band
10/100 Ethernet

"8WRGND08.1A1G" is silkscreened on the board.

The default SSIDs for the router are dlink (2.4 GHz) and dlink_media (5 GHz).

Note: Telnet is enabled by default on (at least) FW v1.00. Credentials are Alphanetworks:wrgnd08_dlob_dir815.

The power adapter included with the router is a Global Yeou Diann Electric Industrial AMS3-0502500SU. ID/OD/Len measurements are approximate.

JTAG-Serial Info

Serial

Serial Pinouts

TX and RX pins are clearly marked on the board @ JP1. GND is right above the TX pin.

Serial info

Derived info from FW v1.00 (built @ 2010-08-06) boot log U-Boot 1.1.3 (Jul 16 2010 - 11:25:10) (ALPHA) SVN revision: 359 Target board: WRG-ND08 Board: Ralink APSoC DRAM: 32 MB Flash: Bank 0, ID:000322a8, Size 4194304 (0x00400000) ============================================ Ralink UBoot Version: 3.3 -------------------------------------------- ASIC 3883_MP (MAC to MAC 100F MII Mode) DRAM component: 256 Mbits SDR DRAM bus: 16 bit Total memory: 32 MBytes Flash component: NOR Flash Date:Jul 16 2010 Time:11:25:10 ============================================ icache: sets:512, ways:4, linesz:32 ,total:65536 dcache: sets:256, ways:4, linesz:32 ,total:32768 GPIO pin 24 reset to switch Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash. ## Booting image at bc050000 ... We have SEAMA, Image Size = 3780640 Verifying Checksum ... Uncompressing SEAMA linux.lzma ... OK ## Transferring control to Linux (at address bc05000c) ... ## Giving linux memsize in MB, 32 Starting kernel ... LINUX started... THIS IS ASIC Linux version 2.6.33.2 (joely@enzo) (gcc version 4.3.3 (GCC) ) #1 Tue Aug 3 21:2 2:10 CST 2010 The CPU speed set to 500 MHz bootconsole [early0] enabled CPU revision is: 0001974c (MIPS 74Kc) Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00002000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00002000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock1 noinitrd PID hash table entries: 128 (order: -3, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Writing ErrCtl register=00000ef0 Readback ErrCtl register=00000ef0 Memory: 28944k/32768k available (2638k kernel code, 3824k reserved, 622k data, 1 56k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:128 setup_irq 6 CPU frequency 500.00 MHz [debug] (r4k_clockevent_init line: 172) [debug] 128 ee6b280 (r4k_clockevent_init line: 176) [debug] (r4k_clockevent_init line: 185) [debug] irq: 5 , 800091ec , (r4k_clockevent_init line: 195) 4,[debug] (r4k_clockevent_init line: 217) 5,[debug] (r4k_clockevent_init line: 222) setup_irq 5 [debug] (r4k_clockevent_init line: 228) If the above line no "setup_irq 5", mean irq for timer is not installed Calibrating delay loop... 249.34 BogoMIPS (lpj=498688) Mount-cache hash table entries: 512 NET: Registered protocol family 16 registering PCI controller with io_map_base unset bio: create slab <bio-0> at 0 pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] pci 0000:00:00.0: BAR 1: assigned [mem 0x20100000-0x2010ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x20100000-0x2010ffff] (PCI address [0x20100000-0x2010ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff] pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x2000ffff] (PCI address [0x20000000-0x2000ffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] pci 0000:00:00.0: bridge window [mem pref disabled] bus=1, slot = 0x0 cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Load RT2880 Timer Module(Wdg/Soft) squashfs: version 4.0 (2009/01/31) Phillip Lougher alg: No test for lzma (lzma-generic) alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:00.0: device [1814:0802] has invalid IRQ; check vendor BIOS Ralink gpio driver initialized rt3883_access_init: rt3883 access driver initialization. HDLC line discipline maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A console [ttyS1] enabled, bootconsole disabled12) is a 16550A console [ttyS1] enabled, bootconsole disabled elbox physmap platform flash device: 00400000 at 1c000000 elbox-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 elbox-flash.0: the flash image has SEAMA header elbox-flash.0: squashfs filesystem found at offset 1507392 Creating 8 MTD partitions on "elbox-flash.0": 0x000000170060-0x0000003eb060 : "rootfs" 0x000000050000-0x0000003f0000 : "upgrade" 0x000000040000-0x000000050000 : "devconf" 0x000000030000-0x000000040000 : "devdata" 0x0000003f0000-0x000000400000 : "langpack" 0x000000000000-0x000000400000 : "flash" 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000038000 : "boot env" Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors allocated, mtu = 1500! eth2: set mac address GMAC2 100 phy PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 skb rate limit initialization. GACT probability NOT on u32 classifier Actions configured nf_conntrack version 0.5.0 (452 buckets, 1808 max) xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 VFS: Mounted root (squashfs filesystem) readonly on device 31:1. Freeing unused kernel memory: 156k freed init started: BusyBox v1.14.1 (2010-08-03 21:22:18 CST) starting pid 29, tty '': '/etc/init.d/rcS' Algorithmics/MIPS FPU Emulator v1.5 [/etc/init.d/S10init.sh] mount: mounting usbfs on /proc/bus/usb failed: No such file or directory [/etc/init.d/S15udevd.sh] error initializing netlink socket [/etc/init.d/S16ipv6.sh] [/etc/init.d/S19devfs.sh] [/etc/init.d/S19init.sh] [/etc/init.d/S20init.sh] DEVCONF: no config data available (ret=-1) ! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! Uable to read device config. !! !! Setting is reset to factory default. !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DEFNODE[/etc/defnodes/S10phyinf.php] DEFNODE[/etc/defnodes/S11devdata.xml] DEFNODE[/etc/defnodes/S12flashspeed.php] DEFNODE[/etc/defnodes/S14setchlist.php] DEFNODE[/etc/defnodes/S20device.xml] DEFNODE[/etc/defnodes/S22timezone.php] [/etc/scripts/setdate.sh] 01/01/2000 ... Sat Jan 1 08:00:07 GMT 2000 DEFNODE[/etc/defnodes/S30device.php] DEFNODE[/etc/defnodes/S30device.xml] DEFNODE[/etc/defnodes/S31diagnostic.xml] DEFNODE[/etc/defnodes/S31locale.php] DEFNODE[/etc/defnodes/S32layout.php] DEFNODE[/etc/defnodes/S33wifi.php] DEFNODE[/etc/defnodes/S40device.xml] DEFNODE[/etc/defnodes/S90sessions.php] DEFNODE[/etc/defnodes/S90upnpigd.php] DEFNODE[/etc/defnodes/S90upnpwfa.php] SERVD: start service [LOGD] [/etc/init.d/S20interfaces.sh] eth2: set mac address eth3: set mac2 address GDMA2_MAC_ADRH -- : 0x0000000c GDMA2_MAC_ADRL -- : 0x4328822a eth3: ===> VirtualIF_open vconfig: can't open '/proc/net/vlan/config': No such file or directory [/etc/init.d/S23udevd.sh] [/etc/init.d/S45gpiod.sh] Factory reset time : 5 secs [/etc/init.d/S45rtstad.sh] rtstad: not found [/etc/init.d/rcS] done! [/etc/init0.d/S21layout.sh]: start ... SERVD: start service [LAYOUT] [/etc/init0.d/S40event.sh]: start ... eth2: set mac address RTNETLINK answers: Device or resource busy eth3: set mac2 address GDMA2_MAC_ADRH -- : 0x00005cd9 GDMA2_MAC_ADRL -- : 0x98e492f1 eth3: ===> VirtualIF_open SERVD: event [SEALPAC.LOAD/default] device eth2 entered promiscuous mode br0: port 1(eth2) entering forwarding state Unable to open socket file : /var/gpio_ctrl SERVD: start service [LOGD] SERVD: service [LOGD] is already started. SERVD: start service [PHYINF.ETH-1] [/etc/init0.d/S40gpioevent.sh]: start ... SERVD: start service [PHYINF.ETH-2] SEAMA: '/dev/mtdblock/5' is not a seama file ! [/etc/init0.d/S41autowan.sh]: start ... [/etc/init0.d/S41inf.sh]: start ... [/etc/init0.d/S42pthrough.sh]: start ... [/etc/init0.d/S51wlan.sh]: start ... [/etc/init0.d/S52wlan.sh]: start ... 00: WPSLED Blue LED using GPIO #0, output mode. 01: INET Green LED using GPIO #28, output mode. 02: INET Amber LED using GPIO #27, output mode. 03: STATUS Green LED using GPIO #29, output mode. 04: STATUS Amber LED using GPIO #30, output mode. 05: WPS button using GPIO #26, input mode. 06: FRESET button using GPIO #25, input mode. SERVD: event [WANPORT.LINKDOWN] not found! SERVD: start service [BRIDGE] rt2860v2_ap: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint === pAd = c02ef000, size = 438592 === <-- RTMPAllocAdapterBlock, Status=0 init_blockch_proc proc entry for blocked dfs channel is created BRIDGE: The device is not in the bridge mode. SERVD: start service [LAN] SERVD: start service [WAN] SERVD: start service [DEVICE.PASSTHROUGH] SERVD: start service [WIFI.PHYINF] RX DESC a1972000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 1. Phy Mode = 8 2. Phy Mode = 8 3. Phy Mode = 8 RtmpOSFileOpen(): Error 2 opening /var/dfs_blocked.txt Can't read dfs file from kernel RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 00 SYNC - BBP R4 to 20MHz.l SERVD: start service [IPTABLES] Network interface reset count v1.0 Main bssid = 5c:d9:98:e4:92:f0 <==== rt28xx_init, Status=0 0x1300 = 00064380 ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize! RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0! delete_blockch_proc [/etc/init0.d/S65ddnsd.sh]: start ... [/etc/init0.d/S80telnetd.sh]: start ... [/etc/init0.d/rcS] done! Please press Enter to activate this console. SERVD: start service [IP6TABLES] SERVD: start service [IPTABLES] SERVD: service [IPTABLES] is already started. SERVD: start service [IP6TABLES] SERVD: service [IP6TABLES] is already started. SERVD: start service [INET.LAN-1] [/var/servd/INET.LAN-1_start.sh]: starting LAN-1... SERVD: event [LAN-1.UP/default] [/var/servd/INET.LAN-1_start.sh]: starting LAN-1 done !!! SERVD: start service [INET.LAN-2] ifsetup: (LAN-2) not active. SERVD: service [INET.LAN-2] return error 8. SERVD: start service [INET.LAN-3] [/var/servd/INET.LAN-3_start.sh]: starting LAN-3... SERVD: event [LAN-3.UP/default] [/var/servd/INET.LAN-3_start.sh]: starting LAN-3 done !!! SERVD: start service [INET.LAN-4] [/var/servd/INET.LAN-4_start.sh]: starting LAN-4... [/var/servd/INET.LAN-4_start.sh]: starting LAN-4 done !!! SERVD: start service [IPTMACCTRL] SERVD: start service [IPTURLCTRL] SERVD: start service [IPTPORTT] SERVD: start service [IP6T.LAN-1] SERVD: start service [IP6T.LAN-2] SERVD: start service [IP6T.LAN-3] SERVD: start service [IP6T.LAN-4] SERVD: start service [IPTABLES] SERVD: service [IPTABLES] is already started. SERVD: start service [IP6TABLES] SERVD: service [IP6TABLES] is already started. SERVD: start service [INET.WAN-1] [/var/servd/INET.WAN-1_start.sh]: starting WAN-1... [/var/servd/INET.WAN-1_start.sh]: starting WAN-1 done !!! SERVD: start service [INET.WAN-2] ifsetup: (WAN-2) not active. SERVD: service [INET.WAN-2] return error 8. SERVD: start service [INET.WAN-3] [/var/servd/INET.WAN-3_start.sh]: starting WAN-3... SERVD: event [WAN-3.UP/default] [/var/servd/INET.WAN-3_start.sh]: starting WAN-3 done !!! SERVD: start service [INET.WAN-4] [/var/servd/INET.WAN-4_start.sh]: starting WAN-4... [/var/servd/INET.WAN-4_start.sh]: starting WAN-4 done !!! SERVD: start service [IPTMASQ] /proc/sys/net/ipv4/ip_personality_sport: can't create /proc/sys/net/ipv4/ip_personality_enable: can't create SERVD: start service [IPTVSVR] SERVD: start service [IPTPFWD] SERVD: start service [IPTPORTT] SERVD: service [IPTPORTT] is already started. SERVD: start service [IPTDMZ] IPTDMZ: cnt= 1 SERVD: start service [IPT.WAN-1] SERVD: start service [IP6T.WAN-1] SERVD: start service [IPT.WAN-2] SERVD: start service [IP6T.WAN-2] SERVD: start service [IPT.WAN-3] SERVD: start service [IP6T.WAN-3] SERVD: start service [IPT.WAN-4] SERVD: start service [IP6T.WAN-4] SERVD: stop service [IPT.LAN-1] SERVD: service [IPT.LAN-1] is already stopped. SERVD: start service [IPT.LAN-1] /proc/fastnat/forskipsupport: can't create SERVD: stop service [IPT.LAN-2] SERVD: service [IPT.LAN-2] is already stopped. SERVD: start service [IPT.LAN-2] /proc/fastnat/forskipsupport: can't create SERVD: stop service [IPT.LAN-3] SERVD: service [IPT.LAN-3] is already stopped. SERVD: start service [IPT.LAN-3] SERVD: service [IPT.LAN-3] return error 108. SERVD: stop service [IPT.LAN-4] SERVD: service [IPT.LAN-4] is already stopped. SERVD: start service [IPT.LAN-4] SERVD: service [IPT.LAN-4] return error 108. SERVD: start service [PHYINF.WLAN-1] === pAd = c1172000, size = 328376 === <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc1160000, csr_addr=0xc1160000! SERVD: event [WPS.NONE/default] SERVD: start service [PHYINF.WLAN-2] === pAd = c1429000, size = 438592 === <-- RTMPAllocAdapterBlock, Status=0 init_blockch_proc proc entry for blocked dfs channel is created SERVD: event [WPS.NONE/default] SERVD: stop service [INFSVCS.LAN-1] SERVD: service [INFSVCS.LAN-1] is already stopped. SERVD: start service [INFSVCS.LAN-1] SERVD: event [LAN-1.CONNECTED] not found! SERVD: event [INFSVCS.LAN-1.UP/default] SERVD: event [STATUS.READY/default] SERVD: stop service [INFSVCS.LAN-3] SERVD: service [INFSVCS.LAN-3] is already stopped. SERVD: start service [INFSVCS.LAN-3] SERVD: event [LAN-3.CONNECTED] not found! SERVD: event [INFSVCS.LAN-3.UP] not found! SERVD: stop service [INFSVCS.WAN-3] SERVD: service [INFSVCS.WAN-3] is already stopped. SERVD: start service [INFSVCS.WAN-3] SERVD: event [WAN-3.CONNECTED] not found! SERVD: event [UPDATERESOLV/default] SERVD: event [INFSVCS.WAN-3.UP] not found! SERVD: event [UPNP.IGD.NOTIFY.WANIPCONN1] not found! SERVD: stop service [HOSTAPD] SERVD: service [HOSTAPD] is already stopped. SERVD: start service [HOSTAPD] Reading topology file /var/topology.conf ... ralink_init: Initiating ralink_wireless_eveRX DESC a0ca6000 size = 2048 nt_init... <-- RTMPAllocTxRxRingMemory, Status=0 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 00 SYNC - BBP R4 to 20MHz.l Main bssid = 5c:d9:98:e4:92:f0 <==== rt28xx_init, Status=0 0x1300 = 00064380 device rai0 entered promiscuous mode br0: port 2(rai0) entering forwarding state device ra0 entered promiscuous mode device ra0 left promiscuous mode ralink_initRX DESC a0b1c000 size = 2048 : Initiating ralink_wireless_event_init... <-- RTMPAllocTxRxRingMemory, Status=0 br_add_interface: Invalid argument 1. Phy Mode = 8 2. Phy Mode = 8 3. Phy Mode = 8 RTMPSetPhyMode: channel is out of range, use first channel=0 MCS Set = ff ff 00 00 00 SYNC - BBP R4 to 20MHz.l Main bssid = 5c:d9:98:e4:92:f0 <==== rt28xx_init, Status=0 0x1300 = 00064380 br0: port 2(rai0) multicast bandwidth 900kbps Using interface rai0 with hwaddr 5c:d9:98:e4:92:f0 and ssid 'dlink' Using interface ra0 with hwaddr 5c:d9:98:e4:92:f0 and ssid 'dlink_media' can't find port ra0 in bridge br0 SERVD: start service [ENLAN] [/var/servd/ENLAN_start.sh]: TODO ................... [/var/servd/ENLAN_start.sh]: TODO ................... SERVD: start service [HTTP.LAN-1] SERVD: start service [UPNP.LAN-1] SERVD: event [UPNP.ALIVE.LAN-1/default] SERVD: start service [NEAP.LAN-1] SERVD: start service [NAMERESOLV.LAN-1] SERVD: start service [DHCPS4.LAN-1] SERVD: start service [DNS4.LAN-1] SERVD: stop service [LLD2] SERVD: service [LLD2] is already stopped. SERVD: start service [LLD2] SERVD: start service [ENLAN] SERVD: service [ENLAN] is already started. SERVD: start service [NAMERESOLV.LAN-3] SERVD: stop service [IPTDEFCHAIN] SERVD: service [IPTDEFCHAIN] is already stopped. SERVD: start service [IPTDEFCHAIN] SERVD: stop service [IP6TDEFCHAIN] SERVD: service [IP6TDEFCHAIN] is already stopped. SERVD: start service [IP6TDEFCHAIN] SERVD: stop service [ROUTE.STATIC] SERVD: service [ROUTE.STATIC] is already stopped. SERVD: start service [ROUTE.STATIC] SERVD: stop service [ROUTE.DESTNET] SERVD: service [ROUTE.DESTNET] is already stopped. SERVD: start service [ROUTE.DESTNET] SERVD: stop service [ROUTE.DOMAIN] SERVD: service [ROUTE.DOMAIN] is already stopped. SERVD: start service [ROUTE.DOMAIN] SERVD: stop service [ROUTE.IPUNNUMBERED] SERVD: service [ROUTE.IPUNNUMBERED] is already stopped. SERVD: start service [ROUTE.IPUNNUMBERED] SERVD: stop service [MULTICAST] SERVD: service [MULTICAST] is already stopped. SERVD: start service [MULTICAST] SERVD: stop service [QOS] SERVD: service [QOS] is already stopped. SERVD: start service [QOS] echo QOS is disabled. Interface is wanif=eth3 lanif=br0 ... OK Start QOS system ... QOS= UPSTREAM=102400 DOWNSTREAM=102400 SERVD: start service [DEVICE.TIME] NTP is disabled ... SERVD: stop service [HTTP] SERVD: service [HTTP] is already stopped. SERVD: start service [HTTP] SERVD: event [HTTP.UP] not found! SERVD: stop service [DNS] SERVD: service [DNS] is already stopped. SERVD: start service [DNS] killall: dnsmasq: no process killed cat /proc/version # cat /proc/version Linux version 2.6.33.2 (joely@enzo) (gcc version 4.3.3 (GCC) ) #1 Tue Aug 3 21:22:10 CST 2010 cat /proc/cpuinfo # cat /proc/cpuinfo system type : Ralink SoC processor : 0 cpu model : MIPS 74Kc V4.12 BogoMIPS : 249.34 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ff8, 0x08cc, 0x0ff8, 0x0a23] ASEs implemented : mips16 dsp shadow register sets : 1 core : 0 VCED exceptions : not available VCEI exceptions : not available lsmod # lsmod Module Size Used by rt2860v2_ap 923001 1 RT3090_ap_net 24888 1 RT3090_ap 723872 1 RT3090_ap_net RT3090_ap_util 18262 2 RT3090_ap_net,RT3090_ap ifresetcnt 1152 0 cat /proc/cmdline # cat /proc/cmdline console=ttyS1,57600n8 root=/dev/mtdblock1 noinitrd cat /proc/mtd # cat /proc/mtd dev: size erasesize name mtd0: 00400000 00010000 "elbox-flash.0" mtd1: 0027b000 00010000 "rootfs" mtd2: 003a0000 00010000 "upgrade" mtd3: 00010000 00010000 "devconf" mtd4: 00010000 00010000 "devdata" mtd5: 00010000 00010000 "langpack" mtd6: 00400000 00010000 "flash" mtd7: 00030000 00010000 "u-boot" mtd8: 00008000 00010000 "boot env" cat /proc/rt3883/gmac # cat /proc/rt3883/gmac FE_INT_ENABLE : 0x00000f04 DLY_INT_CFG : 0x00000000 TX_BASE_PTR0 : 0x00c00000 TX_CTX_IDX0 : 0x00000092 TX_DTX_IDX0 : 0x00000092 TX_BASE_PTR1(0xb0100120) : 0x00000000 TX_CTX_IDX1(0xb0100128) : 0x00000000 TX_DTX_IDX1(0xb010012c) : 0x00000000 TX_BASE_PTR2(0xb0100140) : 0x00000000 TX_CTX_IDX2(0xb0100148) : 0x00000000 TX_DTX_IDX2(0xb010014c) : 0x00000000 TX_BASE_PTR3(0xb0100150) : 0x00000000 TX_CTX_IDX3(0xb0100158) : 0x00000000 TX_DTX_IDX3(0xb010015c) : 0x00000000 RX_BASE_PTR0 : 0x00c01000 RX_MAX_CNT0 : 0x00000100 RX_CALC_IDX0 : 0x000000ff RX_DRX_IDX0 : 0x00000000 GDMA1_FWD_CFG : 0xc0710000 PDMA_GLO_CFG : 0x00000045 PDMA_RST_CFG : 0x00000000 FE_RST_GL : 0x00000000 MDIO_CFG(0xb0100004) : 0x1f01bc75 CDMA_OQ_STA(0xb010008c) : 0x00000000 GDMA1_OQ_STA(0xb0100090) : 0x00000000 PPE_OQ_STA(0xb0100094) : 0x00000000 PSE_IQ_STA(0xb0100098) : 0x00000000 GDMA1_SCH_CFG(0xb0100024) : 0x00003210 GDMA2_SCH_CFG(0xb0100064) : 0x00003210 CDMA_FC_CFG(0xb0100044) : 0x1c080808 GDMA1_FC_CFG(0xb0100048) : 0x1c080808 FE_GLO_CFG(0xb0100008) : 0x81007d80 GDMA1_SHPR_CFG(0xb0100028) : 0x00000000 GDMA2_SHPR_CFG(0xb0100068) : 0x00000000 PDMA_FC_CFG(0xb01001f0) : 0x3f3f3f3f PDMA_SCH_CFG(0xb0100108) : 0x00000000 ----- RX Counters: GDMA_RX_GBCNT0(0xb0100720) : 0x00000000 GDMA_RX_GPCNT0(0xb0100724) : 0x00000000 GDMA_RX_OERCNT0(0xb0100728) : 0x00000000 GDMA_RX_FERCNT0(0xb010072c) : 0x00000000 GDMA_RX_SERCNT0(0xb0100730) : 0x00000000 GDMA_RX_LERCNT0(0xb0100734) : 0x00000000 GDMA_RX_CERCNT0(0xb0100738) : 0x00000000 GDMA_RX_FCCNT1(0xb010073c) : 0x00000000 ps # ps PID USER VSZ STAT COMMAND 1 0 600 S init 2 0 0 SW [kthreadd] 3 0 0 SW [ksoftirqd/0] 4 0 0 SW [events/0] 5 0 0 SW [khelper] 6 0 0 SW [async/mgr] 7 0 0 SW [sync_supers] 8 0 0 SW [bdi-default] 9 0 0 SW [kblockd/0] 10 0 0 SW [cfg80211] 11 0 0 SW [rpciod/0] 12 0 0 SW [kswapd0] 13 0 0 SW [aio/0] 14 0 0 SW [nfsiod] 15 0 0 SW [crypto/0] 21 0 0 SW [mtdblockd] 28 0 0 SW [unlzma/0] 70 0 1248 S xmldb -n wrgnd08_dlob_dir815 -t 71 0 884 S servd -d schedule_off 182 0 852 S logd -p notice 183 0 828 S klogd -p notice 196 0 848 S gpiod 517 0 836 S portt -c DNAT.PORTT 549 0 860 S ddnsd 565 0 832 S telnetd -l /usr/sbin/login -u Alphanetworks:wrgnd08_d 575 0 712 S -/bin/sh 882 0 988 S udhcpc -i eth3 -H dlinkrouter -p /var/servd/WAN-1-udh 1123 0 848 S updatewifistats -i rai0 -x /phyinf:3 -r /runtime/phyi 1152 0 848 S updatewifistats -i ra0 -x /phyinf:4 -r /runtime/phyin 1276 0 1420 S hostapd /var/topology.conf 1278 0 0 SW [RtmpCmdQTask] 1282 0 0 SW [RtmpCmdQTask] 1347 0 852 S neaps -i br0 -c /var/run/neaps.conf 1362 0 828 S netbios -i br0 -r dlinkrouter 1363 0 844 S llmnresp -i br0 -r dlinkrouter 1402 0 1012 S udhcpd /var/servd/LAN-1-udhcpd.conf 1450 0 960 S lld2d -c /var/lld2d.conf br0 rai0 1569 0 1504 S httpd -f /var/run/httpd.conf 1583 0 984 S dnsmasq -C /var/servd/DNS.conf 1724 0 600 R ps cat /proc/meminfo # cat /proc/meminfo MemTotal: 29100 kB MemFree: 4368 kB Buffers: 2408 kB Cached: 8760 kB SwapCached: 0 kB Active: 6892 kB Inactive: 6048 kB Active(anon): 1772 kB Inactive(anon): 0 kB Active(file): 5120 kB Inactive(file): 6048 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 1788 kB Mapped: 1360 kB Shmem: 0 kB Slab: 8332 kB SReclaimable: 1168 kB SUnreclaim: 7164 kB KernelStack: 312 kB PageTables: 240 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 14548 kB Committed_AS: 3916 kB VmallocTotal: 1048372 kB VmallocUsed: 2632 kB VmallocChunk: 1026332 kB cat /proc/bus/pci/devices # cat /proc/bus/pci/devices 0000 18140802 0 0 20100000 0 0 0 0 0 2000000 10000 0 0 0 0 0 pcieport 0100 18143091 10 20000000 0 0 0 0 0 0 10000 0 0 0 0 0 0 rt2860 #

Pictures

Retail Images

• 
• 
• 

User Images

• 

  board top

• 

  board bottom

• 

  label