D-Link DSL-504T C3
From TechInfoDepot
Jump to navigationJump to search
| ADSL Router with built in 4-Port Switch | |||||||||||||||||
|
| |||||||||||||||||
| Wikipedia | D-Link | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt | Status Unknown | ||||||||||||||||
| OpenWrt | Was Supported | ||||||||||||||||
| Tomato any flavor | Incompatible | ||||||||||||||||
| Gargoyle | Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev | D-Link DSL-504T rev C3 | ||||||||||||||||
| Type | dsl modem, router | ||||||||||||||||
| CPU1 | Texas Instruments TNETD7200 | ||||||||||||||||
| CPU1 Speed | 211 MHz | ||||||||||||||||
| Flash1 Chip | Brand? Model? | ||||||||||||||||
| Flash1 Size | 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||||||
| RAM1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||
| RAM1 Chip | Brand? Model? | ||||||||||||||||
| ETH chip1 | Texas Instruments TNETD7200 | ||||||||||||||||
| Switch | Texas Instruments TNETD7200 | ||||||||||||||||
| Ethernet Port Count | 4-100MbE-LAN | ||||||||||||||||
| Wired Standard | IEEE 802.3i/3u | ||||||||||||||||
|
| |||||||||||||||||
| Stock bootloader | PSPBoot | ||||||||||||||||
| Expansion IF types | none specified | ||||||||||||||||
| Serial Port (UART) | yes | ||||||||||||||||
| JTAG Port | yes | ||||||||||||||||
|
Flags: | |||||||||||||||||
|
| |||||||||||||||||
| Other | |||||||||||||||||
|
| |||||||||||||||||
| 3rd Party Firmware Support |
OpenWrt (Was) | ||||||||||||||||
| Retail | |||||||||||||||||
| Availability | End of Life | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
For a list of all currently documented D-Link devices with specifications, see D-Link.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
OpenWrt Target: ar7
OpenWrt Subtarget: generic
OpenWrt Package architecture: mipsel_mips32
Support started version: 10.03.1
Current supported version: EOL
Last Supported Version: 10.03.1
OpenWrt Subtarget: generic
OpenWrt Package architecture: mipsel_mips32
Support started version: 10.03.1
Current supported version: EOL
Last Supported Version: 10.03.1
Please insert instructions here