D-Link DVA-G3810BN/TL

bgn (G54)
wireless router,dsl modem,analog phone gateway
Wikipedia	D-Link
WikiDevi.wi-cat.ru	D-Link DVA-G3810BN/TL
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Was Supported
Tomato any flavor	Status Unknown
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	D-Link DVA-G3810BN/TL A1
FCC ID	KA2VAG3810BNA1
IC ID	4216A-VAG3810BN
US ID	3P7DL01BDVAG3810B
Type	wireless router, dsl modem, analog phone gateway
CPU1	Broadcom BCM6358
CPU1 Type	BMIPS4350
CPU1 Speed	300 MHz ( 2 cores )
Flash1 Chip	Spansion S29GL064A90TFIR3
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip	PSC A3S56D40ETP-G5
ETH chip1	Broadcom BCM6358
Switch	Broadcom BCM5325F
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified Ethernet OUI: 00:26:5A (10 E, 13 W)
Stock bootloader	CFE 1.0.37-12.1 BCM96358
Stock FW OS	Linux 2.6.16.14 OpenRG
Expansion IF types	Mini PCI, USB 2.0
Mini PCI slots	1
USB ports	1
USB Hub Compatible	Untested
Power	12 VDC, 2.1 A
Connector type	barrel
Serial Port (UART)	yes, internal, 6-pin header, populated, 3.3V TTL, (115200 8N1), J4
Flags: ADSL2+, HomePNA (coax)
Other
Default SSID: telusXXX Default IP address: 192.168.1.254 the IP 192.168.1.254 is used by 157 additional devices of which 0 are D-Link devices Default login user: admin Default login password: telus admin:telus credentials used by 1 additional devices of which 0 are D-Link devices
Manuf/OEM/ODM	Cameo
3rd Party Firmware Support	OpenWrt (Was)
Retail
Availability	End of Life
FCC approval date	03 October 2007
Radio 1
Radio1 module	Cameo WLG-1308
Radio1 module IF	Mini PCI
Chip1	Broadcom BCM4318
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	9

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The FCC ID is strictly for the Cameo wireless module.

"21514WLG13081A1" and "WLG-1308" is silkscreened on the wireless module's board in the FCC photos.

On the OpenWrt wiki

BCM6358KFBG SoC

Coppergate CG3110 chipset on-board for HomePNA support (CG3111 + CG3112)

Silicon Labs Si3215 on-board for VoIP support

The default SSID format appears to be telusXXX, where XXX is the last 3 digits of the MAC address on the unit's label (upper case letters).

It would appear the BSSID is randomly generated.

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm63xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_mips32
Support started version: 14.07
Current supported version: 22.03.7
Unsupported Functions:
DSL modem, 2nd core

Please insert instructions here

JTAG-Serial Info

Serial

Serial Pinouts

The pinout is per the OpenWrt Wiki..

<---
    to the wireless module

(GND) (RxD)
(GND) (3.3)
(GND) (TxD)

--> to BCM6358

Info derived from

boot log • >>

CFE version 1.0.37-12.1 for BCM96358 (32bit,SP,BE) Build Date: Mon Sep 17 16:40:05 PDT 2007 (root@pclinux-lkaplan) Copyright (C) 2000-2006 Broadcom Corporation. Boot Address 0xbe000000 Initializing Arena. Initializing Devices. Parallel flash device: name AM29LV320MT, id 0x2201, size 8192KB Auto-negotiation timed-out 10 MB Half-Duplex (assumed) CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz CPU running TP0 Total memory: 33554432 bytes (32MB) Total memory used by CFE: 0x80401000 - 0x80527F40 (1208128) Initialized Data: 0x8041D720 - 0x8041F760 (8256) BSS Area: 0x8041F760 - 0x80425F40 (26592) Local Heap: 0x80425F40 - 0x80525F40 (1048576) Stack Area: 0x80525F40 - 0x80527F40 (8192) Text (code) segment: 0x80401000 - 0x8041D718 (116504) Boot area (physical): 0x00528000 - 0x00568000 Relocation Factor: I:00000000 - D:00000000 Board IP address : 192.168.1.1 Host IP address : 192.168.1.10 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Board Id (0-9) : 96358VW Number of MAC Addresses (1-32) : 11 Base MAC Address : 02:10:18:01:00:01 PSI Size (1-64) KBytes : 24 Main Thread Number [0|1] : 0 *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 0 Booting from only image (0xbe010000) ... Code Address: 0x80010000, Entry Address: 0x80010000 Decompression OK! Entry at 0x80010000 Closing network. Starting program at 0x80010000 Uncompressing Linux.................................................................................................................................. ..........................................................................................................................Ok Booting the kernel [21474536.480000] Linux version 2.6.16.14 #1 Mon Dec 6 12:34:55 IST 2010 [21474536.480000] 96358VW prom init [21474536.480000] CPU revision is: 0002a010 [21474536.480000] mpi: Detected 5 vdc 16-bit PCMCIA card [21474536.480000] Determined physical RAM map: [21474536.480000] memory: 01f00000 @ 00000000 (usable) [21474536.480000] Reserved 256k KLOG memory starting from Physical 0x01ec0000 [21474536.480000] Built 1 zonelists [21474536.480000] Kernel command line: [21474536.480000] brcm mips: enabling icache and dcache... [21474536.480000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes. [21474536.480000] Primary data cache 16kB, 2-way, linesize 16 bytes. [21474536.480000] Synthesized TLB refill handler (21 instructions). [21474536.480000] Synthesized TLB load handler fastpath (33 instructions). [21474536.480000] Synthesized TLB store handler fastpath (33 instructions). [21474536.480000] Synthesized TLB modify handler fastpath (32 instructions). [21474536.480000] PID hash table entries: 128 (order: 7, 2048 bytes) [21474536.480000] Using 150.000 MHz high precision timer. [21474536.485000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [21474536.490000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [21474536.500000] Memory: 23024k/31744k available (1986k kernel code, 8720k reserved, 317k data, 108k init, 0k highmem) [21474536.610000] Mount-cache hash table entries: 512 [21474536.615000] Checking for 'wait' instruction... available. [21474536.690000] NET: Registered protocol family 16 [21474536.695000] SCSI subsystem initialized [21474536.700000] usbcore: registered new driver usbfs [21474536.705000] usbcore: registered new driver hub [21474536.730000] NTFS driver 2.1.26 [Flags: R/O]. [21474536.735000] io scheduler noop registered [21474536.740000] io scheduler anticipatory registered (default) [21474536.745000] io scheduler deadline registered [21474536.750000] io scheduler cfq registered [21474537.310000] [21474537.310000] Random: 0x9473c980 [21474537.615000] loop: loaded (max 8 devices) [21474537.620000] Initializing USB Mass Storage driver... [21474537.625000] usbcore: registered new driver usb-storage [21474537.630000] USB Mass Storage support registered. [21474537.635000] u32 classifier [21474537.640000] OLD policer on [21474537.640000] NET: Registered protocol family 2 [21474537.695000] IP route cache hash table entries: 256 (order: -2, 1024 bytes) [21474537.700000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [21474537.705000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [21474537.710000] TCP: Hash tables configured (established 1024 bind 1024) [21474537.715000] TCP reno registered [21474537.720000] IPv4 over IPv4 tunneling driver [21474537.725000] GRE over IPv4 tunneling driver [21474537.730000] NET: Registered protocol family 1 [21474537.735000] NET: Registered protocol family 17 [21474537.740000] NET: Registered protocol family 8 [21474537.745000] NET: Registered protocol family 20 [21474537.750000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [21474537.755000] All bugs added by David S. Miller <davem@redhat.com> [21474537.760000] brcmboard: brcm_board_init entry [21474537.760000] bcm963xx_flash: Found 1 x16 devices at 0x0 in 16-bit bank [21474537.765000] Amd/Fujitsu Extended Query Table at 0x0040 [21474537.770000] bcm963xx_flash: Swapping erase regions for broken CFI table. [21474537.775000] number of CFI chips: 1 [21474537.780000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [21474537.785000] Creating 1 MTD partitions on "bcm963xx_flash": [21474537.790000] 0x00000000-0x00800000 : "openrg" [21474537.795000] bcm963xx_flash: detected at 0x1e000000 size 8388608 bytes [21474537.800000] bcm963xx_serial driver v2.0 [21474537.805000] Freeing unused kernel memory: 2105324k freed [21474540.490000] Algorithmics/MIPS FPU Emulator v1.5 [21474541.545000] insmod: add-symbol-file build/debug/rg_klog.o 0xc0003000 -s .data 0xc0003350 -s .bss 0xc00034c0 [21474541.640000] klog loaded [21474541.660000] insmod: add-symbol-file build/debug/rg_klog_ram_be.o 0xc0005000 -s .data 0xc0005760 -s .bss 0xc00058c0 [21474541.720000] klog: Using RAM buffer at address 0xa1ec0000 size 0x40000 [21474541.725000] klog: Invalid magic or checksum, reseting all information. [21474536.480000] Linux version 2.6.16.14 #1 Mon Dec 6 12:34:55 IST 2010 [21474536.480000] 96358VW prom init [21474536.480000] CPU revision is: 0002a010 [21474536.480000] mpi: Detected 5 vdc 16-bit PCMCIA card [21474536.480000] Determined physical RAM map: [21474536.480000] memory: 01f00000 @ 00000000 (usable) [21474536.480000] Reserved 256k KLOG memory starting from Physical 0x01ec0000 [21474536.480000] Built 1 zonelists [21474536.480000] Kernel command line: [21474536.480000] brcm mips: enabling icache and dcache... [21474536.480000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes. [21474536.480000] Primary data cache 16kB, 2-way, linesize 16 bytes. [21474536.480000] Synthesized TLB refill handler (21 instructions). [21474536.480000] Synthesized TLB load handler fastpath (33 instructions). [21474536.480000] Synthesized TLB store handler fastpath (33 instructions). [21474536.480000] Synthesized TLB modify handler fastpath (32 instructions). [21474536.480000] PID hash table entries: 128 (order: 7, 2048 bytes) [21474536.480000] Using 150.000 MHz high precision timer. [21474536.485000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [21474536.490000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [21474536.500000] Memory: 23024k/31744k available (1986k kernel code, 8720k reserved, 317k data, 108k init, 0k highmem) [21474536.610000] Mount-cache hash table entries: 512 [21474536.615000] Checking for 'wait' instruction... available. [21474536.690000] NET: Registered protocol family 16 [21474536.695000] SCSI subsystem initialized [21474536.700000] usbcore: registered new driver usbfs [21474536.705000] usbcore: registered new driver hub [21474536.730000] NTFS driver 2.1.26 [Flags: R/O]. [21474536.735000] io scheduler noop registered [21474536.740000] io scheduler anticipatory registered (default) [21474536.745000] io scheduler deadline registered [21474536.750000] io scheduler cfq registered [21474537.310000] [21474537.310000] Random: 0x9473c980 [21474537.615000] loop: loaded (max 8 devices) [21474537.620000] Initializing USB Mass Storage driver... [21474537.625000] usbcore: registered new driver usb-storage [21474537.630000] USB Mass Storage support registered. [21474537.635000] u32 classifier [21474537.640000] OLD policer on [21474537.640000] NET: Registered protocol family 2 [21474537.695000] IP route cache hash table entries: 256 (order: -2, 1024 bytes) [21474537.700000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [21474537.705000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [21474537.710000] TCP: Hash tables configured (established 1024 bind 1024) [21474537.715000] TCP reno registered [21474537.720000] IPv4 over IPv4 tunneling driver [21474537.725000] GRE over IPv4 tunneling driver [21474537.730000] NET: Registered protocol family 1 [21474537.735000] NET: Registered protocol family 17 [21474537.740000] NET: Registered protocol family 8 [21474537.745000] NET: Registered protocol family 20 [21474537.750000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [21474537.755000] All bugs added by David S. Miller <davem@redhat.com> [21474537.760000] brcmboard: brcm_board_init entry [21474537.760000] bcm963xx_flash: Found 1 x16 devices at 0x0 in 16-bit bank [21474537.765000] Amd/Fujitsu Extended Query Table at 0x0040 [21474537.770000] bcm963xx_flash: Swapping erase regions for broken CFI table. [21474537.775000] number of CFI chips: 1 [21474537.780000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [21474537.785000] Creating 1 MTD partitions on "bcm963xx_flash": [21474537.790000] 0x00000000-0x00800000 : "openrg" [21474537.795000] bcm963xx_flash: detected at 0x1e000000 size 8388608 bytes [21474537.800000] bcm963xx_serial driver v2.0 [21474537.805000] Freeing unused kernel memory: 2105324k freed [21474540.490000] Algorithmics/MIPS FPU Emulator v1.5 [21474541.545000] insmod: add-symbol-file build/debug/rg_klog.o 0xc0003000 -s .data 0xc0003350 -s .bss 0xc00034c0 [21474541.640000] klog loaded [21474541.660000] insmod: add-symbol-file build/debug/rg_klog_ram_be.o 0xc0005000 -s .data 0xc0005760 -s .bss 0xc00058c0 [21474541.720000] klog: Using RAM buffer at address 0xa1ec0000 size 0x40000 [21474541.725000] klog: Invalid magic or checksum, reseting all information. [21474541.735000] klog initialization succeeded [21474541.735000] klog RAM store initialization succeeded. [21474541.765000] insmod: add-symbol-file build/debug/be_pppoa_mod.o 0xc0000000 -s .data 0xc0000ee0 -s .bss 0xc0001020 [21474542.310000] insmod: add-symbol-file build/debug/one_module.o 0xc0088000 -s .main_flow 0xc00c69b0 -s .data 0xc00d3f00 -s .bss 0xc00d5b20 [21474542.515000] Loading license 12756d10c06ed9d96dd9896254d3c50ee0c276679b883cbb450fbff356416a5ef3ee2aed6da460685201b6f9b2c70994aab0835ff106a7e134f77e8507596535d a8aa90b67ac8a789377fecc7c4e66932b782a4032b13f5995ce075b47fe22fd56effe2c70c3e94e039f.Dlink [21474542.520000] loading license key: Dlink [21474542.525000] loading license key: Dlink [21474542.555000] insmod: add-symbol-file build/debug/igmp_proxy_mod.o 0xc000c000 -s .data 0xc000d830 -s .bss 0xc000d9a0 Searching for flash-layout... ( 2.420000) Can't find flash layout section. Use default Press ESC to enter BOOT MENU mode. MAPS: 00400000-00740000 r-xp 00000000 00:07 909552 /mnt/cramfs/bin/openrg 10000000-10075000 rw-p 00340000 00:07 909552 /mnt/cramfs/bin/openrg 10075000-10174000 rwxp 10075000 00:00 0 [heap] 2aaa8000-2aaad000 r-xp 00000000 00:07 3599648 /mnt/cramfs/lib/ld-uClibc-0.9.28.so 2aaad000-2aaae000 rw-p 2aaad000 00:00 0 2aaec000-2aaed000 rw-p 00004000 00:07 3599648 /mnt/cramfs/lib/ld-uClibc-0.9.28.so 2aaed000-2aafd000 r-xp 00000000 00:07 4051332 /mnt/cramfs/lib/libopenrg.so 2aafd000-2ab3c000 ---p 2aafd000 00:00 0 2ab3c000-2ab3d000 rw-p 0000f000 00:07 4051332 /mnt/cramfs/lib/libopenrg.so 2ab3d000-2ab76000 r-xp 00000000 00:07 3947716 /mnt/cramfs/lib/libjutil.so 2ab76000-2abb5000 ---p 2ab76000 00:00 0 2abb5000-2abba000 rw-p 00038000 00:07 3947716 /mnt/cramfs/lib/libjutil.so 2abba000-2abc0000 rw-p 2abba000 00:00 0 2abc0000-2abf8000 r-xp 00000000 00:07 4189668 /mnt/cramfs/lib/libssl.so 2abf8000-2ac37000 ---p 2abf8000 00:00 0 2ac37000-2ac3b000 rw-p 00037000 00:07 4189668 /mnt/cramfs/lib/libssl.so 2ac3b000-2ad36000 r-xp 00000000 00:07 3613944 /mnt/cramfs/lib/libcrypto.so 2ad36000-2ad75000 ---p 2ad36000 00:00 0 2ad75000-2ad87000 rw-p 000fa000 00:07 3613944 /mnt/cramfs/lib/libcrypto.so 2ad87000-2ad8b000 rw-p 2ad87000 00:00 0 2ad8b000-2ad8d000 r-xp 00000000 00:07 3944324 /mnt/cramfs/lib/libdl-0.9.28.so 2ad8d000-2adcc000 ---p 2ad8d000 00:00 0 2adcc000-2adcd000 rw-p 00001000 00:07 3944324 /mnt/cramfs/lib/libdl-0.9.28.so 2adcd000-2addd000 r-xp 00000000 00:07 4094816 /mnt/cramfs/lib/librg_config.so 2addd000-2ae1d000 ---p 2addd000 00:00 0 2ae1d000-2ae1f000 rw-p 00010000 00:07 4094816 /mnt/cramfs/lib/librg_config.so 2ae1f000-2ae2e000 r-xp 00000000 00:07 4028548 /mnt/cramfs/lib/libm-0.9.28.so 2ae2e000-2ae6d000 ---p 2ae2e000 00:00 0 2ae6d000-2ae6e000 rw-p 0000e000 00:07 4028548 /mnt/cramfs/lib/libm-0.9.28.so 2ae6e000-2ae6f000 r-xp 00000000 00:07 4354708 /mnt/cramfs/lib/libutil-0.9.28.so 2ae6f000-2aeae000 ---p 2ae6f000 00:00 0 2aeae000-2aeaf000 rw-p 00000000 00:07 4354708 /mnt/cramfs/lib/libutil-0.9.28.so 2aeaf000-2aeb1000 r-xp 00000000 00:07 4356568 /mnt/cramfs/lib/libwl.so 2aeb1000-2aef0000 ---p 2aeb1000 00:00 0 2aef0000-2aef1000 rw-p 00001000 00:07 4356568 /mnt/cramfs/lib/libwl.so 2aef1000-2af2f000 r-xp 00000000 00:07 4268516 /mnt/cramfs/lib/libuClibc-0.9.28.so 2af2f000-2af6e000 ---p 2af2f000 00:00 0 2af6e000-2af71000 rw-p 0003d000 00:07 4268516 /mnt/cramfs/lib/libuClibc-0.9.28.so 2af71000-2af74000 rw-p 2af71000 00:00 0 7fa2a000-7fa3f000 rwxp 7fa2a000 00:00 0 [stack] [21474548.190000] insmod: add-symbol-file build/debug/rg_klog_chardev.o 0xc0009000 -s .data 0xc00093a0 -s .bss 0xc0009500 [21474548.245000] klog chardev initialized. [21474548.265000] insmod: add-symbol-file build/debug/log_chardev.o 0xc0007000 -s .data 0xc0007830 -s .bss 0xc0007980 [21474548.340000] insmod: add-symbol-file build/debug/tcp_mss.o 0xc0012000 -s .data 0xc0012560 -s .bss 0xc00126c0 [21474548.420000] insmod: add-symbol-file build/debug/rg_dhcp_pktfil.o 0xc000f000 -s .data 0xc000fe50 -s .bss 0xc000ffa0 [21474548.495000] insmod: add-symbol-file build/debug/rg_ipv4.o 0xc0016000 -s .data 0xc0016200 -s .bss 0xc0016360 [21474548.550000] IPV4 device driver registered [21474548.585000] insmod: add-symbol-file build/debug/pppoe_relay.o 0xc001e000 -s .data 0xc0020be0 -s .bss 0xc0020d00 [21474548.665000] insmod: add-symbol-file build/debug/rg_pppoe_relay.o 0xc0014000 -s .data 0xc00146e0 -s .bss 0xc0014840 [21474548.780000] insmod: add-symbol-file build/debug/bcm963xx_eth_mod.o 0xc0041000 -s .data 0xc0045f50 -s .bss 0xc0046100 [21474548.840000] Broadcom BCM6358A1 Ethernet Network Device v0.3 Dec 6 2010 12:18:33 [21474548.850000] Config Internal PHY Through MDIO [21474549.885000] BCM63xx_ENET: Auto-negotiation timed-out [21474549.890000] BCM63xx_ENET: 10 MB Half-Duplex (assumed) [21474549.940000] bcm0: MAC Address: 00:10:18:63:00:00 [21474549.945000] Broadcom BCM6358A1 Ethernet Network Device v0.3 Dec 6 2010 12:18:33 [21474549.955000] Config Ethernet Switch Through MDIO Pseudo PHY Interface [21474550.005000] bcm1: MAC Address: 00:10:18:63:00:01 [21474550.110000] insmod: add-symbol-file build/debug/bcm963xx_atmapi_mod.o 0xc0062000 -s .data 0xc0070c30 -s .bss 0xc0071060 [21474550.895000] insmod: add-symbol-file build/debug/bcm963xx_adsl_mod.o 0xc01a2000 -s .data 0xc0221b30 -s .bss 0xc02223e0 [21474550.970000] adsl: adsl_init entry [21474551.010000] insmod: add-symbol-file build/debug/bcm963xx_atm_mod.o 0xc0018000 -s .data 0xc001af40 -s .bss 0xc001b0a0 [21474551.085000] BcmAdsl_Initialize=0xC01AEE88, g_pFnNotifyCallback=0xC0221C34 [21474551.090000] AnnexCParam=0x00000000 AnnexAParam=0x00000980 adsl2=0x00000001 [21474551.165000] pSdramPHY=0xA1FFFFF8, 0xF00FF04F 0xF00FF00F [21474551.200000] AdslCoreHwReset: AdslOemDataAddr = 0xA1FEEACC [21474551.205000] AnnexCParam=0x00000000 AnnexAParam=0x00000980 adsl2=0x00000001 [21474551.215000] ATM proc init !!! [21474551.220000] AdslCoreEcUpdTmr: timeMs=-285260 ecUpdMask=0x40000 [21474551.230000] blaadd: blaa_detect entry [21474552.385000] insmod: add-symbol-file build/debug/endpointdd_mod.o 0xc0339000 -s .data 0xc03b3020 -s .bss 0xc0414340 [21474552.560000] Endpoint: endpoint_init entry [21474552.565000] BOS: Enter bosInit [21474552.570000] Enter bosAppInit [21474552.575000] Exit bosAppInit [21474552.575000] BOS: Exit bosInit [21474552.580000] Endpoint: endpoint_init COMPLETED [21474552.660000] insmod: add-symbol-file build/debug/slic_control.o 0xc0038000 -s .data 0xc00381c0 -s .bss 0xc0038320 [21474552.775000] insmod: add-symbol-file build/debug/ehci-hcd_mod.o 0xc0055000 -s .data 0xc005c5a0 -s .bss 0xc005c7a0 [21474552.880000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) [21474552.885000] ehci_hcd 0000:00:0a.0: EHCI Host Controller [21474552.890000] ehci_init: 1 [21474552.895000] ehci_init: 2 [21474552.895000] ehci_init: 3 [21474552.900000] ehci_init: 4 [21474552.975000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 [21474552.980000] ehci_hcd 0000:00:0a.0: irq 18, io mem 0xfffe1300 [21474552.985000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00, driver 10 Dec 2004 [21474553.035000] usb usb1: configuration #1 chosen from 1 choice [21474553.085000] hub 1-0:1.0: USB hub found [21474553.085000] hub 1-0:1.0: 2 ports detected [21474553.240000] hub 1-0:1.0: over-current change on port 1 [21474553.285000] insmod: add-symbol-file build/debug/ohci-hcd_mod.o 0xc003c000 -s .data 0xc003fbb0 -s .bss 0xc003fdc0 [21474553.390000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002) [21474553.395000] ohci_hcd 0000:00:09.0: OHCI Host Controller [21474553.445000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 [21474553.450000] ohci_hcd 0000:00:09.0: irq 13, io mem 0xfffe1400 [21474553.555000] usb usb2: configuration #1 chosen from 1 choice [21474553.600000] hub 2-0:1.0: USB hub found [21474553.605000] hub 2-0:1.0: 2 ports detected [21474554.825000] insmod: add-symbol-file build/debug/wl.o 0xc022c000 -s .data 0xc02ff440 -s .bss 0xc0306a00 [21474554.950000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006) [21474555.025000] wl0: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.15.cpe2.2b [21474555.060000] insmod: add-symbol-file build/debug/rtp.o 0xc004f000 -s .data 0xc0050eb0 -s .bss 0xc0051000 [21474555.155000] insmod: add-symbol-file build/debug/phone_mod.o 0xc005e000 -s .data 0xc005f570 -s .bss 0xc005f760 [21474555.235000] insmod: add-symbol-file build/debug/jtimer.o 0xc004a000 -s .data 0xc004a490 -s .bss 0xc004a5e0 [21474555.330000] insmod: add-symbol-file build/debug/bcm963xx_jdsp_mod.o 0xc010d000 -s .data 0xc010f5f0 -s .bss 0xc010f860 [21474555.390000] kernel::endpoint_open [21474555.390000] kernel::endpoint_open COMPLETED [21474555.395000] Enter bosStartApp [21474555.400000] [21474555.400000] [21474555.400000] bosAppRootTask() - Is it morning already? Spawning app task (epoch #0)... [21474555.400000] [21474555.405000] Enter TaskCreate aoAP [21474555.405000] TaskCreate - spawn new task aoAP [21474555.410000] Exit TaskCreate [21474555.415000] AppResetDetectionEnable() - Enabled reset detection. [21474555.420000] Exit bosStartApp [21474555.435000] PLL init completed. PLL registers set to: [21474555.440000] PCM->pcm_pll_ctrl1 = 0x00020001 [21474555.445000] PCM->pcm_pll_ctrl2 = 0x0008492B [21474555.450000] PCM->pcm_pll_ctrl3 = 0x00001E1C [21474555.465000] Set up PCM registers [21474555.465000] Channel 0 assigned to timeslot 0 [21474555.470000] Channel 1 assigned to timeslot 1 [21474555.475000] Channel 2 assigned to timeslot 2 [21474555.480000] Tx Desc (0xA1D1F000): chan 0, buf 0, sts 0xe000, len 1280, bufp 0x1c87000 [21474555.485000] Tx Desc (0xA1D1F008): chan 0, buf 1, sts 0x7000, len 1280, bufp 0x1c87510 [21474555.490000] Rx Desc (0xA1280000): chan 0, buf 0, sts 0x8000, len 1280, bufp 0x1809000 [21474555.495000] Rx Desc (0xA1280008): chan 0, buf 1, sts 0x9000, len 1280, bufp 0x1809510 [21474555.500000] initIudma: chan 0, descBase 0xa1280000, descBaseIudma 0x1280000 [21474555.505000] initIudma: chan 1, descBase 0xa1d1f000, descBaseIudma 0x1d1f000 [21474555.610000] PCM ENABLE INFO: DMA0 IRQ STATUS 0x00000000 [21474555.615000] PCM ENABLE INFO: DMA0 IRQ MASK 0x00000005 [21474555.620000] PCM ENABLE INFO: DMA1 IRQ STATUS 0x00000000 [21474555.625000] PCM ENABLE INFO: DMA1 IRQ MASK 0x00000005 [21474555.630000] PCM ENABLE INFO: PCM IRQ MASK 0x00000003 [21474555.635000] PCM ENABLE INFO: PCM IRQ PENDING 0x00000007 [21474555.640000] Enter TaskCreate CMT_EXCEPTION_IST [21474555.645000] TaskCreate - spawn new task CMT_EXCEPTION_IST [21474555.650000] Exit TaskCreate [21474555.655000] regStatus (reg 12 sel 0) = 0x10008501 [21474555.660000] regStatus (reg 12 sel 7) = 0x00000101 [21474555.665000] regCause (reg 13 sel 0) = 0x00000000 [21474555.670000] regCause (reg 13 sel 7) = 0x00808800 [21474555.675000] regCMT (reg 22 sel 0) = 0xe31e1006 [21474555.680000] regCMT (reg 22 sel 1) = 0x10008001 [21474555.685000] DSP load address = 0x81F00000 [21474555.700000] Kicking off secondary thread processor at entry point 0x81F00000... [21474555.705000] Secondary thread processor entry point at 0x81f00000 [21474555.720000] Thread processor handshake. Secondary app initialized properly. [21474555.725000] Enter TaskCreate HTSK [21474555.730000] TaskCreate - spawn new task HTSK [21474555.735000] Exit TaskCreate [21474555.740000] SUCCESS: Took semaphore [21474555.740000] SUCCESS: Gave semaphore [21474555.745000] INFO: MSPI POLLING MODE [21474555.750000] INFO: IRQ MASK 0xa0000624 [21474555.755000] INFO: IRQ STATUS 0x40400000 [21474555.755000] INFO: BLOCK ENABLES 0x3e0320 [21474555.760000] MSPI INITIALIZED [21474555.765000] slicConfigure() reading 0 from slic 0 devId 2 [21474555.790000] slicConfigure() reading 3 from slic 0 devId 2 [21474555.815000] Read Si3215 Revision H on slic 0 [21474555.835000] Direct read/write test passed on slic 0 [21474555.840000] Indirect read/write test passed on slic 0 [21474555.865000] Entering SLIC DC Power Calibration check ......Passed [21474555.870000] Entering SLIC Calibration check................Passed [21474556.230000] Entering Manual Calibration check................Passed 1 ... Passed 2 [21474557.275000] slicConfigure: Setting CODEC on slic 0 to linear 16-bit mode [21474557.280000] SLIC 0 PCM settings: txCountLow 1, txCountHi 0 [21474557.285000] SLIC 0 PCM settings: rxCountLow 1, rxCountHi 0 [21474557.310000] boardHalInit6358: Initialization complete. [21474557.315000] boardHalInit completed [21474557.315000] Enter TaskCreate HRTBEAT [21474557.320000] TaskCreate - spawn new task HRTBEAT [21474557.325000] Exit TaskCreate [21474557.330000] HEARTBEAT: Initialized! [21474557.335000] bosMsgQCreate: Created message queue VRGEVQ at address 0x0 [21474557.340000] Enter TaskCreate VRGEVPR [21474557.345000] TaskCreate - spawn new task VRGEVPR [21474557.350000] Exit TaskCreate [21474557.350000] Enter TaskCreate HCAS [21474557.355000] TaskCreate - spawn new task HCAS [21474557.360000] Exit TaskCreate *** gStartRxDesc[0] = 0xA1280000 *** gBufferSizeBytes = 1280 *** gStartTxDesc[0] = 0xA1D1F000 hal6358PcmInit 260 nextTxDesc = 0xA1D1F000 hal6358PcmInit 260 nextTxDesc = 0xA1D1F008 hal6358PcmInit 264 Ownership for TX desc not set. Use this buffer. PERF->IrqMask = 0xA0000624 PERF->IrqMask1 = 0x00800000 [21474557.415000] Default value for provItemId '209' did not exist [21474557.490000] [21474557.490000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x50) of type: 0x0 [21474557.660000] [21474557.660000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x51) of type: 0x0 [21474557.830000] [21474557.830000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x52) of type: 0x3 [21474558.000000] [21474558.000000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x53) of type: 0x3 [21474558.230000] [21474558.230000] ENDPT: hdspVhdOpen Line VHD success. DSP 0, VHD (0x54) of type: 0x7 [21474558.260000] Default value for provItemId '204' did not exist [21474558.265000] boardHalCasGetDriver: chan = 0 [21474558.270000] Default value for provItemId '41' did not exist [21474558.275000] Default value for provItemId '207' did not exist [21474558.280000] Default value for provItemId '208' did not exist [21474558.285000] Default value for provItemId '57' did not exist [21474558.290000] Default value for provItemId '206' did not exist [21474558.320000] ENDPT: Initialization completed successfully for endpt 0 [21474558.320000] [21474558.325000] boardHalCasGetDriver: chan = 0 [21474558.330000] Capabilities: [21474558.335000] G.711: TRUE [21474558.335000] G.729A: TRUE [21474558.340000] G.729: FALSE [21474558.345000] G.729E: FALSE [21474558.350000] G.729B: TRUE [21474558.350000] G.723.1: TRUE [21474558.355000] G.728: FALSE [21474558.360000] G.726: TRUE [21474558.365000] BV16: TRUE [21474558.365000] BV32: FALSE [21474558.370000] iLBC: TRUE [21474558.375000] T.38: TRUE [21474558.380000] Distributed: TRUE [21474558.380000] Wideband: FALSE [21474558.385000] ICP: TRUE [21474558.390000] GPLC: TRUE [21474558.395000] BVC: TRUE [21474558.395000] [21474558.400000] Frame rate: 10 ms [21474558.405000] [21474558.405000] Max endpts: 2 [21474558.410000] Max full connections: 2 [21474558.410000] Max lite connections: 2 [21474558.420000] Endpoint Event task started... [21474558.420000] Endpoint Packet task started [21474558.425000] voice-write task started... [21474558.455000] insmod: add-symbol-file build/debug/btn.o 0xc0036000 -s .data 0xc0036690 -s .bss 0xc0036800 [21474558.540000] insmod: add-symbol-file build/debug/qos_ingress.o 0xc0053000 -s .data 0xc0053240 -s .bss 0xc00533a0 [21474558.635000] insmod: add-symbol-file build/debug/bcm53xx_mod.o 0xc0078000 -s .data 0xc007a480 -s .bss 0xc007a5e0 [21474558.720000] Freeing CRAMFS/MODFS memory: 1280k freed Using Asterisk version 1.2.4 [21474563.010000] bcm53xx: MII port status overwritten to: connected, 100Mbit, full-duplex [21474563.495000] AnnexCParam=0x00000000 AnnexAParam=0x00000980 adsl2=0x00000000 [21474563.700000] device bcm1 entered promiscuous mode [21474564.115000] device wl0 entered promiscuous mode [21474565.140000] device wl0 left promiscuous mode [21474565.210000] device wl0 entered promiscuous mode ( 0.000000) HPNA (cg0): Loading firmware ( 0.890000) HPNA (cg0): Loading firmware /etc/coax_12-28Mhz_downloadable_cg.bin ( 4.630000) HPNA (cg0): Setting MAC address 00:c5:d9:5d:00:39 ( 5.540000) HPNA (cg0): Activating the firmware ( 6.190000) HPNA (cg0): Firmware activated successfully [21474573.145000] device bcm1 left promiscuous mode [21474573.170000] device bcm1 entered promiscuous mode ( 0.000000) HPNA (cg0): Loading firmware Username: ( 8.900000) HPNA (cg0): Loading firmware /etc/coax_12-28Mhz_downloadable_cg.bin ( 11.190000) HPNA (cg0): Setting MAC address 00:c5:d9:5d:00:39 ( 11.740000) HPNA (cg0): Activating the firmware ( 12.320000) HPNA (cg0): Firmware activated successfully