D-Link DWL-2100AP rev A5

multiple revisions of this device, use caution

bg (G108)
XtremeG 108M Wireless Access Point
Homepage	Product page (EN) Product page (RU)
Wikipedia	D-Link
WikiDevi.wi-cat.ru	D-Link DWL-2100AP rev A5
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	D-Link DWL-2100AP A5
FCC ID	RRK2004042018-1
IC ID	4216A-WL2100AP
Type	access point
Series	DWL-2100AP
CPU1	Atheros AR2313A
CPU1 Type	MIPS 4Kc
CPU1 Speed	180 MHz
Flash1 Chip	Macronix MX29LV320DBTI-70G
Flash1 Size	4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size	16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip	ESMT M12L128168A-7T
ETH chip1	Atheros AR2313A
ETH chip2	IC+ IP101A
Ethernet Port Count	1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 14:D6:4D (9 E, 9 W) Ethernet OUI: 14:D6:4D (9 E, 9 W)
Expansion IF types	none specified
Power	5 VDC, 2 A
Connector type	barrel 5.5 mm (OD) 2 mm (ID) 10 mm (LEN)
Serial Port (UART)	yes, internal, unpopulated, 3.3V TTL, 4-pin header
JTAG Port	yes
Other
Default SSID: dlink (37 addl. devices) Default IP address: 192.168.0.50 the IP 192.168.0.50 is used by 62 additional devices of which 62 are D-Link devices Default login user: admin Default login password: blank admin:blank credentials used by 367 additional devices of which 193 are D-Link devices
Manuf/OEM/ODM	Alpha Networks
Retail
FCC approval date	15 July 2004
Country of manuf	China
Radio 1
Chip1	Atheros AR2313A
Chip2	Atheros AR2112A
Wireless interface OUI	14:D6:4D
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 108 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID D-Link DWL-2100AP rev A4 RRK2004042018-1
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand D-Link DWL-2100AP rev A1 D-Link DWL-2100AP rev A2 Atheros Atheros Atheros D-Link DWL-2100AP rev A3 Atheros Atheros Atheros D-Link DWL-2100AP rev A4 Atheros Atheros Atheros D-Link DWL-2100AP rev A5 Atheros Atheros Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented IC+ chipsets with specifications, see IC+.

For a list of all currently documented D-Link device with specifications, see D-Link.

• 108 Mbps - 2.4GHz 802.11g = G108 class

Overview

Standard bandwidth: 54 Mbit/s, Maximum bandwidth: 108 Mbit/s
(only via D-Link device with XtremeG 108M: DWL-G520, DWL-G520+, DWL-G132)

Hardware

• DWL-2100AP on OpenWrt Wiki
• DWL-2100AP on SOWN Wiki

D-Link hardware revision A4, firmware revision 2.20EU

• CPU: Atheros AR2313A-001 B52307B 0635 TAIWAN
• RAM: ESMT M12L128168A-7T AZG1P536E 0610 (16MB)
• Flash: Spansion S29GL032M90TFIR4 0634CRM-K (4MB)
• Eth: IC+ IP101A-LF 0640C15 KPF0005.1 (10/100Mbps)

Links of Interest

Fotum threads

• DD-WRT forum theme about DWL-2100
• DD-WRT forum thread about DWL-2100 in theme about Atheros SoC
• Bootloader for MX29LV320D (D-Link DWL-2100AP rev A5) - Ivan8 on OpenWRT forum
• Flashing D-Link DWL-2100 to D-Link DWL-3200AP (ru)
• Flashing DWL-2100 via FTP (ru)

JTAG-Serial Info

JTAG

JTAG connector: J5

Serial

Serial connector: JP2(See Pic.2.)

Serial Pinouts

pin4	pin3	pin2	empty	pin1
RX	Ground	VCC +3.3V	-	TX

Pictures

User Images

• internal
• 

  Pic.1. Board top view

• 

  Pic.2. Serial and JTAG

• 

  Pic.3. Board bottom view

• case
• 

  Pic.4. Case bottom

Notes

1. Rexxer reportes about power currency: with 5V 1A DWL-2100AP worked fine.
2. Serial port with TTL levels, don't plug to RS232C otherwise CPU will be damaged!
It is need interface converter between Serial port of AP and RS232C port of PC.
3. Board like DWL-2100AP Rev. A4. Same board used in the DWL-2100 (North America/Europe),
DWL-2010 (North America), DWL-2200 (North America/Europe) and Alpha Networks WAPD19.
List of devices printed at top left corner of the board.
4. Board marked with text "8WAPD19..9A1G"
5. Board contain small internal anthenna (located near at LED "WLAN")
6. Admin's password length restricted to 12 characters max (may be 0..12 chars)

Administer with CLI

Some features available only via text console or telnet or SSH. Login and password same as in the web interface.
To get list of available commands type "help". For save changes and close session type "quit".

Service mode

Telnet or SSH to device, login, enter command "alpha" and next password "sdd21234". You are in the service mode.
Command "help" displays all commands (user-level and service-level).

See also

• D-Link DWL-2100AP rev A1
• D-Link DWL-2100AP rev A2
• D-Link DWL-2100AP rev A3
• D-Link DWL-2100AP rev A4
• D-Link DWL-2100AP rev A5