D-Link DWL-8610AP rev A1
abgn+ac (AC1750) | |
---|---|
Dual-Band 802.11ac Unified Wireless Access Point | |
Wikipedia | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Status Unknown |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
D-Link DWL-8610AP A1 |
FCC ID | |
IC ID | |
Type |
access point |
CPU1 |
Broadcom BCM53012 |
CPU1 Type |
ARM Cortex-A9 |
CPU1 Speed |
not specified ( 2 cores ) |
Flash1 Chip |
Spansion S34ML01G100TFI00 |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
RAM1 Chip |
Micron Model? x 2 |
ETH chip1 |
Broadcom BCM53012 |
Switch |
Broadcom BCM53012 |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Expansion IF types |
Mini PCIe |
Mini PCIe slots |
1 |
PoE |
802.3at, standard |
Power |
12 VDC, 2 A |
Connector type |
barrel |
Serial Port (UART) |
yes, 3.3, (115200 8N1) |
JTAG Port |
yes |
Additional chips | |
Other | |
Default IP address: 10.90.90.91 | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
End of Life date | 2020 |
FCC approval date | 25 October 2013 |
ASIN | B00LPMQ376 |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM43431 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 450 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Radio2 module | |
Radio2 module IF |
Mini PCIe |
Chip1 |
Broadcom BCM43460 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/b/g/n/ac |
802.11ac |
up to 1300 Mbps |
802.11n |
up to 450 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
2.4 or 5 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented D-Link device with specifications, see D-Link.
Overview
This device is presumed to be using one of the newer Broadcom ARM SoCs.
Default settings are per the FCC manual.
- The default SSID patterns are stated to be dlinkX, where X is a number between 1 and 15.
The power supply shown in the FCC photos is an Asian Power Devices WA-24E12 (100-240VAC ~ 50–60 Hz, 0.65A max. -> 12VDC, 2A).
- Wi-Fi Certified : WFA50181 (as of 12/03/2013)
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
OpenWrt Target: bcm53xx
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_cortex-a9
Support started version: 23.05.0
Current supported version: 23.05.5
Please insert instructions here
- D-Link
- Embedded system/access point
- Embedded System Broadcom
- Embedded System BCM53012
- Broadcom
- Embedded System ARM
- Embedded System Cortex-A9
- Manuf Alpha Networks
- OpenWrt Supported
- Embedded System BCM43431
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System BCM43460
- Embedded System IEEE 802.11a/b/g/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- Wi-Fi Certified
- English Documentation