dog hunter Microdog
From TechInfoDepot
Jump to navigationJump to search
bgn (N150) | |
---|---|
Wi-Fi enabled Arduino | |
WikiDevi.wi-cat.ru | Dog hunter Microdog |
3rd Party Firmware | |
dd-wrt | Status Unknown |
OpenWrt | Supported |
Tomato any flavor | Incompatible |
Gargoyle | Status Unknown |
Platform | |
Brand • Model • Rev | dog hunter Microdog |
Model Part Number | DHQDH-W02 |
FCC ID | 2AAO2MICRODOG |
Type | Wi-Fi enabled Arduino |
CPU1 ![]() | Atheros AR9331 |
CPU1 Type | MIPS 24Kc |
CPU1 Speed | 400 MHz |
Flash1 Chip | Brand? Model? |
Flash1 Size | 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size | 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
RAM1 Chip | Winbond W9751G6KB-25 |
802dot11 OUI: none specified | |
Stock FW OS | Linux |
Expansion IF types | none specified |
Power | 5 VDC, ? A |
Connector type | USB Female (Micro-B) |
| |
Additional chips | |
Other | |
| |
3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
Retail | |
FCC approval date | 18 February 2014 |
Radio 1 | |
Chip1 | Atheros AR9331 |
Wireless interface OUI | none specified |
Antenna Connector Type | none specified |
MIMO status | 1x1:1 |
Wireless Standard | IEEE 802.11b/g/n |
802.11n | up to 150 Mbps |
802.11g | up to 54 Mbps |
802.11b | up to 11 Mbps |
WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: unknown
OpenWrt Subtarget: unknown
OpenWrt Package architecture: unknown
Support started version: unknown
Current supported version: reported on WikiDevi
OpenWrt Subtarget: unknown
OpenWrt Package architecture: unknown
Support started version: unknown
Current supported version: reported on WikiDevi
Please insert instructions here