Double Win PL9510-WAP

b (B11)
WireLink PL Wireless Access Point
WikiDevi.wi-cat.ru	Double Win PL9510-WAP
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Double Win PL9510-WAP
FCC ID	QX4DW920290, MXF-C900924
Type	Powerline Access Point
CPU1	Ubicom IP2022
CPU1 Type	Ubicom 32
CPU1 Speed	not specified
CPU2	Intellon INT51X1A0
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Ubicom IP2022
ETH chip2	Altima AC101L
802dot11 OUI: none specified
Expansion IF types	PCMCIA (16-bit)
PCMCIA slots	1
Power	8 VDC, 1.3 A
Flags: HomePlug 1.0, schematics
Retail
FCC approval date	05 May 2003
Country of manuf	Taiwan
Radio 1
Radio1 module	Gemtek WL-316C
Radio1 module IF	PCMCIA (16-bit)
Chip1	Intersil Model?
Chip2	Intersil ISL3685
Wireless interface OUI	none specified
Antenna Connector Type	MMCX, RP-SMA
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
FCC ID Cellvision CAS-200W QTRCAS10001 MXF-C900924 D-Link DCS-1000W KA2DCS-1000W QTRCAS10001 MXF-C900924 D-Link DI-713P rev E1 MXF-C900924 Gemtek WL-316C MXF-C900924 MSI RG11B (MS-6811) I4L-MS6811 MXF-C900924

For a list of all currently documented Altima chipsets with specifications, see Altima.
For a list of all currently documented Intellon chipsets with specifications, see Intellon.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

This device was sold by Asoka.

Product page (via archive.org)

Review on PC Magazine

There is an Intellon INT51X1A0 on-board.

The sample SSID in the FCC manual is wlandemo.