Dovado 3GN

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
wireless router
WikiDevi.wi-cat.ru Dovado 3GN
3rd Party Firmware
dd-wrt Incompatible
OpenWrt Was Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
BrandModelRev Dovado 3GN
FCC ID none specified
Type wireless router
CPU1 checkY Ralink RT3050F
CPU1 Type MIPS 24KEc
CPU1 Speed 320 MHz 16-bit
Flash1 Chip Brand? Model?
Flash1 Size 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip Brand? Model?
ETH chip1 Ralink RT3050F
Switch Ralink RT3050F
Ethernet Port Count 1-100MbE-WAN
4-100MbE-LAN
Wired Standard IEEE 802.3i/3u

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 2.0
USB ports 1
USB Hub Compatible Untested
Power 12 VDC, 1 A
Serial Port (UART) yes
JTAG Port no
Other

Default SSID: DOVADO (5 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 818 additional devices
of which 5 are Dovado devices
Default login user: admin
Default login password: password
admin:password credentials used by 426 additional devices
of which 5 are Dovado devices

3rd Party Firmware Support OpenWrt (Was)
Retail
Availability End of Life
EAN 2724261339782
(UPC DB, On eBay)
Radio 1
Chip1 Ralink RT3050F
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 1x1:1
Wireless Standard IEEE 802.11b/g/n
802.11n up to 150 Mbps
802.11g up to 54 Mbps
802.11b up to 11 Mbps
WiFi Operating Frequency 2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 15.05
Current supported version: EOL
Last Supported Version: 19.07.10

Please insert instructions here