DrayTek Vigor AP810
From TechInfoDepot
Jump to navigationJump to search
| bgn (N300) | |
|---|---|
| 802.11n Access Point | |
|
| |
| WikiDevi.wi-cat.ru | DrayTek VigorAP 810 |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | DrayTek Vigor AP810 |
| FCC ID (fcc.io) | VGYVAP810 |
| FCC ID (fcc.report) | VGYVAP810 |
| Board ID | 8WAPN23B.0A1G |
| Type | access point |
| CPU1 | MediaTek MT7620N |
| CPU1 Type | MIPS 24KEc |
| CPU1 Speed | 580 MHz |
| Flash1 Chip | Macronix Model? |
| Flash1 Size | 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size | 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip | ESMT M14D5121632A |
| ETH chip1 | MediaTek MT7620N |
| Switch | MediaTek MT7620N |
| Ethernet Port Count | 5-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types | USB 2.0 |
| USB ports | 1 |
| USB Hub Compatible | Untested |
| Power | 12 VDC, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, internal, 4-pin header, 3.3V TTL |
|
| |
|
| |
| Other | |
|
Default IP address: 192.168.1.2 | |
| Manuf/OEM/ODM | Alpha Networks WAP-N23B |
| Retail | |
| FCC approval date | 19 February 2014 |
| ASIN |
B00494R0UQ |
| Country of manuf | China |
| Radio 1 | |
| Chip1 | MediaTek MT7620N |
| Wireless interface OUI | none specified |
| Antenna Connector Type | RP-SMA |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented DrayTek devices with specifications, see DrayTek.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"WAPN23" and "8WAPN23B.0A1G" is silkscreened on the board in the FCC photos.
The FCC manual indicates...
- This device uses a MediaTek MT7620x WiSoC
- Additional models of VigorAP 820, VigorAP 710, and VigorFly 215 are noted as covered by this FCC ID
- An 00:76:20 OUI may be used
Probable used PSU
The device is shown w/ a Leader Electronics MU12AB120100-A1 in the FCC external photos.
| Leader Electronics MU12AB120100-A1 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 50/60 Hz, 0.4 A | |||||
| Input connector: NEMA 1-15P Style: small, horiz. Eff. level: 5 | |||||
| Output: 12 VDC, 1 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||