EasyAcc Wi-Stor Wizard
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |
|---|---|
| 'EasyAcc Wi-Stor Wizard' All in One - Wireless Digital Hub & Portable Wi-Fi Router & Wi-Fi Repeater & Emergency PowerBank | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
EasyAcc Wi-Stor Wizard |
| FCC ID |
none specified |
| Type |
wireless storage device |
| CPU1 |
Ralink RT5350 |
| CPU1 Type |
MIPS 24KEc |
| CPU1 Speed |
360 MHz |
| Flash1 Chip |
Winbond W25Q32BV |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
EtronTech EM63A165TS-6G |
| ETH chip1 |
Ralink RT5350 |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
| Stock bootloader |
U-Boot |
| Expansion IF types |
USB 2.0, SDHC |
| USB ports |
2 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Power |
5 VDC, 1 A |
| Connector type |
Micro USB |
| Serial Port (UART) |
yes, 4-pad header, (57600 8N1) |
|
Flags: battery | |
|
Additional chips | |
| Other | |
|
Default SSID: EasyAcc_XXXXXX | |
| 3rd Party Firmware Support | |
| Retail | |
| Availability | End of Life |
| ASIN |
B00NIQ1GN8  |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Ralink RT5350 |
| Wireless interface OUI |
00:0C:43 |
| Antenna Connector Type |
none specified |
| MIMO status |
1x1:1 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 150 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
1x1:1 assumed per chip
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
Support started version: 15.05
Current supported version: 22.03.7
On the OpenWrt Wiki
On the OpenWrt Forum
Support started version: 15.05
Current supported version: 22.03.7
Please insert instructions here
