Eclipse WiFi EW28650

bgn (N300)
In-Wall Access Point
WikiDevi.wi-cat.ru	Eclipse WiFi EW28650
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Eclipse WiFi EW28650
FCC ID	2AB4N-EW28650
Type	in-wall access point
CPU1	MediaTek MT7620N
CPU1 Type	MIPS 24KEc
CPU1 Speed	580 MHz
Flash1 Chip	Macronix Model?
Flash1 Size	? MiB
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	ESMT M14D5121632A-2.5B
ETH chip1	MediaTek MT7620N
Ethernet Port Count	1-100MbE-WAN 1-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
PoE	802.3af, standard
Power	48-56 VDC, ? A
Connector type	Ethernet (PoE)
Serial Port (UART)	yes, internal, 4-pin header, 3.3V TTL
Other
Default SSID: In Room WiFi Default IP address: 192.168.10.1 the IP 192.168.10.1 is used by 125 additional devices of which 0 are Eclipse WiFi devices Default login user: root Default login password: root root:root credentials used by 26 additional devices of which 0 are Eclipse WiFi devices
Retail
FCC approval date	02 April 2014
Country of manuf	Taiwan
Radio 1
Chip1	MediaTek MT7620N
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"P/N: 4600001-001", "WALL AP RF BOARD", and "REV : 0X0" appears to be silkscreened on the AP board in the FCC photos.

"P/N: 4600001-201__1__G", "WALL AP POWER BOARD", and "REV : 0B0" appears to be silkscreened on the power board.

Default settings (including the SSID) are per the FCC manual..