Edge-corE EAP102 v1
From TechInfoDepot
(Redirected from Edge-corE EAP102 1)
Jump to navigationJump to search
| abgn+ac+ax (AX30004S) | |
|---|---|
| Wi-Fi 6 Indoor Access Point | |
|
| |
| Homepage | Product page |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | Edge-corE EAP102 v1 |
| FCC ID (fcc.io) | none specified |
| FCC ID (fcc.report) | none specified |
| Type | access point |
| CPU1 | Qualcomm IPQ8070A |
| CPU1 Type | ARM Cortex-A53 |
| CPU1 Speed | 1.4 GHz ( 4 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND) |
| Flash2 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR) |
| RAM1 Size | 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Qualcomm IPQ8070A |
| ETH chip2 | Qualcomm Atheros QCA8081 |
| ETH chip3 | Qualcomm Atheros QCA8081 |
| Ethernet Port Count | 2-2.5GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab/3bz |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | USB 2.0 |
| USB ports | 2 |
| USB Hub Compatible | Untested |
| PoE | 802.3at, standard |
| Power | 12 VDC, 2 A |
| Connector type | barrel |
| Serial Port (UART) | yes, (115200 8N1) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Radio 1 | |
| Chip1 | Qualcomm QCN5124 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n/ax |
| 802.11ax | up to 574 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 22 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Qualcomm QCN5154 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 4x4:4 |
| Wireless Standard | IEEE 802.11a/n/ac/ax |
| 802.11ax | up to 2402 Mbps |
| 802.11ac | up to 1733 Mbps |
| 802.11n | up to 600 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented Edge-corE devices with specifications, see Edge-corE.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
OpenWrt Target: qualcommax
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 23.05.0
Current supported version: 24.10.4
OpenWrt Subtarget: ipq807x
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: 23.05.0
Current supported version: 24.10.4
LAN Comment: 2x Qualcomm Atheros QCA8081 2.5Gbe Phy
WLAN Hardware: Qualcomm QCN5124, Qualcomm QCN5154
WLAN Hardware: Qualcomm QCN5124, Qualcomm QCN5154
Please insert instructions here
Categories:
- Edge-corE
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ8070A
- Qualcomm
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System QCA8081
- Embedded System Qualcomm Atheros
- Qualcomm Atheros
- OpenWrt Supported
- Embedded System QCN5124
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System QCN5154
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation