Edge-corE EAP102 v1

From TechInfoDepot
Jump to navigationJump to search
abgn+ac+ax (AX30004S)
Wi-Fi 6 Indoor Access Point
Homepage Product page
3rd Party Firmware
dd-wrt Status Unknown
OpenWrt Supported
Tomato any flavor Incompatible
Gargoyle Status Unknown
Platform
Brand • Model • Rev Edge-corE EAP102 v1
FCC ID none specified
Type access point
CPU1 checkY Qualcomm IPQ8070A
CPU1 Type ARM Cortex-A53
CPU1 Speed 1.4 GHz ( 4 cores )
Flash1 Chip Brand? Model?
Flash1 Size 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (NAND)
Flash2 Size 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (SPI NOR)
RAM1 Size 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br />
RAM1 Chip Brand? Model?
ETH chip1 Qualcomm IPQ8070A
ETH chip2 Qualcomm Atheros QCA8081
ETH chip3 Qualcomm Atheros QCA8081
Ethernet Port Count 2-2.5GbE-LAN
Wired Standard IEEE 802.3i/3u/3ab/3bz

802dot11 OUI: none specified

Stock bootloader U-Boot
Expansion IF types USB 2.0
USB ports 2
USB Hub Compatible Untested
PoE 802.3at, standard
Power 12 VDC, 2 A
Connector type barrel
Serial Port (UART) yes, (115200 8N1)
Other
3rd Party Firmware Support OpenWrt • (List | Dev | DLs)
Radio 1
Chip1 Qualcomm QCN5124
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 2x2:2
Wireless Standard IEEE 802.11b/g/n/ax
802.11ax up to 574 Mbps
802.11n up to 300 Mbps
802.11g up to 54 Mbps
802.11b up to 22 Mbps
WiFi Operating Frequency 2.4 GHz
Radio 2
Chip1 Qualcomm QCN5154
Wireless interface OUI none specified
Antenna Connector Type none specified
MIMO status 4x4:4
Wireless Standard IEEE 802.11a/n/ac/ax
802.11ax up to 2402 Mbps
802.11ac up to 1733 Mbps
802.11n up to 600 Mbps
802.11a up to 54 Mbps
WiFi Operating Frequency 5 GHz

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

For a list of all currently documented Edge-corE devices with specifications, see Edge-corE.

• 574 Mbps - 2SS 2.4GHz 802.11ax (40MHz chan., 256-QAM),
• 2402 Mbps - 4SS 5GHz 802.11ax (80MHz chan., 1024-QAM) = AX3000 class

Flashing

Flashing OpenWrt

Target: qualcommax
Subtarget: ipq807x
Package architecture: aarch64_cortex-a53
Supported Since Commit
Support started version: 23.05.0
Current supported version: 24.10.5
LAN Comment: 2x Qualcomm Atheros QCA8081 2.5Gbe Phy
WLAN Hardware: Qualcomm QCN5124, Qualcomm QCN5154
Installation method(s):
U-Boot TFTP recovery, see git-commit
Recovery method(s):
U-Boot TFTP recovery, see git-commit
git • >>
ipq807x: add Edgecore EAP102
The Edgecore EAP102 is a wall/ceiling mountable AP. The AP can be
powered by either PoE or AC adapter.

Device info:
 - IPQ8071-A SoC
 - 1GiB RAM
 - 256MiB NAND flash
 - 32MiB SPI NOR
 - 2 Ethernet ports
 - 1 Console port
 - 2GHz/5GHz AX WLAN
 - 2 USB 2.0 ports

Install instructions:

Prerequistes - TFTP server, preferrably within 192.168.1.0/24
	       Console cable plugged in (115200 8N1 no flow control)

1. Power on device and interrupt u-boot to obtain u-boot CLI

2. set serverip to IP address of the TFTP server:

	`setenv serverip 192.168.1.250`

3. Download image from TFTP server:

	`tftpboot 0x44000000 openwrt-ipq807x-generic-edgecore_eap102-squashfs-nand-factory.ubi`

4. Flash ubi image to both partitions and reset:

	`sf probe
	 imxtract 0x44000000 ubi
	 nand device 0
	 nand erase 0x0 0x3400000
	 nand erase 0x3c00000 0x3400000
	 nand write $fileaddr 0x0 $filesize
	 nand write $fileaddr 0x3c00000 $filesize
	 reset`