Edge-corE ECW5110

abgn (AN600)
access point
WikiDevi.wi-cat.ru	Edge-corE ECW5110
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Edge-corE ECW5110
FCC ID	YZKWAP5110
Type	access point
CPU1	Atheros AR9344
CPU1 Type	MIPS 74Kc
CPU1 Speed	560 MHz 32-bit
Flash1 Chip	Macronix Model? x 2
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	EtronTech Model? x 2
ETH chip1	Atheros AR9344
ETH chip2	Atheros AR8031
Ethernet Port Count	1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	Mini PCIe (oversized)
Mini PCIe slots	1
PoE	802.3af, standard
Power	? VDC, ? A
Connector type	barrel
Serial Port (UART)	yes, RJ-45, (115200 8N1)
Flags: enterprise class
Other
Manuf/OEM/ODM	Accton EAP9112A-FLF-17
Retail
FCC approval date	30 April 2013
Radio 1
Chip1	Atheros AR9344
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio 2
Radio2 module	unknown
Radio2 module IF	Mini PCIe (oversized)
Chip1	Atheros Model?
Wireless interface OUI	none specified
Antenna Connector Type	U.FL
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Edge-corE device with specifications, see Edge-corE.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

The FCC test report indicates that this FCC ID covers the...

• SMC WAP5110-L (representative model)
• SMC WAP5110
• Edge-corE ECW5110-L
• Edge-corE ECW5110
• Accton EAP9112A-FLF-17

... with the only differences noted as being in firmware.

"P/N: 1420000000596A" and "REV: 01" is silkscreened on the board in the FCC photos.

"P/N: 142000000597A REV: 01" is silkscreened on the wireless module.

The wireless module is using three Skyworks (SiGe) SE5003L / 5003L 5GHz power amplfier ICs.

The power adapter included with the device may be a Sunny SYS1308-2412-W2 (100-240VAC ~ 50-60Hz, 1.0A -> 12VDC 2.0A).