Edimax EW-7733UnD
abgn (AN900) | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
450Mbps Wireless Dual-Band USB Adapter | |||||||||||
![]() | |||||||||||
Homepage | Product page | ||||||||||
Support | Support page | ||||||||||
Platform | |||||||||||
Brand • Model • Rev | Edimax EW-7733UnD | ||||||||||
Interface | USB 2.0 | ||||||||||
Connector | Male A | ||||||||||
Form factor | dongle | ||||||||||
ID:7392:7733 | |||||||||||
| |||||||||||
FCCID | NDD9577331111 | ||||||||||
Chip1 | Ralink RT3573 | ||||||||||
OUI: none specified | |||||||||||
MIMO status | 3x3:3 | ||||||||||
Wireless Standards | IEEE 802.11a/b/g/n | ||||||||||
802.11n | up to 450/450 Mbps | ||||||||||
802.11g | up to 54 Mbps | ||||||||||
802.11b | up to 11 Mbps | ||||||||||
802.11a | up to 54 Mbps | ||||||||||
Operating Frequency | 2.4 or 5 GHz | ||||||||||
Other | |||||||||||
Manuf/OEM/ODM | Edimax | ||||||||||
Flags: | |||||||||||
| |||||||||||
Probable Linux driver | |||||||||||
Windows driver | |||||||||||
Retail | |||||||||||
FCC approval date | 21 February 2012 | ||||||||||
UPC |
649659022867 (UPC DB, On eBay) | ||||||||||
ASIN |
B009IRLF5A ![]() | ||||||||||
Country of manuf | China | ||||||||||
|
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented Edimax devices with specifications, see Edimax.
Overview
This device is probably also sold as the...
- Intellinet 525275
- HiRO H50207
- Belkin F9L1103
Review of Linux Compatibility
The Edimax EW-7733UnD is a Wi-Fi USB stick which supports wireless network
- connections according to 802.11n. It has the USB ID 7392:7733:
lsusb Bus 002 Device 002: ID 7392:7733 Edimax Technology Co., Ltd
The EW-7733UnD bases on the Ralink RT3573 chipset. Although there is a patch available
- for the Linux kernel 3.12, which provides experimental support for the chipset of the stick,
- this driver does not load for the EW-7733UnD.
Instead, one has to use the Ralink driver, which is available for download at WikiDevi.
- This driver needs to be unpacked, and afterwards compiled and installed by hand:
sudo make clean sudo make sudo make install
These command compile and install the kernel module rt3573sta,
- which can be loaded into the kernel by:
sudo modprobe rt3573sta