egnite Ethernut 5
From TechInfoDepot
Jump to navigationJump to search| SBC FOR INDUSTRIAL APPLICATIONS | |
| Homepage | |
|---|---|
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
egnite Ethernut 5 |
| Type |
single-board computer |
| CPU1 |
Atmel AT91SAM9XE512 |
| CPU1 Speed |
200 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (NAND) |
| Flash2 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
? MiB (128) |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Atmel AT91SAM9XE512 |
| Ethernet Port Count |
1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
| |
| Stock bootloader |
U-Boot |
| Expansion IF types |
SD, USB 2.0 |
| USB ports |
2 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| PoE |
802.3af, standard |
| Power |
5-24 VDC, ? A |
| Connector type |
barrel |
| Serial Port (UART) |
Yes |
| JTAG Port |
Yes |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 17.01.1
Current supported version: 23.05.5
OpenWrt Target: at91
OpenWrt Subtarget: sam9x
OpenWrt Package architecture: arm_arm926ej-s
Support started version: 17.01.1
Current supported version: 23.05.5
Please insert instructions here
