Embarq EQ-660R
From TechInfoDepot
Jump to navigationJump to search
| EQ-660R ADSL Router | |
| WikiDevi.wi-cat.ru | Embarq EQ-660R |
|---|---|
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Status Unknown |
| Tomato any flavor | Incompatible |
| Platform | |
| Brand • Model • Rev | Embarq EQ-660R |
| Type | dsl modem |
| CPU1 | Texas Instruments TNETD7200 |
| CPU1 Type | MIPS 4KEc |
| CPU1 Speed | 212 MHz |
| Flash1 Chip | Macronix MX29LV160CBTC-70G |
| Flash1 Size | 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size | 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip | Winbond W9864G6GH-7 |
| ETH chip1 | Texas Instruments TNETD7200 |
| Ethernet Port Count | 1-100MbE-LAN |
| Wired Standard | IEEE 802.3i/3u |
| Stock bootloader | Bootbase V1.03 |
| Stock FW OS | ZyNOS V3.40(ACZ.8) |
| Expansion IF types | none specified |
| Power | 9 VAC ~ ? Hz, 1 A |
| Connector type | barrel |
| Serial Port (UART) | yes, internal, 5-pin header, populated, 3.3V TTL, (9600 8N1), J1 |
|
| |
|
| |
| Other | |
|
| |
| Manuf/OEM/ODM | ZyXEL |
| Retail | |
| (Est.) release date | July 2007 |
| ASIN |
B002YBK9FY |
| Country of manuf | China |
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview
The ZyXEL logo, "45-401-000471", "Made in China", and a date code of 0722 is silkscreened on one EQ-660R's board.
JTAG-Serial Info
Serial
Serial Pinouts
The same pinout is used by the ZyXEL HomeSafe 100W (HS-100W).
[3.3] (TxD) (RxD) (GND) J1
Credentials
The default console password is 1234.
Boot log w/ reset
Bootbase Version: V1.03 | 05/25/2005 03:15:00 RAM: Size = 16384 Kbytes FLASH: AMD 16M *1 ZyNOS Version: V3.40(ACZ.8) | 06/11/2007 20:38:00 Press any key to enter debug mode within 3 seconds. ............................................................ Restore default Romfile............. Console speed will be changed to 9600 bps Copyright (c) 1994 - 2004 ZyXEL Communications Corp. initialize ch = 0, ethernet address: 00:19:cb:28:32:40 Wan Channel init ........ done ................................................................................................... done Press ENTER to continue...