EnGenius ECB9500
From TechInfoDepot
Jump to navigationJump to search
bgn (N300) | |||||
---|---|---|---|---|---|
Wireless N 300Mbps Access Point/Bridge/Repeater/Router with Gigabit and 802.3af PoE | |||||
| |||||
Homepage | Product page | ||||
InfoDepot Wiki | EnGenius ECB-9500 | ||||
3rd Party Firmware | |||||
dd-wrt | Activation Required | ||||
OpenWrt | Status Unknown | ||||
Tomato any flavor | Incompatible | ||||
Gargoyle | Status Unknown | ||||
Platform | |||||
Brand • Model • Rev | EnGenius ECB9500 | ||||
FCC ID | U2M-CB97508001 | ||||
IC ID | 3616C-CB975081 | ||||
Board ID | 7016A0193020 | ||||
Type | access point, bridge, repeater | ||||
CPU1 ![]() | Ralink RT2880 | ||||
CPU1 Type | MIPS 4KEc | ||||
CPU1 Speed | 266 MHz | ||||
Flash1 Chip | STMicro M29W64DFT | ||||
Flash1 Size | 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
RAM1 Size | 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip | EtronTech EM639165TS-6G x 2 | ||||
ETH chip1 | Ralink RT2880 | ||||
ETH chip2 | Marvell 88E1116 | ||||
Ethernet Port Count | 1-1GbE-LAN | ||||
Wired Standard | IEEE 802.3/3u/3ab | ||||
Stock bootloader | U-Boot 1.1.3 | ||||
Stock FW OS | Linux 2.4.30 | ||||
Expansion IF types | none specified | ||||
PoE | 802.3af, standard | ||||
Power | 12 VDC, 1 A | ||||
Connector type | barrel | ||||
Serial Port (UART) | yes, 6-pin header, (57600 8N1), 3.3V TTL | ||||
| |||||
| |||||
Other | |||||
Default IP address: 192.168.1.2 | |||||
Manuf/OEM/ODM | Senao ECB-9750 | ||||
3rd Party Firmware Support |
DD-WRT • (List) | ||||
Retail | |||||
FCC approval date | 07 July 2009 | ||||
UPC |
655216003804 (UPC DB, On eBay) | ||||
ASIN |
B001UHPR1O ![]() | ||||
Country of manuf | Taiwan | ||||
Radio 1 | |||||
Chip1 | Ralink RT2880 | ||||
Chip2 | Ralink RT2820 | ||||
Wireless interface OUI | 00:02:6F | ||||
Antenna Connector Type | U.FL, RP-TNC | ||||
MIMO status | 2x3:2 | ||||
Wireless Standard | IEEE 802.11b/g/n | ||||
802.11n | up to 300 Mbps | ||||
802.11g | up to 54 Mbps | ||||
802.11b | up to 11 Mbps | ||||
WiFi Operating Frequency | 2.4 GHz | ||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented EnGenius devices with specifications, see EnGenius.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"ECB-9750-1.20 LFP" and "7016A0193020" is silkscreened
- on the board in the FCC photos (Senao).
The default SSID may be EnGeniusXXXXXX.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
![]() | DD-WRT Activation Required. |
Supported by dd-wrt as of = ECB9750 build - 25.12.08
Please insert instructions here
Pictures
Categories:
- EnGenius
- Embedded system/access point
- Embedded system/bridge
- Embedded system/repeater
- Embedded System Ralink
- Embedded System RT2880
- Ralink
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System 88E1116
- Embedded System Marvell
- Marvell
- Manuf Senao
- DD-WRT Supported
- Embedded System RT2820
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Single-Band
- DD-WRT Activation Required
- English Documentation