EnGenius EMD1
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC1300) | |
|---|---|
| EnMesh Whole Home WiFi System Mesh Dot | |
|
| |
| Homepage | Product page |
| WikiDevi.wi-cat.ru | EnGenius EnMesh Dot (EMD1) |
| 3rd Party Firmware | |
| dd-wrt | Status Unknown |
| OpenWrt | Supported |
| Tomato any flavor | Incompatible |
| Gargoyle | Status Unknown |
| Platform | |
| Brand • Model • Rev | EnGenius EMD1 |
| FCC ID (fcc.io) | A8J/-EMD1 |
| FCC ID (fcc.report) | A8J/-EMD1 |
| Type | access point |
| CPU1 | Qualcomm IPQ4018 |
| CPU1 Type | ARMv7 Cortex-A7 |
| CPU1 Speed | 710 MHz ( 4 cores ) |
| Flash1 Chip | Brand? Model? |
| Flash1 Size | 32 MiB 33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip | Brand? Model? |
| ETH chip1 | Qualcomm IPQ4018 |
| ETH chip2 | Qualcomm Atheros QCA8072 |
| Ethernet Port Count | 1-1GbE-LAN |
| Wired Standard | IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader | U-Boot |
| Expansion IF types | none specified |
| Power | 100-240 VAC ~ 50/60 Hz, 1 A |
| Connector type | AC (direct) |
|
| |
|
| |
| Other | |
|
| |
| 3rd Party Firmware Support |
OpenWrt • (List | Dev | DLs) |
| Retail | |
| Availability | End of Life |
| Radio 1 | |
| Chip1 | Qualcomm IPQ4018 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11b/g/n |
| N-QAM | up to 400 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11g | up to 54 Mbps |
| 802.11b | up to 11 Mbps |
| WiFi Operating Frequency | 2.4 GHz |
| Radio 2 | |
| Chip1 | Qualcomm IPQ4018 |
| Wireless interface OUI | none specified |
| Antenna Connector Type | none specified |
| MIMO status | 2x2:2 |
| Wireless Standard | IEEE 802.11a/n/ac |
| 802.11ac | up to 867 Mbps |
| 802.11n | up to 300 Mbps |
| 802.11a | up to 54 Mbps |
| WiFi Operating Frequency | 5 GHz |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented EnGenius devices with specifications, see EnGenius.
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
Target: ipq40xx
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.0
Current supported version: EOL
Last Supported Version: 22.03.7
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.0
Current supported version: EOL
Last Supported Version: 22.03.7
LAN Hardware: Qualcomm Atheros QCA8072
WLAN Hardware: Qualcomm Atheros IPQ4018
WLAN Comment: 2x2:2 MIMO
Installation method(s):
GUI OEM, see git-commit
Recovery method(s):
U-Boot TFTP recovery, see git-commit
Comment:
Missing DSA Setup for 23.05+
WLAN Hardware: Qualcomm Atheros IPQ4018
WLAN Comment: 2x2:2 MIMO
Installation method(s):
GUI OEM, see git-commit
Recovery method(s):
U-Boot TFTP recovery, see git-commit
Comment:
Missing DSA Setup for 23.05+
| git • >> |
|---|
ipq40xx: add support for EnGenius EMD1 SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (1 port) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMD1. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset |
Categories:
- EnGenius
- Embedded system/access point
- Embedded System Qualcomm
- Embedded System IPQ4018
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System QCA8072
- Embedded System Qualcomm Atheros
- Qualcomm Atheros
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation