EnGenius EMR3500
From TechInfoDepot
Jump to navigationJump to search
| abgn+ac (AC1300) | |||||
|---|---|---|---|---|---|
| AC1300D Dual-Band Mesh Router | |||||
|
| |||||
| Homepage | Product page | ||||
| WikiDevi.wi-cat.ru | EnGenius EMR3500 | ||||
| 3rd Party Firmware | |||||
| dd-wrt | Status Unknown | ||||
| OpenWrt | Was Supported | ||||
| Tomato any flavor | Incompatible | ||||
| Gargoyle | Status Unknown | ||||
| Platform | |||||
| Brand • Model • Rev | EnGenius EMR3500 | ||||
| FCC ID | A8J-EMR3500 | ||||
| Board ID | 7016A1736014 | ||||
| Type | wireless router, mesh node | ||||
| CPU1 | Qualcomm IPQ4018 | ||||
| CPU1 Type | ARMv7 Cortex-A7 | ||||
| CPU1 Speed | 717 MHz ( 4 cores ) | ||||
| Flash1 Chip | Brand? Model? | ||||
| Flash1 Size | 128 MiB 134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||
| RAM1 Size | 256 MiB 268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||
| RAM1 Chip | Nanya NT5CC128M16JR-EK | ||||
| ETH chip1 | Qualcomm IPQ4018 | ||||
| Switch | Qualcomm Atheros QCA8072 | ||||
| Ethernet Port Count |
1-1GbE-WAN 1-1GbE-LAN | ||||
| Wired Standard | IEEE 802.3i/3u/3ab | ||||
|
802dot11 OUI: none specified | |||||
| Stock bootloader | U-Boot | ||||
| Expansion IF types | USB 2.0 | ||||
| USB ports | 1 | ||||
| USB Hub Compatible | Untested | ||||
| Power | 12 VDC, 1 A | ||||
| Connector type | barrel | ||||
|
Flags: | |||||
|
| |||||
| Other | |||||
|
Default SSID: ESRetupXXXXXX (1 addl. devices) | |||||
| Manuf/OEM/ODM | Senao | ||||
| 3rd Party Firmware Support |
OpenWrt (Was) | ||||
| Retail | |||||
| Availability | End of Life | ||||
| FCC approval date | 27 March 2019 | ||||
| (Est.) release date | April 2019 | ||||
| Country of manuf | Taiwan | ||||
| Radio 1 | |||||
| Chip1 | Qualcomm IPQ4018 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | none specified | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11b/g/n | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11g | up to 54 Mbps | ||||
| 802.11b | up to 11 Mbps | ||||
| WiFi Operating Frequency | 2.4 GHz | ||||
| Radio 2 | |||||
| Chip1 | Qualcomm IPQ4018 | ||||
| Wireless interface OUI | none specified | ||||
| Antenna Connector Type | none specified | ||||
| MIMO status | 2x2:2 | ||||
| Wireless Standard | IEEE 802.11a/n/ac | ||||
| 802.11ac | up to 867 Mbps | ||||
| 802.11n | up to 300 Mbps | ||||
| 802.11a | up to 54 Mbps | ||||
| WiFi Operating Frequency | 5 GHz | ||||
| |||||
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented EnGenius devices with specifications, see EnGenius.
Overview
"7016A1736014 Ver-1.10 LFP" is silkscreened on the board in the FCC photos.
- The EnGenius ESR530 is electrically identical.
Links of Interest
News
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
| This device is NO LONGER SUPPORTED OR POSSIBLE for future use with OpenWrt. |
Target: ipq40xx
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.0
Current supported version: EOL
Last Supported Version: 21.02.7
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Supported Since Commit
Support started version: 21.02.0
Current supported version: EOL
Last Supported Version: 21.02.7
Unsupported Functions:
Final release 21.02.7
LAN Hardware: Qualcomm Atheros QCA8072
WLAN Hardware: Qualcomm Atheros IPQ4018
Installation method(s):
GUI OEM
Recovery method(s):
U-Boot TFTP recovery, see git-commit
Comment:
Missing DSA Setup for 23.05+
Final release 21.02.7
LAN Hardware: Qualcomm Atheros QCA8072
WLAN Hardware: Qualcomm Atheros IPQ4018
Installation method(s):
GUI OEM
Recovery method(s):
U-Boot TFTP recovery, see git-commit
Comment:
Missing DSA Setup for 23.05+
| git • >> |
|---|
ipq40xx: add support for EnGenius EMR3500 SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (2 ports) USB: 1 x 2.0 (Host controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emr3500-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMR3500. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emr3500-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset |
Categories:
- EnGenius
- Embedded system/wireless router
- Embedded system/mesh node
- Embedded System Qualcomm
- Embedded System IPQ4018
- Qualcomm
- Embedded System ARMv7
- Embedded System Cortex-A7
- Embedded System Qualcomm Atheros
- Embedded System QCA8072
- Qualcomm Atheros
- Manuf Senao
- OpenWrt Was Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation